How to Deal with the Ford Edge Sunroof Abnormal Noise?

1 Answers
McRafael
07/30/25 8:31am
The solutions for the Ford Edge sunroof abnormal noise are as follows: 1. The sunroof sealing strip, if exposed to rain or sunlight for a long time, can easily age. Rubber conditioner can temporarily restore the performance of the sealing strip. 2. Loose screws may cause roof noise and even pose a risk of the sunroof falling off. Locate the sunroof screws and tighten them. 3. If there are dust particles in the sunroof slide rail, remove them with a towel. Sunroof maintenance suggestions are as follows: 1. During car washing, avoid directing the high-pressure water jet directly at the sealing ring. This not only easily deforms the sealing ring under the pressure of the high-pressure water jet, causing water to enter the car, but also greatly damages the sealing ring. 2. On extremely bumpy roads, it is best not to fully open the sunroof, as the strong vibration between the sunroof and the slide rail may cause deformation of related components or even damage the motor. Additionally, it is strictly forbidden to open the sunroof during rain or car washing. 3. The biggest concern when using a sunroof is leakage. Proper use and maintenance of the sunroof can effectively prevent leaks. Before the rainy season, in addition to cleaning dust from the slide rail and sealing strip gaps, a small amount of plastic protective agent or talcum powder should be sprayed on the sealing strip and other components.
Was this review help?
14
4
Share
More Forum Discussions

Should Engine Protectant Be Added?

Engine protectant does not need to be added. Modern synthetic engine oils already contain excellent anti-wear additives, repair agents, outstanding protection, flow performance, reduced carbon deposits, sludge prevention, and oxidation resistance - covering all the indicators that protectants provide. Today's engine oils are specially formulated with all parameters precisely calibrated to optimal levels for specific engines. Adding protectants would disrupt the balanced formulation of the original oil. Functions of engine protectants: 1. Anti-wear: Prevents dry friction or wear between metal components in the engine; 2. Lubrication: Forms a protective film on metal surfaces, providing better lubrication than engine oil; 3. Improves power output and fuel efficiency.
17
4
Share

How to Open the Sail 3 Key?

Sail 3 key opening method: Use a small screwdriver to pry open the key cover along the edge of the key. After opening the cover, you can then remove the old battery and replace the battery inside. Pay attention to the positive and negative directions when installing the battery. The Sail 3 is a model under the Chevrolet brand of Shanghai General Motors. Its body dimensions are 4300mm in length, 1735mm in width, and 1504mm in height, with a wheelbase of 2500mm. In terms of appearance, the front face of the Sail 3 adopts Chevrolet's design style. The gradually inward-tightening trunk lid and the detailed design in the middle give the rear of the Sail 3 more layers and a more fashionable feel.
9
1
Share

Where is the Fuse for the Navigation System?

Navigation system fuses are located either on the side of the center console near the door or in the fuse box under the steering wheel. You can locate the specific fuse position by referring to the fuse diagram on the fuse box cover. The car navigation system features GPS global satellite positioning functionality, allowing drivers to know their exact location anytime while driving. Key functions of car navigation systems include: support for CMMB digital TV, true-color HD digital display, intelligent digital operation platform, advanced electronic shock resistance, rearview camera support, and FM/AM radio. The car navigation system consists of two components: one part includes the GPS receiver and display device installed in the vehicle, and the other part is the computer control center. These two components communicate via positioning satellites.
20
4
Share

How to Clean Carbon Deposits in the Engine Combustion Chamber?

Methods for cleaning carbon deposits in the engine combustion chamber: 1. Start the vehicle and run it until the cooling system enters the major circulation cycle (i.e., the electric fan runs for three minutes), then turn off the engine; 2. Remove the spark plugs and use a funnel to pour 100ml of cleaning solution into the combustion chamber; 3. Use a bubbling device or air gun to agitate the cleaning solution in the combustion chamber, bubbling for 3 minutes, then immediately extract the waste liquid; 4. Repeat the pouring, bubbling, and extraction process for all combustion chambers to complete the cleaning. Engine carbon deposits are byproducts of fuel and lubricating oil under high temperature and oxidation, primarily composed of hydroxy acids, asphaltenes, tar, etc.
18
4
Share

What Causes the Air Conditioning to Not Cool After Long-Term Inactivity?

Reasons why the air conditioning does not cool after long-term inactivity: 1. Dirty radiator causing poor heat dissipation; 2. Compressor damage; 3. Lack of refrigerant in the air conditioning system; 4. Broken belt causing the compressor not to rotate. Precautions for using car air conditioning: 1. Correct direction of air conditioning vents; 2. Do not keep the air conditioning in internal circulation for too long; 3. Avoid using the air conditioning for extended periods each time. The car air conditioning system is a device that cools, heats, ventilates, and purifies the air inside the vehicle, providing a comfortable environment for passengers, reducing driver fatigue, and playing a crucial role in ensuring safe driving.
6
2
Share

What are the common faults of the throttle position sensor?

Common faults of the throttle position sensor include: short circuit or open circuit of the idle switch; poor contact of the sliding contact of the linear variable resistor; and improper installation or adjustment of the throttle position sensor, causing the idle switch not to close when the throttle is fully closed, or the idle switch to remain closed when the throttle is partially open. The throttle position sensor is also known as the throttle opening sensor or throttle switch. Its main function is to detect whether the engine is in idle condition or under load, whether it is accelerating or decelerating. Essentially, it is a variable resistor and several switches installed on the throttle body.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.