How to Deal with the JMC DPF Warning Light?

1 Answers
VanNolan
07/29/25 9:34pm
JMC DPF warning light solutions are as follows: 1. Automatic Regeneration: When the DPF indicator is green, no manual intervention is needed. This usually occurs when the vehicle is driven at high speeds. Continue driving normally until the particulate matter is processed, and the DPF light will turn off automatically. 2. Manual Regeneration: The DPF yellow indicator light will flash, which typically happens when the vehicle is driven at speeds below 80km/h. In this case, promptly pull over away from roads, flammable, and explosive materials. Once the vehicle is stationary, shift to neutral, engage the parking brake, and press the DPF control button. The yellow light will stay on continuously, and the process takes about 15-30 minutes. Once the particulate matter is processed, the light will turn off automatically. 3. On-Demand Regeneration: This can be performed at any time and is suitable for users who mainly drive in urban areas. For example, after parking the car at home, press and hold the DPF button for 3-5 seconds to initiate a check. If the yellow light flashes, it indicates the need for manual regeneration. Press the DPF button again, and the yellow light will stay on. Wait for 15-30 minutes until the light turns off, indicating the particulate matter has been processed.
Was this review help?
18
5
Share
More Forum Discussions

Where is the keyhole inside the Baojun 510?

The keyhole inside the Baojun 510 is located on the right side of the steering wheel, which is a common position. It's important to note that some models feature a push-button start system, and these models do not have a keyhole. For push-button start models, you don't need to insert the key into a keyhole to start the car; simply press the brake pedal and click the push-button start to ignite the engine. The Baojun 510 is a compact SUV under SAIC-GM-Wuling, with dimensions of 4220mm in length, 1740mm in width, and 1615mm in height, and a wheelbase of 2550mm. It features front-wheel drive. In terms of design, the Baojun 510 adopts a distinctive split headlight design, with LED daytime running lights connected to the large front grille. The main headlights are positioned on either side of the grille, while the rear features conventional halogen tail lights.
12
5
Share

Does Rapid Acceleration Damage the Car?

Rapid acceleration can cause certain damage to the car, particularly to the tires and suspension system. Rapid acceleration refers to accelerating the vehicle from a relatively stationary state. This sudden increase in speed can impose a certain degree of impact on the suspension system and the rubber components in the shock absorbers, causing harm to the vehicle. Tires are a critical part of the car, constantly exposed to working conditions. Combined with the driver's habit of rapid acceleration, this can significantly damage the tires by increasing friction. Rapid acceleration is considered a poor driving habit, as it leads to higher fuel consumption and greater wear on the braking system, shortening the lifespan of brake discs and pads, and accelerating the aging of components. Therefore, it is advisable to avoid the bad habit of rapid acceleration.
14
5
Share

What is the method for matching engine speed with gear position?

Methods for matching engine speed with gear position: 1. When accelerating, first shift to a higher gear, the engine speed will increase, and the torque on the gears will become larger; 2. For high-speed cruising, use a higher gear to reduce engine speed; 3. When going downhill, use a lower gear to assist with engine braking and reduce speed; 4. When climbing a steep slope, shift to a lower gear to increase torque on the gears, allowing the vehicle to climb smoothly. Principles of engine operation: 1. Mix air and gasoline in a certain proportion to form a combustible mixture; 2. The intake stroke draws the mixture into the cylinder, where it is compressed, ignited, and burned to generate thermal energy; 3. The high-temperature, high-pressure gas acts on the top of the piston, driving the piston to perform reciprocating linear motion, and mechanical power is output externally through the connecting rod, crankshaft, and flywheel mechanism.
8
5
Share

What are car headlights?

Car headlights, also known as automobile front lights or LED daytime running lights, serve as the eyes of a car. They not only affect the external image of a car owner but are also closely related to safe driving at night or under bad weather conditions. The use and maintenance of car lights cannot be ignored. Types of car headlight sources: 1. Halogen headlights - Tungsten lamps filled with halogen elements such as bromine and iodine or halides are called halogen lamps or halogen tungsten lamps, which are a new generation of incandescent lamps; 2. Xenon headlights - Xenon lamps refer to high-pressure gas discharge lamps filled with inert gas mixtures including xenon, without the filament found in halogen lamps, abbreviated as HID xenon lamps, also known as heavy metal lamps or xenon lamps; 3. LED headlights are lighting devices that use LEDs as light sources.
14
4
Share

How to Turn on the Cold Air in the Southeast DX3 Air Conditioning?

The method to turn on the cold air in the Southeast DX3 air conditioning is: 1. Insert the key and start the power; 2. Press the AC button to turn on the cold air; 3. Rotate the temperature control button to the blue position and adjust the fan speed. Steps to remove the Southeast DX3 air conditioning filter: 1. Open the glove box; 2. Squeeze the inner panel of the glove box; 3. Lower the glove box and remove the air conditioning filter located at the top of the glove box. Taking the 2019 Southeast DX3 as an example, its body dimensions are: 4354mm in length, 1840mm in width, and 1654mm in height, with a wheelbase of 2610mm. It is equipped with a 1.5L inline 4-cylinder naturally aspirated engine, with a maximum power of 88kW, maximum horsepower of 120PS, and maximum torque of 143Nm.
13
2
Share

Where to Go for Vehicle Ownership Transfer?

Vehicle ownership transfer needs to be processed at the local vehicle management office where the vehicle is registered. The vehicle ownership transfer process: 1. Obtain the used vehicle sales contract at the service window and fill it out; 2. Drive the vehicle directly to the inspection area for vehicle inspection, photography, VIN tracing, and license plate removal, then fill out the inspection record form; 3. After all procedures are completed, drive the vehicle back to the parking lot, then proceed to the transfer hall for further processing; 4. Upon returning to the transfer hall, take a number, queue up, and wait for your number to be called. After the staff confirms there are no traffic violations on the vehicle, the transfer process will begin, and the transfer fee will need to be paid; 5. After payment, proceed to the transfer acceptance window for relevant procedures; 6. After completing the transfer acceptance, you can select a new license plate number, then receive the new license plate, vehicle registration certificate, and vehicle license, completing the ownership transfer.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.