How to Deal with White Oxidation Spots on Engine Block?

Which One is the Brake and Which One is the Accelerator?

Brake and accelerator positions vary depending on the vehicle model: 1. In automatic transmission vehicles, the left pedal is the brake, and the right pedal is the accelerator; 2. In manual transmission vehicles, the middle pedal is the brake, and the right pedal is the accelerator. Function of the accelerator: It controls the engine's output power and generates thrust by regulating the throttle opening of the carburetor to manage cylinder filling and the metered fuel flow of the fuel regulator. The brake serves to reduce vehicle speed, and its usage considerations include: 1. Apply brakes gently when following another vehicle; 2. Use emergency braking cautiously in rainy conditions; 3. Avoid sudden braking on slopes and curves.

1

3

Share

What Are the Solutions for Changing Engine Oil Without a Lift?

The solutions for changing engine oil without a lift are: 1. Find a pit, drive the car over it, then go down into the pit to change the oil; 2. Use an oil extraction machine to pump out the old oil, then add new oil. The functions of engine oil are: lubrication and anti-wear, auxiliary cooling, cleaning, sealing and leak prevention, rust and corrosion prevention, and shock absorption. Precautions for changing engine oil: 1. Perform the change while the engine is warm to ensure the old oil is drained as completely as possible; 2. Add oil and ensure the amount is appropriate; 3. After adding oil, start the engine to check for any leaks, then run the engine for 3 minutes to confirm the oil level is at the normal mark.

10

4

Share

What is the replacement interval for Santana coolant?

The replacement interval for Santana coolant is 60,000 kilometers, with a replacement capacity of 4 liters. Taking the 2021 manual Fengshang version Santana as an example, its body dimensions are: length 4475mm, width 1706mm, height 1469mm, wheelbase 2603mm, fuel tank capacity 52.8 liters, and trunk capacity 466 liters. The 2021 manual Fengshang version Santana features a MacPherson strut front suspension and a compound torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 112PS, maximum power of 82kW, and maximum torque of 145Nm.

14

1

Share

Is ETC unnecessary if I don't drive on highways?

ETC is unnecessary if you don't drive on highways. ETC, or Electronic Toll Collection, is a system that enables vehicles to pass through toll stations without stopping. It uses onboard equipment to identify vehicles, record information, and automatically deduct the corresponding funds from a pre-bound IC card or bank card. ETC is a road toll method specifically designed for toll roads, commonly found on highways, bridges or tunnels with toll policies, and certain sections of urban centers to alleviate traffic congestion. To unbind a vehicle from an ETC card: Bring the vehicle owner's ID card, vehicle registration certificate, ETC card, and OBU device to an ETC service center for removal, then use the removal certificate issued by the ETC service center to terminate the contract at the contracted bank.

15

4

Share

Do I Need to Change Tires When Replacing Car Rims?

Whether you need to change tires when replacing car rims depends on the situation: 1. If you replace with rims of the same model, there is no need to change the tires; 2. If you replace with rims of a different model, you need to change the tires to match the new rims. The maintenance methods for rims are: 1. When the vehicle is in a humid area, the rims should be cleaned frequently to prevent salt from corroding the aluminum surface; 2. If necessary, after cleaning, you can wax the rims to maintain their luster; 3. When the rims are at a high temperature, let them cool naturally before cleaning. Do not use cold water to clean them, as it may damage the aluminum rims, deform the brake discs, and affect braking performance. Using detergent to clean the rims may cause chemical reactions on the surface and result in loss of luster.

16

4

Share

How to Turn Off the Lock Beep on the Buick Excelle?

The method to turn off the lock beep on the Buick Excelle is: 1. Press the settings screen button and rotate the menu button; 2. Select the vehicle option, where you will see options for air conditioning and air quality, lights and door locks, remote key, collision warning, and factory reset; 3. Choose the remote key option, then remote door lock feedback; 4. Change the feedback type when remotely locking the vehicle. Taking the 2018 Buick Excelle as an example, it belongs to the compact car category with body dimensions of: length 4609mm, width 1798mm, height 1486mm, a wheelbase of 2640mm, a fuel tank capacity of 44 liters, and a trunk capacity of 400 liters.

5

Share

How to Deal with White Oxidation Spots on Engine Block?

Which One is the Brake and Which One is the Accelerator?

What Are the Solutions for Changing Engine Oil Without a Lift?

What is the replacement interval for Santana coolant?

Is ETC unnecessary if I don't drive on highways?

Do I Need to Change Tires When Replacing Car Rims?

How to Turn Off the Lock Beep on the Buick Excelle?

How to Turn on the Car Headlights?

How many digits does a general vehicle frame number have?

Is the Tiggo 5x engine domestically produced or joint-venture?

What brand is the Dorcen G70s?