How to Deal with Water in Fog Lights?

1 Answers
DeAmir
07/30/25 7:12am
Fog lights are located below the front and rear bumpers of the car, close to the ground. They are used as light signals in rainy or foggy weather. Their main feature is strong penetration in fog, making it easier for vehicles or pedestrians to notice them early in low visibility conditions, effectively preventing accidents. The methods to deal with water in fog lights are: 1. If the fog light is slightly filled with water, you can turn on the light for a while, using the heat generated when it is turned on to allow the moisture inside to escape through the vent pipe; 2. In case of severe water ingress, it is necessary to promptly remove the lamp cover, then drain and dry it.
Was this review help?
2
0
Share
More Forum Discussions

What is the difference between merging and lane reduction?

Merging and lane reduction have the following differences: 1. Different types of signs: Merging signs: The sign type for merging belongs to guide signs. Lane reduction signs: The sign type for lane reduction belongs to regulatory signs. 2. Different sign styles: Merging signs: Merging signs have a green background with white patterns. Lane reduction signs: Lane reduction signs have a blue background with white patterns. 3. Different settings: Merging signs: Merging signs are set where auxiliary roads merge into main roads. The left one indicates attention to vehicles merging from the left, and the right one indicates attention to vehicles merging from the right. Lane reduction signs: Lane reduction signs are set at locations where lanes are reduced, used to alert drivers that the number of lanes ahead will decrease.
4
5
Share

Is a Heat Insulation Mat Necessary for a Car's Engine Hood?

It is necessary to have a heat insulation mat for a car's engine hood. Below is a detailed introduction to the functions of a heat insulation mat for a car's engine hood: 1. Temperature insulation to protect the paint on the engine hood. The temperature inside the engine compartment is extremely high, and prolonged exposure to high temperatures can accelerate the aging of the paint on the engine hood. Over time, the paint on the engine hood surface will lose its luster. The heat insulation mat can block the temperature, to some extent protecting the paint on the engine hood surface from aging. 2. In winter, the heat insulation mat can prevent the temperature inside the engine compartment from dissipating too quickly. The engine operates optimally within a suitable temperature range, which is beneficial for its performance. Both excessively high and low temperatures can cause certain damage to the engine. Additionally, it can help to some extent in reducing engine noise.
11
2
Share

What type of engine oil is suitable for the Volkswagen Tiguan L?

The Tiguan L can use 5W-40 engine oil. Here is some relevant information: 1. Function: The main functions of engine oil are lubrication, cleaning, and heat dissipation. In terms of types, it can be roughly divided into three categories: conventional, semi-synthetic, and full-synthetic. When changing engine oil, any oil without the word "synthetic" is considered "conventional." 2. Oil degradation: Engine oil degrades over time. "Conventional" oil generally starts to oxidize after about 3 months of exposure to air, reducing its effectiveness. This means that if you don't drive for 3 months after changing the oil, you should change it again. Synthetic oil degrades in about 6 to 9 months. For driving conditions in China, engine oil typically starts to degrade after about 5,000 kilometers.
14
2
Share

Is Wuben Motorcycle the Same as Wuyang-Honda?

Wuben Motorcycle is not the same as Wuyang-Honda. These are two different brands. Honda has two joint-venture motorcycle manufacturers in China, namely Wuyang-Honda and Sundiro-Honda. Additionally, these manufacturers have their own brands, Wuyang and Sundiro. Below are the differences between Wuben and Wuyang-Honda: 1. Brand: Wuyang-Honda is a joint-venture brand and one of the highest-quality and most reputable motorcycle brands in China, while Wuben is a miscellaneous brand with poor quality and after-sales service. There is no comparison between the two, and the difference in quality is significant. 2. Quality: Wuyang-Honda motorcycles are superior in both quality and comfort compared to Wuben motorcycles.
4
1
Share

Will Using Household Dish Soap Damage Car Paint When Washing a Car?

If neutral dish soap is used for car washing, it generally won't cause problems, and polishing can also be employed to protect the paint surface. Below are the specific details about polishing: 1. Introduction: Polishing refers to a processing method that utilizes mechanical, chemical, or electrochemical actions to reduce the surface roughness of a workpiece, thereby achieving a bright and smooth surface. It involves the use of polishing tools, abrasive particles, or other polishing media to refine the workpiece surface. 2. Advantages: When there are no visible primer or paint damages on the car's surface, polishing can remove impurities from the paint and restore the vehicle's original luster. 3. Disadvantages: There is a limit to the number of times a car can be polished. From the time it leaves the factory until it is scrapped, a car should not be polished more than three times. Each polishing session makes the paint thinner, and excessive polishing may cause permanent damage to the paint.
12
4
Share

Which Year's Vehicles Belong to China III Emission Standard?

Vehicles produced between 2007 and 2010 are all China III emission standard compliant. Below is relevant information about China III standard: Implementation time of China III standard: The China III emission standard for vehicles was implemented on July 1, 2008. According to national regulations, all motor vehicles nationwide were required to comply with China III emission testing standards starting from July 1, 2008. The upgrade of emission standards benefits environmental protection efforts. Methods to check China III standard: 1. Check the vehicle's environmental protection label - the standard is clearly marked on the back of the label. 2. Query on the Motor Vehicle Exhaust Pollution Supervision and Management Center website. 3. Bring the vehicle registration certificate (original or copy) to the vehicle management office for inquiry. 4. For new vehicles, check the vehicle's factory certificate of conformity (usually kept at the vehicle management office). It's recommended to make a copy when purchasing a vehicle for backup.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.