How to Deal with the Rattling Noise in the Bora's Center Console?

1 Answers
VanMatteo
07/30/25 5:22am
Bora's center console rattling noise might be caused by deviations in plastic molds or installation shifts, resulting in mutual friction and squeezing sounds due to bumps. Locate the source of the noise, identify the friction point, and place a rubber-like material to block it, which provides good cushioning. Below are some solutions related to center console rattling noises: 1. First, drive slowly and listen carefully to determine the location of the noise, checking if any foreign objects were inadvertently placed, such as small iron wires in the toolbox, debris in the center console gaps, or surrounding clutter. If the noise persists after cleaning, it is likely that some components of the center console have loosened due to frequent use. 2. If the audio system was modified, ensure all screws are tightened, and use silicone to fill any gaps between panels.
Was this review help?
14
0
Share
More Forum Discussions

How long will a motorcycle driver's license be revoked if it is not reviewed annually?

Motorcycle driver's licenses will be automatically revoked after three inspection cycles without annual review. Does a motorcycle driver's license require annual inspection: Motorcycle driver's licenses do not require annual review; they only need to be renewed upon expiration. For motorcycles under 4 years old, inspection is required every 2 years; for those over 4 years old, inspection is required annually. Handling an expired driver's license: If a motor vehicle driver's license is revoked but not more than two years, the driver can regain driving eligibility by passing the road traffic safety laws, regulations, and related knowledge exam. Additionally, if the driver's license is within its validity period or has expired for less than one year, the driver can also regain eligibility by submitting a physical condition certificate.
6
5
Share

What are the consequences of continuing to drive after a vehicle overheats?

Continuing to drive after a vehicle overheats can lead to the following consequences: Decrease in engine's air charge coefficient: Higher temperatures result in lower air density, reducing the actual air intake of the engine. Reduction in engine's air charging capability: Due to engine overheating, the temperature under the hood increases, diminishing the engine's air charging capability. Abnormal engine combustion: This can cause abnormal engine combustion, increasing the likelihood of knocking and reducing engine power. Degradation of engine components: Overheating leads to thermal degradation of engine component materials and can also affect the clearances between various engine parts.
11
4
Share

How to reset the tire pressure monitoring system on the Baojun 730?

Baojun 730 tire pressure monitoring system reset method is: 1. Press the square icon button on the left side of the steering wheel; 2. Switch to the tire pressure monitoring screen; 3. Hold down the triangle icon button to clear and reset. Taking the 2019 Baojun 730 as an example, its body dimensions are: length 4780mm, width 1780mm, height 1740mm, wheelbase 2750mm, and fuel tank capacity 52l. The 2019 Baojun 730 is equipped with a 1.5t turbocharged engine, with a maximum horsepower of 147ps, maximum power of 108kw, maximum torque of 250nm, and is paired with a 6-speed manual transmission.
17
5
Share

Does Zippo use cotton pads or rubber pads?

Zippo uses cotton pads. Zippo uses degreased cotton inside: Tear the cotton apart and remove visible impurities such as small stones and dead leaves. Wash the cotton with water until the outflow is clear. Place the cotton in an enamel pot, add water until it is just submerged, then add NaOH equivalent to 2% to 5% of the water weight. Cover and boil, then simmer for 10 minutes. Cool, rinse with plenty of water, scrubbing for about 10 minutes. Dry the washed cotton on clean paper. The function of Zippo cotton pads: Zippo cotton pads prevent oil leakage, but if too much oil is added beyond the cotton's absorption capacity, it will still seep out! Additionally, the English text on the cotton pad roughly indicates the oil filling area, and the small holes on the pad can also hold spare flints. First, choose genuine Zippo lighter fluid and keep away from fire sources. Before refueling, place waste newspaper or similar padding under the lighter to prevent oil from dripping onto the table. The appropriate amount of oil to add doesn't have an exact standard. Based on experience, add oil until the cotton appears moist, which is about 70% of the cotton's oil absorption capacity. If the lighter, which usually works well, starts having ignition issues, the first thing to consider is whether it needs refueling. However, sometimes to extend the time between refueling, people add more oil, which only leads to waste. When refueling, due to gravity, the oil settles at the top of the lighter (when the lighter is inverted, i.e., the windproof cap area). If the cotton appears moist with oil, it means too much has been added. Cotton has a saturation point for oil absorption. If the body is reassembled into the case, excess oil will leak from the bottom. Therefore, it's recommended to refuel frequently but in small amounts. After refueling, check the case and padding for any oil leakage and wipe it dry before testing the lighter.
20
0
Share

How to Turn on the Air Conditioning in the Buick Envision?

To turn on the air conditioning in the Buick Envision, simply press the AC button on the center console. Taking the 2021 Buick Envision 1.5T as an example, it belongs to the midsize SUV category with body dimensions of 4694mm in length, 1839mm in width, and 1686mm in height, featuring a wheelbase of 2750mm. It has a fuel tank capacity of 66 liters and a curb weight of 1610kg. The 2021 Buick Envision 1.5T is equipped with a MacPherson strut front suspension and a multi-link rear suspension. It is powered by a 1.5L turbocharged engine delivering a maximum horsepower of 169PS, a peak power of 124kW, and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
1
3
Share

What to Do If You Fill Your Car with the Wrong Fuel?

The solutions for filling your car with the wrong fuel are: 1. If you fill high-octane fuel with low-octane fuel, short-term use will not damage the engine; 2. If you fill gasoline with diesel, the owner should contact a repair shop as soon as possible to clean the fuel tank and fuel system, conduct a comprehensive inspection of the engine, and avoid ignition to prevent damage to the car; 3. If you fill diesel with gasoline, replace the fuel immediately. Precautions for refueling your car include: 1. Refuel in the morning or evening to avoid direct sunlight at noon; 2. Add more fresh fuel before long-distance trips; 3. Do not exceed the fuel tank's upper limit; 4. Avoid using electronic devices; 5. No smoking; 6. Park, turn off the engine, and shut off the power.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.