How to Deal with the Electronic Handbrake P with a Slash?
4 Answers
It indicates a malfunction in the electronic parking brake. Drive with caution and have it inspected at a repair shop as soon as possible. Turn on the car key, press the foot brake, then hold down the electronic handbrake for 5 seconds and pull it up for another 5 seconds to perform an initialization reset.
I also encountered this electronic parking brake P with a slash fault last time. The warning light suddenly came on while driving, which gave me a scare. This usually indicates that the system has detected a problem, such as a stuck sensor or loose wiring. It's recommended to stop the car, turn off the engine, wait a few minutes, and then restart the car. Sometimes false alarms can reset themselves. If that doesn't work, check if there's an emergency release cord in the car, often located under the seat. Gently pull it to temporarily unlock the parking brake. Don't drive recklessly; if it locks up, it could be even more troublesome. Regularly clean the sensor area around the wheels to avoid dust buildup that could trigger false alarms. If you really can't fix it, go to the 4S shop and have a technician read the fault codes to thoroughly check the wiring or replace the module. Don't skimp on this small expense as it could affect driving safety.
When encountering the P-slash display on the electronic parking brake, as a regular car owner, don't panic: After parking, try pressing the release button several times to see if it disengages. If that doesn't work, check the emergency guide in the vehicle manual—many cars have a manual release device hidden in the trunk or center console area. Also, ensure the battery has sufficient charge, as low power can trigger false alarms. A simple fix is to disconnect the negative terminal for 10 minutes to reboot the electronic control system, which may reset the error. Remember, this isn't a permanent solution—after emergency handling, schedule a repair shop ASAP to inspect sensor and control unit issues. Don't delay until an accident occurs. Regularly clean the electronic component areas during car washes.
When the electronic parking brake shows a P with a slash, it usually indicates a system malfunction or false detection. Quick fix: Turn off and restart the vehicle to see if the warning disappears. If it persists, locate the emergency release cable for manual unlocking to avoid being unable to drive. Check the fuse box, as the relevant fuse might have blown. Quickly inspect if the sensor is clogged with dust, clean it, and reset the system. Don't wait for the issue to escalate—address it promptly.
