How to Deal with Wind Whistling in the Cabin?

How to Identify China VI Vehicles?

There will be labels indicating China VI vehicles when purchasing a car. Relevant introduction: 1. Brief introduction: The "China VI" standard adopts the same limit requirements for gasoline and diesel vehicles based on the fuel-neutral principle. 2. Specific content: The total hydrocarbons (THC, also known as hydrocarbons) standard has been raised from 100mg/km to 50mg/km; non-methane hydrocarbons (NMHC, all hydrocarbons except methane) emissions have been reduced from 68mg/km to 35mg/km; nitrogen oxides (NOx) have been reduced from 60mg/km to 30mg/km; particulate matter mass (PM) has been reduced from 4.5mg/km to 3.0mg/km. That is, carbon monoxide emissions, total hydrocarbons, and non-methane total hydrocarbons must be reduced by more than 50% on the original basis.

5

3

Share

What does the KIA logo mean?

KIA's logo is 'KIA', which means 'to rise from Asia and go global'. It can be split into 'KI' and 'A', where 'KI' in Korean means 'to rise', and 'A' is the abbreviation for Asia. The meaning of the KIA logo is as follows: KIA Motors is a Korean car brand, and the logo 'KIA' is also interpreted from Korean. In Korean, 'KI' means 'to rise', and 'A' is the first letter of 'Asia'. The full phrase translates to 'to come up out of Asia to the world', meaning 'to rise from Asia and go global'. After entering the Chinese market, it was naturally called 'KIA' due to its phonetic similarity. The KIA logo embodies a bold and aspirational vision, symbolizing the brand's ambition to start from Asia and expand globally.

14

2

Share

How Many Days to Break in New Brake Pads?

New brake pads require a break-in period of approximately 200 kilometers to achieve optimal braking performance. Here is relevant information about brake pads: 1. Brake pad classification: Asbestos brake pads (mostly phased out), semi-metallic brake pads, low-metallic brake pads, NAO formula brake pads, ceramic brake pads, and NAO ceramic brake pads. 2. Ceramic vs traditional brake pads: In traditional brake pads, metal serves as the primary friction material, providing strong braking force but with greater wear and tendency for noise generation. After installing ceramic brake pads, abnormal squealing (scraping sounds) won't occur during normal driving. Since ceramic brake pads contain no metal components, they eliminate the metallic screeching caused by friction between traditional metal brake pads and their counterparts (brake pads and rotors). 3. Stable friction coefficient: Conventional brake pads use immature friction materials where excessively high friction coefficients may lead to dangerous situations like loss of steering control during braking, pad burning, or rotor scoring. Even when rotor temperatures reach 650°C, ceramic brake pads maintain a stable friction coefficient between 0.45-0.55, ensuring reliable braking performance.

6

0

Share

Where is the motorcycle spark plug located?

Most spark plugs are located at the front right side of the engine, while a few may be positioned at the front left side. Generally, you can see them by removing the storage compartment under the seat or the small front panel beneath the seat. What components make up a spark plug: A spark plug mainly consists of a terminal nut, insulator, terminal stud, center electrode, side electrode, and shell. What types of spark plugs are there: The main types of spark plugs include: standard spark plugs, projected insulator spark plugs, electrode-type spark plugs, seat-type spark plugs, pin-type spark plugs, and surface-gap spark plugs. Replacement cycle for spark plugs: Under normal maintenance conditions, spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is recommended to follow the user manual. Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers.

16

5

Share

Which Year's Cars Comply with China IV Emission Standard?

Cars produced after July 1, 2011 comply with the China IV standard. The China V emission standard was implemented on July 1, 2017, so vehicles meeting China IV standards were manufactured between 2011 and 2017. The latest emission standard is China VI, which took effect on July 1, 2019. Below is relevant information about emission standards: 1. Reason: With increasingly severe global environmental pollution issues, countries worldwide are implementing stricter emission standards. 2. Function: Strict emission standards are designed to regulate automakers. Under these standards, manufacturers actively develop new technologies to reduce engine exhaust emissions. 3. Development Trend: Pure electric vehicles represent the future of automotive development. As they produce no exhaust emissions, they contribute significantly to environmental protection.

18

3

Share

Does changing the rims affect the annual inspection?

According to Article 10 of the "Motor Vehicle Registration Regulations": Changing the rims requires registration with the vehicle management office, otherwise it will not pass the annual inspection. Common knowledge about car rim modifications: 1. Choose the appropriate rim type: Different vehicle models require different rim choices. Do not assume that you can install any type of rim you want. Rims are mainly divided into steel rims, aluminum alloy rims, and magnesium alloy rims. Steel rims are the heaviest and relatively the cheapest, aluminum alloy rims are lighter than steel rims, and magnesium alloy rims are even lighter and softer, with better acceleration performance. However, they are mainly used in racing cars and can only be used on civilian vehicles in areas with excellent road conditions. 2. Use compatible tire types: Rim upgrades should be synchronized with tires. When modifying rims, it is essential to upgrade the tires simultaneously because the size of the tires is closely related to the size of the rims. Some car owners may choose used tires, which is an unwise decision. Used tires have a certain gap in tread life compared to new tires, posing potential safety hazards. Therefore, new tires should be selected for rim upgrades.

14

5

Share

How to Deal with Wind Whistling in the Cabin?

How to Identify China VI Vehicles?

What does the KIA logo mean?

How Many Days to Break in New Brake Pads?

Where is the motorcycle spark plug located?

Which Year's Cars Comply with China IV Emission Standard?

Does changing the rims affect the annual inspection?

What Causes Scratches on Car Brake Discs?

Where is the fuel tank cap switch located?

How to Handle a Lost Out-of-Town Driver's License?

What is the Appropriate Range for Long-Term Fuel Trim?