How to deal with the ESP warning light?

1 Answers
DaniellaRose
07/29/25 5:13am
The method to deal with the ESP warning light is to reduce driving speed to avoid excessive steering and turning, and to go to a 4S shop as soon as possible for fault inspection with a specialized diagnostic tool. The reasons for the ESP warning light being on include: 1. ABS pump failure; 2. ABS pump power supply or grounding circuit failure; 3. Loose sensor wiring connections; 4. Failure of a certain sensor; 5. Related fuse blown; 6. System signal transmission blocked; 7. System false alarm. ESP is the Electronic Stability Program, a further extension of the functions of the Anti-lock Braking System (ABS) and Traction Control System (TCS). When the car is braking and the tires lock, the ESP system will use mechanical intermittent braking to allow the driver to control the direction of the car with the steering wheel even when fully braking.
Was this review help?
18
5
Share
More Forum Discussions

Is It Illegal to Convert a Manual Transmission to an Automatic One?

Legally speaking, converting a manual transmission to an automatic one is not illegal, but modifications should be done cautiously as they may affect the annual vehicle inspection. A manual transmission can be converted to a pseudo-automatic transmission: By installing an electronic control system to assist the driver in operating the clutch, but gear shifting still requires manual operation. When shifting gears, the system controls a motor to automatically depress the clutch, releasing it once the gear is engaged, preventing stalling. The system also provides prompts when shifting is needed. Disadvantages of modification: The modified vehicle may fail the annual inspection, and arbitrary modifications can also impact insurance claims. Accidents caused by modified parts may not be covered by insurance.
2
1
Share

What is Gear Clashing?

Gear clashing refers to a situation where the speed synchronization during gear shifting is not optimal, causing the vehicle to fail to proceed at the most suitable speed for the current gear. It is a common malfunction in automatic transmissions. Causes of gear clashing include: 1. Contamination and impurities in the transmission: Many cases of gear clashing, jerking, impact, or slipping in automatic transmissions are not due to internal valve body damage but rather the presence of stubborn dirt and impurities inside. Especially when these contaminants accumulate in the valve body, forming blockages, they hinder effective regulation of oil pressure, leading to jerking, impact, or slipping issues. 2. Transmission overheating: Additionally, the issue of transmission overheating cannot be overlooked. High temperatures degrade the quality and frictional properties of automatic transmission fluid, increasing friction and wear, which leads to transmission noise. At the same time, sludge (impurities or dirt) can form inside the transmission (e.g., in the valve body), causing jerking and impact. If the temperature exceeds 120°C, rubber sealing materials begin to harden, eventually leading to leaks and reduced hydraulic pressure. At even higher temperatures, the transmission starts to slip, and slipping in turn causes the temperature to rise further.
7
5
Share

Can I Replace My Driving License in Another Location with Points Deducted?

Replacing a driving license in another location with points deducted is not allowed; you must first handle the traffic violation and points deduction record. Below is an extended introduction: 1. Legal Provisions: According to the "Road Traffic Safety Law," driving a motor vehicle on the road requires carrying the motor vehicle driving license at all times. Failure to carry it will result in the traffic police impounding the vehicle, notifying the party to complete the formalities, and issuing a warning or a fine ranging from 20 to 200 yuan. Therefore, if there is a record of traffic violations and points deduction, it must be handled immediately, and the license replacement application should be processed promptly. 2. Required Documents for Replacement: To process the driving license replacement in another location, you need to bring the driver's license, the original and a copy of the driver's ID card, three one-inch color photos of the driver, and physical examination proof. Visit the vehicle management office to fill out the motor vehicle driving license application form and submit it along with the other documents to complete the replacement process.
12
3
Share

Is it necessary to use 95-octane gasoline for the Volkswagen Sagitar?

According to the official car manual recommendation, the Volkswagen Sagitar should use 95-octane gasoline. In addition to checking the suitable gasoline grade in the car manual, the Volkswagen Sagitar can also check it on the fuel tank cap, which will also be marked. Usually, the gasoline grade can also be determined based on the engine's compression ratio. Cars with an engine compression ratio between 8.6-9.9 should choose 92-octane gasoline, while those with an engine compression ratio between 10.0-11.5 should choose 95-octane gasoline. However, with the use of some new technologies nowadays, the gasoline grade cannot be determined solely by the compression ratio. A high compression ratio can also be adjusted to use low-octane gasoline. This is because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally speaking, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. If the Volkswagen Sagitar occasionally uses the wrong gasoline grade, simply switch back to the correct gasoline grade after use. However, if the wrong gasoline grade is used for a long time, the following effects may occur: For vehicles recommended to use low-octane gasoline, using high-octane gasoline by mistake will not cause damage, but the increase in octane number will change the fuel's ignition point, leading to delayed combustion in the engine. This means the engine's power output and thermal efficiency will decrease, and the actual feedback experience is reduced power. For vehicles recommended to use high-octane gasoline, using low-octane gasoline will cause engine knocking. Because the octane number is too low, the fuel's ignition point decreases and it may ignite prematurely during the compression stroke. If the fuel ignites before the spark plug fires during the compression stroke, resistance will occur during the upward stroke. This resistance will make the engine run very unstably. If it is only mild knocking, it will just increase noise without obvious damage to the engine. However, if there is noticeable knocking, it indicates that the engine's working condition is already very severe. The vibration not only affects driving stability but also causes abnormal wear on the piston and cylinder, and in severe cases, it can even lead to cylinder scoring.
4
1
Share

Where to Check the National Emission Standard of a Vehicle?

To check the national emission standard of a vehicle, the simplest and most direct method is to look at the vehicle's environmental protection label. You can also inquire through the website of the Motor Vehicle Exhaust Pollution Supervision and Management Center. Below is relevant information about vehicle emission standards: 1. Meaning of vehicle emission standards: Vehicle emission standards refer to regulations on the content of harmful gases such as CO (carbon monoxide), HC+NOx (hydrocarbons and nitrogen oxides), and PM (particulates, soot) emitted from vehicle exhaust. 2. Meaning of National VI: The National VI Motor Vehicle Pollutant Emission Standard is established to implement the "Environmental Protection Law of the People's Republic of China" and the "Air Pollution Prevention and Control Law of the People's Republic of China," aiming to prevent pollution from the exhaust of compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health.
15
4
Share

Why is the antifreeze level decreasing rapidly?

There may be several reasons for the rapid decrease in antifreeze: 1. Poorly designed cooling system: This generally doesn't occur in mature vehicle models, especially new cars. 2. Poor circulation causing fast consumption: Have a professional mechanic inspect it. Note that when adding coolant, do so after the engine has cooled down. During the process, start the engine and gently press the accelerator to expel air from the system. Add coolant slowly to ensure proper filling. If necessary, follow the manual's instructions to bleed the cooling system. 3. Leakage: Usually, visible traces can be found at leakage points. 4. Coolant entering and burning in the cylinders or entering the oil pan: In mild cases, there may be no water in the oil pan, but some operational issues might occur (check by removing spark plugs for comparison). In severe cases, water may be present in the oil pan (emulsified oil), causing engine instability. Don't immediately assume it's a cylinder head gasket issue - a damaged intake manifold gasket can also cause coolant to enter the cylinders, as some engines have water passages in the intake manifold. If water burning is severe, the engine's exhaust pipe will discharge water along with white smoke.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.