···
Log in / Register

How to Deal with Water Leakage from the Sunroof and Water Intrusion Inside the Car?

3 Answers
WestonLynn
09/08/25 3:22am
Water leakage from the roof is most likely due to aging sunroof sealing strips, which require timely replacement by the owner. If cracks appear on the roof, leading to water leakage, it is recommended to perform panel beating and repainting. It is necessary to clean and unclog the drainage pipes. Point the nozzle of a high-pressure air gun at the inlet of the sunroof's drainage hole and use high-pressure airflow to blow out debris from the outlet of the drainage hole. Regularly clean the sunroof tracks to prevent dust accumulation and check the lubrication condition of the tracks.
Was this review help?
8
1
Share
LincolnLynn
09/20/25 2:09am
Last month, my car's sunroof leaked, and the floor inside got all wet. I immediately pulled over to a safe spot, grabbed a dry towel to soak up the water to prevent it from spreading to the electronics, then used a hairdryer to dry the edges of the carpet to avoid mold. After that, I checked the sunroof and found that the sealing strip had aged and developed small gaps, allowing rainwater to seep in. I went to the hardware store to buy a new sealing strip and replaced it myself—saving money and time. I also make sure to park away from areas with lots of leaves to prevent clogging the drainage holes. After water gets in, it's important to check if the wiring under the floor is damaged, as it could affect the airbags. So, I recommend getting a full inspection at a professional shop this weekend for peace of mind.
Was this review help?
2
0
Share
Expand All
AidenAnn
11/03/25 2:33am
When driving in the rain, I encountered a leaking sunroof with water droplets dripping onto the seats, which was quite annoying. The first step is to ensure safety: slow down, pull over, and turn on the hazard lights. Avoid turning on the AC immediately to prevent water from entering the system. If you have a vacuum cleaner handy, it's best to suck up the water stains, or use old clothes as rags to wipe them. Next, locate the source of the leak—usually, it's due to clogged drainage tubes or cracked seals. A simple fix is to use a wire to unclog the drainage holes. For long-term maintenance, regularly clean the sunroof gaps and apply lubricant to the tracks. After water ingress, the interior can develop odors, so placing a dehumidifying charcoal bag helps disperse moisture and prevent bacterial growth. Remember, don’t wait until the problem becomes severe to fix it—small issues turning into big ones will cost you more in the long run.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

Can the clutch be released directly in second gear?

No, the clutch cannot be released directly. Here is the relevant introduction about the clutch: Clutch: The clutch is located in the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. During driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and the transmission, thereby cutting off or transmitting the power from the engine to the transmission. The principle of releasing the clutch: The principle of releasing the clutch is: "slow at first, fast in the middle, and coordinated at the end." When initially pressing down, it should be done quickly and all the way to the bottom. When lifting the pedal, the free travel should be quick, slow when nearing contact, and pause slightly at the semi-engagement point before releasing completely. The key point of this process is to accurately locate the semi-engagement point. To control the vehicle speed effectively, the semi-engagement point serves as the boundary: lifting quickly above it and lowering slowly below it, adjusting downward to select a speed suitable for oneself.
8
1
Share

What to Do When the Buick Anti-Theft System is Activated and the Car Won't Start?

Insert the key, turn it to power on the entire vehicle, then turn it off. Repeat this process three times consecutively. Disconnect the negative terminal of the battery for about ten seconds to clear the engine's protection data, then reconnect the battery and attempt to start the car again. It is normal for the car's engine anti-theft light to flash once every 1 to 2 seconds.
19
4
Share

Why does the fifth gear automatically disengage on the highway?

Here are the reasons why the fifth gear automatically disengages on the highway: 1. High-speed gear disengagement: High-speed gear disengagement refers to the automatic shift of the transmission from a high gear back to neutral while the car is moving. 2. Reasons: Due to long-term wear on the engaging bodies of the inertia lock ring or the synchronizer cone ring and the internal engaging teeth on the sliding sleeve, a conical shape is formed, thereby generating axial thrust on the engaging teeth. At high speeds, when this thrust exceeds the locking force of the gear spring, gear disengagement occurs. Here is extended information on specific policies for free highway passage: 1. Regulations: According to the "Implementation Plan for Exempting Toll Fees for Small Passenger Vehicles During Major Holidays," the free passage period covers four national statutory holidays—Spring Festival, Tomb-Sweeping Day, Labor Day, and National Day—as well as the consecutive rest days of these statutory holidays as determined by documents from the General Office of the State Council in the current year. 2. Free period: The free period starts at 00:00 on the first day of the holiday and ends at 24:00 on the last day of the holiday.
6
1
Share

How to Connect Bluetooth to Play Music in a Honda Car?

First, establish a pairing relationship between your phone and the car's Bluetooth device by enabling the Bluetooth function on both your phone and the car's Bluetooth device. Then, search for Bluetooth devices on your phone and select the car's Bluetooth device to pair and connect. Once the car's Bluetooth is successfully paired and connected with your phone's Bluetooth, you can make and receive calls, as well as play music from your phone.
13
4
Share

How to Remove the Glove Box of a Buick Regal?

First, open the glove box on the passenger side. There is a screw in each of these four positions, remove them using a 7MM socket. After removing the four screws, gently lift upwards to detach the glove box. You will see a rectangular box in the middle, which is the cover for the cabin air filter. Push both sides outward and press the middle part to open it, then remove the cabin air filter.
10
2
Share

What does it mean when the Porsche engine yellow light stays on?

The reasons for the Porsche engine yellow light staying on are as follows: 1. Sensor issues: Sensors include those for coolant temperature, crankshaft position, air flow, intake air temperature, oxygen, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the car's ECU cannot accurately obtain engine data, which will trigger the engine fault light. 2. Maintenance issues: Poor engine maintenance is the most common cause of the engine fault light coming on. If the owner does not perform regular maintenance and has poor driving habits, it will increase the burden on the engine, eventually causing the maintenance fault light to illuminate. 3. Fuel quality issues: Fuel quality includes both fuel and oil. The fuel used in cars usually has a specific grade, and oil can be semi-synthetic or fully synthetic. Owners need to use the oil grade recommended by the manufacturer. If the owner does not add the required oil, it will cause engine wear over time, and the fault light will come on. 4. Poor combustion of the air-fuel mixture: Engine spark plug failure, ignition coil failure, fuel pump failure, or fuel line blockage can all cause poor combustion of the engine's air-fuel mixture. 5. Air intake issues: The engine needs air intake during combustion, and the air filter plays a crucial role in this process. If the car's air filter is not clean and not regularly cleaned, it will affect the car's air intake. Over time, this can lead to blockages, causing the engine fault light to illuminate.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.