How to Deal with Water Accumulation Inside the Car?

1 Answers
AaronFitz
07/29/25 5:25am
Here are the situations and solutions for water accumulation inside the car: 1. Water accumulation in the doors: Due to deformation of the window glass sealing strips, water may enter the doors. It is necessary to promptly check whether the sealing strips are damaged. 2. Water accumulation in the trunk: Poor sealing of the trunk sealing strips and rear tail light seals can lead to water accumulation inside the car. If water is found entering the trunk, the sealing strips should be replaced immediately, and the sealing of the lights should be checked. 3. Water accumulation under the driver's feet: The car chassis is equipped with drainage holes. If the rubber rings of the drainage holes are damaged or fallen off, water from the road may splash into the car. It is necessary to promptly check whether the area under the floor mat is damp. If water accumulation is found, the sponge under the floor mat should be removed and dried to prevent rainwater from soaking the car chassis.
Was this review help?
3
1
Share
More Forum Discussions

Is a U-turn allowed when left turns are prohibited?

In the absence of a no U-turn sign, a U-turn is permitted. Below are specific scenarios: First scenario: First, check nearby traffic signs for any no U-turn or no left turn signs. If there are no prohibitive signs, you can safely make a U-turn. However, when approaching an intersection, if you see a dashed central divider, you can perform the U-turn in the dashed area. If there isn't one, you need to drive past the stop line before making the U-turn, but this is only permissible when the traffic light is green. Second scenario: If you notice a solid dividing line on the road, it means U-turns are not allowed. If a driver needs to make a U-turn, they must proceed beyond the crosswalk. Additionally, at an intersection, a U-turn is not permitted when the light is red. In certain special road sections, such as pedestrian crossings, railway crossings, sharp curves, etc., U-turns are also prohibited.
17
5
Share

What is the total weight of the Boyue?

The total weight of the Boyue is 1575 kg. The Boyue is a compact 5-door, 5-seat SUV with the following body dimensions: length 4519 mm, width 1831 mm, height 1694 mm, and a wheelbase of 2670 mm. It has a fuel tank capacity of 58 liters and features front-wheel drive. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a multi-link independent suspension. The Boyue is equipped with a 1.8T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 120 kW at 5500 rpm and a maximum torque of 250 Nm between 1500 and 4500 rpm.
5
1
Share

What is the sync in the car?

Sync in the car refers to the synchronization button of the dual-zone automatic air conditioning. The following are the related introductions about sync: Principle: By adjusting the mixing doors on both sides to different positions or controlling the left and right hot water tanks to achieve the target temperature. Pressing the sync button ensures that the air outlet temperatures on both sides of the car are the same and adjusted synchronously; when the air conditioning is turned on, setting different temperatures on both sides will automatically turn off the sync function. Features: Vehicles equipped with dual-zone automatic air conditioning can meet the different temperature requirements of passengers in two different positions inside the car. The independent temperature zones allow for flexible adjustment and switching between different temperature differences.
10
5
Share

What to Do When the Cigarette Lighter Won't Pop Out?

The solutions for a cigarette lighter that won't pop out: 1. The fuse may be faulty and needs to be replaced with a new one; 2. The cigarette lighter requires heating for about 10 seconds. If it hasn't finished heating, it won't pop out; 3. The spring mechanism may be causing the issue, preventing the lighter from popping out. In this case, you can try manually pulling it out and then replacing the spring mechanism. A car cigarette lighter is an electronic device similar to a multi-socket power outlet for household use. It connects to the car's power supply via a plug and provides multiple cigarette lighter sockets. The lighter is designed for the convenience of drivers who smoke. However, it is recommended that drivers avoid smoking while driving to prevent interference with normal operation.
14
0
Share

Where is the gear oil filler port on the Tiggo 3?

The gear oil filler port on the Tiggo 3 is located on the left side of the transmission housing. Below is an introduction to the gear oil for the Tiggo 3: 1. Gear oil primarily refers to the lubricating oil used in transmissions and rear axles. It is applied in automotive steering gears, transmissions, and drive axles, among other gear transmission mechanisms. Due to the high surface pressure during gear transmission, gear oil plays a crucial role in lubrication, anti-wear, cooling, heat dissipation, anti-corrosion, rust prevention, cleaning, and reducing gear surface impact and noise. 2. Gear oil should possess excellent anti-wear and load-bearing properties, along with suitable viscosity. Additionally, it should have good thermal oxidation stability, anti-foaming properties, water separation capabilities, and rust prevention. Since gear loads typically exceed 490 MPa, with hypoid gear surface loads reaching up to 2942 MPa, gear oil accounts for about 6% to 8% of the total lubricant volume. Gear oil is a high-performance lubricant. 3. Gear oil is primarily composed of petroleum-based lubricating oil or synthetic lubricating oil, blended with extreme pressure anti-wear agents and oiliness agents. It is an essential lubricant used in various gear transmission devices to prevent gear surface wear, scuffing, sintering, and other issues, thereby extending service life and improving power transmission efficiency.
3
3
Share

What is the equivalent displacement of a 1.8T engine?

1.8T displacement in cars is equivalent to a naturally aspirated 2.4L engine. Below is relevant information about car displacement: 1. Definition: Displacement - A specialized term in hydraulic transmission, referring to the volume of fluid inhaled or exhausted per stroke or cycle. 2. Displacement classification: In China, vehicle classification is determined by engine displacement. Mini cars have displacement ≤1.0L; compact cars range between 1.0-1.6L; midsize cars range between 1.6-2.5L; executive cars range between 2.5-4.0L; luxury cars have displacement >4.0L.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.