How to Deal with Water in the Trunk?

1 Answers
MacAustin
07/25/25 3:38pm
Methods to handle water in the trunk are: 1. First, remove the water to prevent rusting of the metal parts inside the trunk; 2. Check if the trunk lid is deformed and if the surrounding rubber seals have aged. Use a hose to spray water and observe where water leaks in or where light comes through when the trunk is closed, then mark these spots; 3. Purchase a bottle of silicone sealant, open the trunk, remove the interior trim panel, and apply the sealant to the marked areas. It's best to seal from the outside, and the rear bumper may need to be removed for proper sealing; 4. For aged rubber seals, replace them with new ones at an auto repair shop.
Was this review help?
3
5
Share
More Forum Discussions

Is the Three-Way Catalytic Cleaner Effective?

The three-way catalytic cleaner is effective, and its functions include: 1. Helping to improve vehicle engine performance; 2. Reducing frequent alarms from the exhaust system's oxygen sensor. The three-way catalytic converter is an important external purification device installed in the vehicle's exhaust system, which converts carbon monoxide, hydrocarbons, and nitrogen oxides in the exhaust gas into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. The steps for cleaning the three-way catalytic converter are: 1. Use a lift to raise the vehicle and remove the three-way catalytic converter; 2. Soak and clean the three-way catalytic converter with oxalic acid solution, then rinse it with clean water; 3. Reinstall the cleaned three-way catalytic converter and start the vehicle for testing.
14
0
Share

What Maintenance Should Be Done on a Car in Winter?

Car maintenance tasks to be done in winter include: 1. Adding antifreeze in time; 2. Changing the engine oil; 3. Battery maintenance; 4. Tire and brake maintenance; 5. Windshield washer fluid maintenance; 6. Waxing; 7. Wiper blade maintenance; 8. Warming up the car before driving. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. The purpose of car maintenance is to keep the car clean, in normal technical condition, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life.
15
0
Share

What are the common issues with the CR-V hybrid?

The common issues with the CR-V hybrid include: 1. Poor sound insulation with noticeable gaps between metal and plastic panels, plus sluggish infotainment system response; 2. Piercing engine noise during sudden acceleration with slight air leakage near footwells; 3. Insufficient climbing power; 4. Significant tire noise during highway driving. Taking the 2021 CR-V as an example, its dimensions are: length 4621mm, width 1855mm, height 1679mm, with a wheelbase of 2661mm. The 2021 CR-V is equipped with a 1.5T turbocharged engine delivering 142kW maximum power and 243Nm peak torque, paired with a 6-speed manual transmission.
6
0
Share

What Causes the Red Battery Warning Light in a Car?

The red battery warning light in a car is caused by: 1. Failure to turn off electrical appliances in the car when getting off, resulting in the battery being completely drained; 2. Problems with the generator not producing electricity or short circuits in the car's wiring, causing severe battery drain; 3. The battery itself being severely sulfated, aged, internally broken, or short-circuited. The functions of a car battery are to store and supply electricity. Its maintenance methods include: 1. Avoid parking the car in an open-air parking lot for extended periods; 2. Avoid multiple uninterrupted starts; 3. Regularly check the battery's accessories and connecting circuits; 4. Avoid using car electrical appliances after the engine is turned off.
18
0
Share

What is the purpose of adjustable suspension stiffness in cars?

The purpose of adjustable suspension stiffness in cars is to achieve a balance and switch between handling performance and comfort. Vehicles with adjustable suspension stiffness can be divided into: 1. Those where the driver actively controls the suspension stiffness via buttons; 2. Those where the vehicle automatically adjusts suspension stiffness based on driving speed or sensor data, without allowing the driver to manually change it. The adjustable suspension stiffness modes typically include Normal, Sport, and Comfort. This is achieved by the control unit adjusting the valve on the shock absorber, controlling the circulation of hydraulic fluid inside the shock absorber, and thereby changing the damping coefficient of the shock absorber.
17
1
Share

How to Remove the Rear Seats of a Skoda Octavia?

The method to remove the rear seats of a Skoda Octavia is: 1. Lift the rear seat cushion upwards with force to release the clips on both sides; 2. Push backwards firmly to unhook the two hooks underneath the rear part. The Skoda Octavia has a body size of: length 4675mm, width 1814mm, height 1460mm, with a wheelbase of 2686mm, a fuel tank capacity of 51 liters, and a body structure of a 5-door, 5-seat hatchback. The Skoda Octavia is equipped with a 1.2T turbocharged engine, delivering a maximum power of 85kW and a maximum torque of 200Nm, paired with a 7-speed dual-clutch transmission.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.