···
Log in / Register

How to deal with the electronic parking brake failure of Haval H6?

3 Answers
OMia
07/29/25 6:35pm
Haval H6 electronic parking brake failure solutions: 1. Temporary fault code: You can first try to restart the car to see if the fault code still exists. If the fault code disappears and the vehicle is functioning normally, no further action is needed; 2. Wiring issues or onboard computer problems: If the fault code persists after restarting the vehicle, it indicates wiring issues or problems with the onboard computer. The Haval H6 is a flagship model under the Haval brand, positioned as an urban intelligent SUV. It offers Mitsubishi 2.0L gasoline-powered models and Green Power 2.0T diesel models, with dimensions of 4640mm in length, 1825mm in width, and 1690mm in height, and a wheelbase of 2680mm.
Was this review help?
9
1
Share
LeTalia
08/14/25 11:44am
I've been driving a Haval H6 for a while and encountered an electronic parking brake failure. That time when parked on a slope, the dashboard showed a red warning light and the car couldn't move. I first tried turning off and restarting the engine several times - system reset can temporarily resolve software conflicts. But when the fault persisted, I immediately checked the electronic parking brake fuse in the front fuse box to ensure it wasn't blown. Additionally, low battery charge or aging circuits can also trigger faults, so it's important to regularly check battery life. For safety, never attempt to drive the car in this condition as it could dangerously roll on slopes. I eventually drove to the 4S shop where they diagnosed it as a sensor failure and replaced the component. Sharing this experience - don't delay with similar issues, get professional help early.
Was this review help?
17
1
Share
Expand All
JamesRose
10/14/25 6:57am
Electronic parking brake failure can be quite alarming, as I experienced with my Haval H6. Safety is the top priority - immediately stop and turn off the engine when the warning light comes on, and avoid parking on slopes. Common causes include software glitches or faulty sensors. Try resetting the system by pressing the start button multiple times, but avoid manual operation as it lacks mechanical locking and could be dangerous. For basic checks, simply open the fuse box to inspect fuse conditions and replace any blown ones. For prevention, have technicians test the electrical system during annual maintenance to prevent moisture-induced short circuits. In my case, I had it fixed at an authorized repair shop at reasonable cost - a small price for safety. Remember to avoid excessive battery discharge in daily use.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

What are the advantages of upgrading from C1 to B2 driver's license?

The advantage of upgrading from C1 to B2 driver's license is that the content of Subject 1, Subject 3, and Subject 4 remains unchanged, which are theoretical test, road test, and safe civilized driving test respectively. Examination process for upgrading from C1 to B2 driver's license: Upgrading from C1 to B2 requires starting from Subject 1 again. The content of Subject 1, Subject 3, and Subject 4 remains unchanged, which are theoretical test, road test, and safe civilized driving test respectively. As for Subject 2, it includes pile test, slope fixed-point parking and starting, parallel parking, passing single-plank bridge, curve driving, right-angle turn, passing width-limited gate, passing continuous obstacles, bumpy road driving, narrow road U-turn, as well as simulated highway, continuous sharp bends on mountain roads, tunnels, rainy (foggy) weather, slippery roads, and emergency handling.
18
5
Share

Why is there water leakage at the front reading light of the car?

The reason for water leakage at the front reading light of the car is a problem with the sunroof drainage system, causing the sunroof to leak water to the front reading light area. Below are some maintenance tips for car sunroofs: 1. Daily lubrication: Fully open the car sunroof, wipe off dust on the slide rails with a clean soft cloth, and use a lubricant that does not easily attract dust to lubricate the slide rails and transmission pipes of the sunroof. 2. Pay attention to cleaning: During spring and autumn, you can clean the sealing ring with a damp sponge once every quarter. Before long-term parking of the vehicle, use talcum powder to thoroughly clean the sunroof once to prevent the rubber seal from aging due to chemical changes in the air over time. 3. When using a high-pressure gun to wash the car: When washing the car with a high-pressure water gun, do not directly spray water at the sealing ring around the sunroof, as this can easily cause the sealing ring to deform under the pressure of the high-pressure water jet.
8
0
Share

What brand is anghee tires?

