···
Log in / Register

How to Deal with Water and Fog in the Reversing Camera?

3 Answers
Phillips
07/30/25 1:45am
First, use a dry cloth to clean the lens surface of the camera, and then use a hair dryer to blow air at the camera for a few minutes. If the water ingress is due to poor sealing of the camera, remove the camera to dry it, and then use sealant for reinforcement. If moisture has penetrated into the components of the camera and the hair dryer doesn't work, it's necessary to go to a repair shop for replacement.
Was this review help?
3
0
Share
McSabrina
08/15/25 7:35am
I've driven several cars, and the common issue of fogging or water ingress in the reverse camera is mostly due to aging seals or improper installation. If this happens, first gently wipe the lens with a dry cloth, then park the car outside on a sunny day for a few hours to let the sunlight evaporate the moisture. If that doesn’t work, try removing the camera yourself and use a hairdryer on the cool setting to dry the internal components—be careful not to hold it too close to avoid damaging the parts. Afterward, check the sealing ring; if it’s cracked or hardened, buy a new one at an auto parts store and replace it. Don’t overlook safety—fogging can affect nighttime reversing visibility and increase the risk of collisions. Regular maintenance of the camera is essential, like drying water stains after washing the car to prevent water ingress. The repair cost is low, and doing it yourself is convenient.
Was this review help?
12
0
Share
Expand All
AlessandraRose
10/21/25 2:16am
I've dealt with foggy cameras several times myself, starting with simple methods. Park and turn off the engine, then gently wipe the lens surface with a soft cloth to avoid scratches, and leave it in a cool, ventilated place for half a day to let the moisture evaporate. If that doesn't work, disassemble the camera cover to absorb the moisture with tissue paper or wrap it in a bag of rice overnight. Then check if the sealing ring is deformed; you can buy a new one online and replace it yourself—it takes time but saves money and is safe. Don't delay if the reversing camera is unclear, as it poses a big risk. For prevention, clean the lens promptly after washing the car and take extra care during the rainy season.
Was this review help?
9
0
Share
Expand All
More Forum Discussions

What Causes a Heavy Clutch?

Car clutch heavy reasons are as follows: Insufficient air pressure: Insufficient air pressure or leakage in the pipeline system. Piston seal wear: Piston seal wear or exhaust valve seal not tight. Clutch booster cylinder damage: The car clutch is located in the flywheel housing between the engine and the transmission, and the clutch assembly is fixed to the rear plane of the flywheel with screws. The output shaft of the clutch is the input shaft of the transmission. Solutions for a heavy car clutch: Remove the clutch: Remove the clutch mechanism for cleaning and maintenance. Replace the clutch master cylinder: Replace the clutch master cylinder, slave cylinder, and hydraulic fluid.
14
0
Share

Can the expiration of Subject 4 be extended?

Yes, it can be extended. From the date of application, there is a three-year period to complete the driver's license examination. How to calculate the three-year validity period of the driver's license examination: Regarding the three-year validity period, as is commonly known, it means that all subjects from Subject 1 to Subject 4 must be completed within three years; otherwise, you will need to reapply and start over from Subject 1. When the validity period actually starts: The three-year validity period officially begins when the applicant passes Subject 1 and receives the "Driving Skills Test Admission Certificate." This document clearly states the start and end dates of the three-year validity period.
10
4
Share

What is the S gear for?

The S gear in a car represents the sport mode of the vehicle. Sport Mode: In fact, S is the abbreviation for sport. In sport mode, the car's performance in various aspects will be enhanced, and the acceleration performance will be stronger. Sport mode is often used for overtaking or climbing hills. After engaging sport mode, the car's gear will drop quickly, with a certain delay in shifting, and the engine can maintain high RPM for an extended period. The car will operate at low gear and high RPM for a longer time, allowing it to generate greater torque and instantly boost the car's speed. Sport mode can be switched freely, and you don't need to press the brake to switch to sport mode while driving. Disadvantages of Sport Mode: It will increase the car's fuel consumption, and rapid acceleration may reduce the comfort level of the vehicle.
19
0
Share

What does M/S mean?

In automobiles, M/S refers to the manual mode and sport mode gear positions in automatic transmission models. Currently, car brands that feature both M/S modes simultaneously include BMW's gear lever (commonly known as the "chicken stick") and some Japanese Toyota off-road models. Below are introductions to manual mode and sport mode: Manual Mode: Manual mode, indicated by "+/-", allows shifting into manual mode when placed in this position, enabling manual gear changes using the +/- function. Sport Mode: Sport mode automatically adjusts engine speed and corresponding shift timing, delaying upshifts or advancing downshifts to maintain higher engine speeds. This provides a more noticeable acceleration feel but inevitably results in higher fuel consumption.
9
1
Share

Is it okay to keep the air conditioning on while parked in the car?

There is no problem with keeping the air conditioning on while parked in the car. Parking the vehicle with the air conditioning running can enhance passenger comfort inside, especially during hot summer months. When using the air conditioning, it is necessary to utilize the external circulation system. Turning on the air conditioning system: First, start the vehicle, then press the AC switch. At this point, the air conditioning system will operate. Adjust the temperature via the air conditioning control panel, regulate the airflow through the gear settings, and adjust the vent angles to use it normally. Automatic air conditioning: For vehicles equipped with automatic air conditioning, simply press the AC switch, and the system will adjust automatically.
15
4
Share

What are the differences between automatic and manual transmissions?

Automatic and manual transmissions differ in terms of operation difficulty and safety performance. Below are detailed explanations of these differences: Operation difficulty: Automatic transmission vehicles primarily rely on the hydraulic torque converter's hydraulic transmission and automatic shifting principle to perform gear changes. Even beginners with limited automotive knowledge can quickly master it, with lower labor intensity and a more relaxed driving experience. Manual transmissions mainly depend on the driver's physical operation of the clutch pedal to shift gears, making the operation relatively cumbersome. It requires drivers to possess higher driving skills, resulting in greater labor intensity. Safety performance: Coasting in neutral with a manual transmission may lead to risks such as understeer or drifting. Additionally, if the engine stalls during idle, the vehicle will lose power steering and brake boost, increasing safety hazards during driving. Automatic transmission vehicles cannot coast in neutral, as they maintain continuous power support throughout the entire journey, making driving safer.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.