How to Deal with Tire Noise?

1 Answers
LoganLee
07/30/25 2:05am
Tire noise treatment methods: You can perform car soundproofing to reduce tire noise by blocking its transmission to the cabin, or you can opt to replace the tires with comfort-type ones to lower the noise. The main factors related to noise and tires are the tread patterns, so comfort-type tires are designed with noise reduction in mind. For car soundproofing, besides removing the front and rear seats and interior trim, you also need to remove the tires and fender liners, then apply soundproofing materials to the four doors, door edges, areas above the wheel arches, the four fenders, and the chassis. Road noise and tire noise are caused by the friction between the tires and the road surface, which generates vibrations and noise. Additionally, there is a significant difference in tire noise between asphalt and concrete road surfaces.
Was this review help?
4
0
Share
More Forum Discussions

How many colors does the Changan CS95 have?

Changan CS95 comes in 4 colors: Noble Black, Andes Gray, Earth Brown, and Elf White. Below is a detailed introduction about the Changan CS95: 1. In terms of power, the Changan CS95 is equipped with a 2.0-liter inline 4-cylinder turbocharged engine across all models, paired with a 6-speed automatic transmission, delivering a maximum power of 171kw and a maximum torque of 360nm, with all models featuring direct fuel injection. 2. The Changan CS95 is positioned as a mid-to-large SUV, featuring a new rugged integrated design, equipped with the Blue Whale 2.0T direct injection engine, matched with an Aisin 6AT transmission, and all models adopt a 7-seat layout. 3. In terms of intelligent safety, the Changan CS95 leads its class, equipped with 7 major intelligent safety systems, ACC adaptive cruise control system, and Bosch's latest PAB pre-collision warning and braking system.
19
1
Share

Where is the crankshaft position sensor located on the Teana?

The crankshaft position sensor on the Teana is installed at the connection point between the engine and the transmission, mounted on the transmission housing. The principle of the crankshaft position sensor is to provide signals for ignition timing, ignition advance angle, and to confirm the crankshaft position, which are used to detect the piston top dead center, crankshaft angle, and engine speed. The function of the crankshaft position sensor is to determine the position of the crankshaft, i.e., the crankshaft angle and engine speed. The measurement method for the crankshaft position sensor is as follows: 1. Check the normal gap between the crankshaft position sensor and the pulse wheel target wheel, which should be greater than 0.5mm and less than 1.2mm. If the pulse wheel is installed incorrectly, being too large or too small, it may cause signal deviation; 2. Turn off the ignition switch, disconnect the crankshaft position sensor connector, and measure the resistance between terminal 1 and terminal 2 of the sensor, which should be between 400-600Ω. If the value is not within this range, it can be determined that the crankshaft position sensor itself is faulty and should be replaced. The two signal lines of the crankshaft position sensor should be insulated from the shielding wire; 3. Turn on the ignition switch and measure the voltage of the two signal lines to ground, which should be 1.4V. This is the preset voltage on the signal lines by the engine control unit. When starting the engine, the signal voltage of the crankshaft position sensor should be close to 1.6V. If there is an open or short circuit inside the sensor, signal lines, or engine control unit, the computer will be unable to receive the crankshaft position signal, resulting in the engine failing to start.
9
1
Share

What are the differences between the Mercedes-Benz A200 and C200?

The differences between the Mercedes-Benz A200 and C200: 1. Different vehicle types: The Mercedes-Benz A200 is a compact car; the C200 is a mid-size car. 2. Different body dimensions: The Mercedes-Benz A200 has a length, width, and height of 4622mm, 1796mm, and 1454mm respectively; the C200 measures 4784mm, 1810mm, and 1457mm. 3. Different wheelbases: The Mercedes-Benz A200 has a wheelbase of 2789mm; the C200 has a wheelbase of 2920mm. Additionally, in terms of transmission, the Mercedes-Benz A200 uses a 7-speed wet dual-clutch transmission; the C200 uses a 9-speed automatic transmission. From the perspective of suspension type, the Mercedes-Benz A200 features a front MacPherson strut independent suspension; the C200 has a front multi-link independent suspension.
2
0
Share

What is the working principle of power steering?

Working principle of power steering: When the car is steering, the torque sensor detects the torque and rotation direction of the steering wheel, and sends the signal to the electronic control unit. The electronic control unit comprehensively analyzes the data such as the torque of the steering wheel, the rotation direction and the vehicle speed, and sends signal instructions to the motor controller, so that the motor outputs the corresponding size and direction of torque to generate power assistance. The power steering system of the car is roughly divided into two categories: hydraulic and electric. The power assistance principle of the electronic hydraulic power steering system is the same as that of the traditional mechanical hydraulic power steering system, but an electric steering pump is added. The start and stop of the electronic pump are controlled by the ECU. When no steering action is performed, the electric steering pump is turned off, unlike the mechanical hydraulic power steering pump, which is always linked to the engine through a belt.
20
1
Share

What car brand has a letter A on its logo?

The car with a letter A on its logo is the Honda Acura, a premium sub-brand under the Japanese automaker Honda. Here are some relevant details: 1. Acura's logo features a caliper symbolizing engineering precision, resembling a capital letter A, representing accuracy, reliability, and masterful craftsmanship. The name Acura (derived from 'Accuracy') reflects its founding philosophy of 'Precision Crafted Performance.' 2. Acura continuously elevates performance standards across its luxury lineup, spanning high-performance sports cars, sedans, the MDX sport utility vehicle, and the exotic NSX supercar. For instance, its flagship premium SUV, the Acura MDX, is powered by the brand's largest-ever 3.7L VTEC engine and equipped with Acura's core technology – the Super Handling All-Wheel Drive (SH-AWD) system.
18
3
Share

What is the difference between 5W and 10W motor oil?

The main functions of motor oil are to reduce friction and wear between moving parts, and to remove sludge (one of the functions of dispersants) and varnish (cleaners) from the engine. The differences between 5W and 10W motor oil are as follows: 1. Different low-temperature performance: 5W has better low-temperature performance than 10W. If you are in a colder northern region, choose 5W or 0W. In southern regions, either 10W or 5W is suitable. 2. Different prices: 10W grade motor oil is generally cheaper than 5W. 3. Different low-temperature fluidity: The 'W' stands for winter, and the smaller the number before it, the better the low-temperature fluidity (oil thinning) of the motor oil. Therefore, 5W has better low-temperature fluidity than 10W. 4. Different protection capabilities for the engine during cold starts: 5W indicates that the motor oil can operate at a minimum temperature of -30 degrees Celsius, while 10W indicates a minimum operating temperature of -25 degrees Celsius.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.