anghee is one of the four major tire brands under Shandong Xinghongyuan Tire Co., Ltd., namely ANCHEE. More extended information is as follows: 1. Company Introduction: Shandong Xinghongyuan Company mainly has four major brands: HILO, XINGYUAN, ANCHEE, and XINGHONGYUAN. The company and its products have passed ISO/TS16949, ISO9001 quality management system certification, ISO14001 environmental management system certification, OHSAS18001 occupational health and safety management system certification, CCC certification, US DOT certification, European ECE certification, Gulf GCC certification, Brazilian INMETRO certification, Indian BIS certification, Nigerian SONCAP certification, etc. 2. Main Business: The company is mainly engaged in the production and sales of semi-steel radial tires, all-steel radial tires for heavy loads, and engineering tires. Currently, it has developed 13 major series, 7 tread patterns, over 160 specifications, and more than 400 varieties of passenger car radial tires, which are exported to more than 100 countries and regions including the Middle East, Europe, America, Africa, Southeast Asia, Hong Kong, and Macau. With its excellent quality and comprehensive after-sales service system, it has won high trust from domestic and foreign customers and enjoys a high reputation in domestic and international markets.
17
3
Share

What does the flashing red car icon on the dashboard mean?

The flashing red car icon on the dashboard indicates that the vehicle's anti-theft system is activated. After turning off the engine and locking the doors, a red car-shaped indicator light on the dashboard flashes once every one to two seconds. This is a normal phenomenon, indicating that the vehicle has entered anti-theft mode. If the light flashes while driving, it suggests that one or more doors are not properly closed. If the indicator remains constantly lit, it indicates a malfunction in the anti-theft system. Here are common issues with the vehicle's anti-theft system: No response when operating the anti-theft system with the remote: This is likely due to insufficient battery power in the remote, causing it to malfunction. Replacing the battery and retrying should resolve the issue. Electronic signal interference: If the parking location has signal interference, the vehicle may not respond to remote operations. In this case, move the car to another location and attempt to lock it again. Decreasing remote operation range: When using the remote to unlock or lock the doors, you need to be very close to the vehicle for it to work. This is usually caused by low battery power in the remote, and replacing the remote battery should fix the problem.
14
0
Share

What Does It Mean When a Spark Plug Tip Turns White?

The causes of a spark plug tip turning white include early ignition timing and poor cooling conditions; the use of low-quality fuel; cylinder leakage or insufficient installation torque. It is necessary to promptly clean the engine carbon deposits and replace the spark plug after cleaning. Steps for replacing spark plugs: Open the hood, lift the engine's plastic cover, remove the high-voltage distributor wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. During removal, check for external debris such as leaves or dust and ensure thorough cleaning. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage distributor wires in the firing order and secure the cover. Spark plug replacement interval: Under normal maintenance conditions, replace spark plugs every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is recommended to follow the owner's manual. The following standards can be used as a reference: Platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers.
12
2
Share

How Long is the Lifespan of Porsche Cayenne Wheel Hubs?

Automotive wheel hubs have a relatively long lifespan and can be used for an extended period if undamaged. Methods to extend the lifespan of automotive wheel hubs are as follows: 1. Thoroughly Clean Wheel Hub Bearings: During maintenance, wheel hub bearings must be thoroughly cleaned and inspected to ensure they are free from fractures, detachment, cracks, or burn marks. They should also be completely dried to remove any moisture. Failure to do so may compromise the lubrication effectiveness of the bearing's grease, reducing the bearing's lifespan. 2. Ensure Adequate Lubrication of Wheel Hub Bearings: While applying a thin layer of anti-rust grease inside the wheel hub cavity, it is essential to ensure the wheel hub bearings are sufficiently lubricated. Maintenance personnel should manually apply pressure and rotate the bearings repeatedly to inject grease until the roller bearings are fully packed with grease. Only then can the lubrication be considered complete, ensuring optimal lubrication and normal wear of the wheel hub bearings. 3. Strictly Adhere to Maintenance Procedures: During maintenance, technicians must strictly follow technical specifications to clean, inspect, adjust, lubricate, and tighten all components. This ensures maintenance quality and guarantees the vehicle's braking performance. 4. Monitor Operating Conditions in Real-Time: While the vehicle is in operation, coordinate with the driver to observe whether there are any abnormal sounds, high temperatures, or reduced braking performance in the wheels. Collect information promptly and address any issues to eliminate potential faults.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.