How to Deal with the Noise from the 5 Series Sunroof?

2 Answers
Jim
07/24/25 6:06pm
You can use a towel to remove dust from the sunroof gap, and regular maintenance is very important. Here is some relevant information about the BMW 5 Series sunroof: 1. Introduction: The BMW 5 Series panoramic sunroof is divided into a dual-panel panoramic sunroof and a spliced panoramic sunroof. Dual-panel panoramic sunroof: On the top of the front seats, there is still a standard sunroof like an ordinary one, and then on the top of the rear seats, the designer adds another non-opening sunroof, which can bring more light into the car, achieving an effect similar to a panoramic sunroof. Spliced panoramic sunroof: It consists of two sunroofs, front and rear, but the two sunroofs overlap slightly, resembling a single unit. The sunroof area is large, so this type of sunroof can also be classified as an integrated openable panoramic sunroof. 2. Maintenance Suggestions: The sunroof sealing strip is exposed to rain or sunlight for a long time and is prone to aging. Rubber conditioner can temporarily restore the performance of the sealing strip. That is, open the sunroof fully and spray the conditioner on the sealing strip.
Was this review help?
19
0
Share
Figueiredo
08/11/25 10:01am
My own BMW 5 Series also had a sunroof rattling issue before, and the creaking noise while driving was quite annoying. I first tried cleaning the tracks myself, but the improvement was minimal. Later, I found out it was caused by dirty tracks and insufficient lubrication – after spraying some dedicated lubricant, the noise disappeared completely. My suggestion is to first check if there are any dust or debris on the tracks. Clean them thoroughly and apply lubricant spray. If the noise persists, it might be due to loose sliding rails or aged sealing strips, in which case professional repair is needed – don’t force a DIY fix to avoid damaging components. Develop a habit of checking the sunroof before driving; this can reduce unexpected issues and prevent distractions that affect safety. Additionally, clean the tracks more frequently in dusty environments, such as wiping them with a damp cloth weekly, to extend their lifespan. The key is to address problems early before minor issues escalate.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

Is Fuel Oil the Same as Gasoline?

Fuel oil refers to combustible oil, while gasoline is specifically for gasoline engines and is a type of fuel oil. Below is an introduction to fuel oil: Fuel oil: Fuel oil is used in fuel engines and is mainly divided into two types: gasoline and diesel. Gasoline: Gasoline is classified based on its octane rating, such as 90#, 97#, etc. The higher the octane rating, the lower the chance of engine knocking, which is better for the engine. Therefore, most high-end cars use gasoline with higher octane ratings. Diesel: Diesel is classified based on its freezing point. 0# means it will solidify when the temperature drops below 0 degrees Celsius. Similarly, 10# means it solidifies at -10 degrees Celsius, which is why diesel vehicles in northern regions use lower-grade diesel in winter to prevent the fuel from freezing.
1
3
Share

What is the difference between three-point and five-point construction safety belts?

The following is an introduction to the differences between three-point and five-point construction safety belts: Different suitable ages: Five-point safety belts are suitable for children under 3 years old. Three-point safety belts are suitable for children over 3 years old. Different choices: The number of points refers to the number of connection points between the safety belt and the seat. The more points there are, the easier it is to secure a person, but five-point belts are too complex to use, so they are generally used for child safety seats, racing cars, or modifications, while ordinary family cars use three-point belts. Different usage methods: First, five-point belts protect more areas, and F1 racers use five-point safety belts. Second, the main energy absorption points of three-point belts are at the neck and crotch. Crotch pressure is harmful not only to boys but also to girls, so it is best to use five-point safety belts.
1
3
Share

What Industry Category Does Auto Repair Belong To?

Auto repair belongs to the service industry. Auto repair is a general term for automobile maintenance and repair, simply put, it is the service work of providing after-sales maintenance for automobiles. Auto repair involves using technical means to diagnose faulty automobiles, identify the causes of faults, and take certain measures to eliminate the faults and restore the vehicle to a certain level of performance and safety standards. Below is a relevant introduction: Auto repair is a technical job: Auto repair is a technical job, belonging to the technical service industry, helping people solve vehicle fault problems. The repair activities of auto repair shops fall under automobile repair. Auto maintenance and repair activities not conducted by auto repair shops belong to automobile and motorcycle maintenance, all of which are part of the service industry. Classification of auto repair: Auto repair shops are specialized units for repairing automobiles and assemblies, usually located within automobile stations, and there are also independent enterprises. The basic methods of auto repair are divided into two types, meaning auto repair shops are specialized units for repairing automobiles and assemblies, generally set up inside automobile stations, with some being independent enterprises. The basic methods of auto repair can be divided into old car repair and assembly exchange repair.
8
4
Share

What type of battery does the BYD e2 use?

The BYD e2 uses Blade Battery, which is a lithium iron phosphate (LFP) Blade Battery. Through structural innovation, the Blade Battery can skip the module during assembly, significantly improving volume utilization and ultimately achieving the design goal of accommodating more battery cells in the same space. Compared to traditional battery packs, the Blade Battery increases volume utilization by over 50%, meaning the driving range can be extended by more than 50%, reaching the same level as high-energy-density ternary lithium batteries. When driving, avoid sudden acceleration, as slamming the accelerator pedal can instantly generate a high current, causing the battery to discharge rapidly and significantly shortening its lifespan. For daily charging, prioritize slow charging over fast charging. Whether fast or slow charging, the principle involves the migration of lithium ions from the positive electrode to the negative electrode under the influence of external electrical energy. However, due to the different migration speeds of lithium ions, frequent fast charging can accelerate battery polarization and reduce battery lifespan. Fast charging in low temperatures may cause lithium dendrites to form on the surface of lithium ions, potentially piercing the separator and particularly affecting battery longevity. Electric vehicles require regular battery inspections, and the battery should not be left in a depleted state for extended periods. If the vehicle is unused for a long time, slow discharge may occur. It is recommended to store the battery fully charged and check its charge level monthly, replenishing it as needed. During regular use, avoid waiting until the car battery is completely depleted before recharging.
11
4
Share

What does p177c clutch 2 reaching tolerance limit mean?

p177c clutch 2 reaching tolerance limit means that when the clutch establishes working pressure, the piston exceeds its movement limit due to excessive travel, indicating clutch wear. Below is relevant information about clutches: Introduction to Clutches: The clutch is located in the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. During vehicle operation, the driver can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine and transmission, thereby cutting off or transmitting the power from the engine to the transmission. Types of Clutches: Electromagnetic clutch, magnetic particle clutch, friction clutch, hydraulic clutch.
8
1
Share

Which is better, DCT or AT?

Choosing an AT transmission is better because AT transmissions offer excellent smoothness and durability. Below is relevant information about transmissions: Introduction to transmissions: A device that changes speed ratios and direction of motion. Used in automobiles, tractors, ships, machine tools, and various machinery to alter the torque, speed, and direction of motion transmitted from the drive shaft to the driven shaft under different working conditions. Gear-driven transmissions generally consist of a housing and several gear pairs. Function of transmissions: While driving, to adapt to different working conditions, a vehicle's driving force and speed need to vary within a certain range. However, the existing engine's torque and speed variation range cannot meet this requirement, hence the installation of a transmission.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.