How to Deal with Substandard Vehicle Exhaust Emissions?

2 Answers
CamilaLee
07/29/25 6:36am
Methods to address unqualified exhaust emissions mainly include: 1. Replace and clean the spark plugs: Spark plugs are crucial components responsible for igniting and starting the car. If they are not cleaned or replaced for a long time, carbon buildup and aging on the spark plugs can lead to incomplete gasoline combustion due to reduced ignition efficiency, resulting in substandard emissions. 2. Replace the carburetor: The carburetor's role is to atomize gasoline, ensuring more complete combustion. If the carburetor is not cleaned for an extended period, it may cause incomplete gasoline atomization, leading to incomplete combustion in the engine. This not only results in significant carbon deposits but also causes emission issues. 3. Replace the oxygen sensor: The primary function of the oxygen sensor is to detect the oxygen concentration in the engine's exhaust gases. It measures the oxygen content in the exhaust to determine whether the gasoline is fully burned. If the oxygen sensor is faulty, it cannot detect whether the exhaust meets the standards, which may lead to failure in annual inspections.
Was this review help?
9
5
Share
StCaden
08/12/25 10:24pm
I've been driving an old car for over a decade and encountered excessive exhaust emissions multiple times. Don't panic, check step by step. First, go to a repair shop and have the mechanic check the fault codes—it might be due to a clogged or failed catalytic converter, which is a common cause. They may suggest replacing the catalyst or cleaning the fuel injectors and throttle body to help the fuel burn more completely. Worn-out spark plugs can also affect emissions, so try replacing them yourself. A dirty air filter can obstruct airflow, so clean or replace it promptly. Don’t slack on regular maintenance—change the oil periodically and use high-quality fuel to avoid carbon buildup. Emission issues directly impact annual inspections, and failing could result in fines of thousands or even affect driving safety. I recommend getting an annual exhaust emissions test to catch and fix problems early, saving money and hassle.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

Where is the USB port located on the Trumpchi GS7?

The USB port on the Trumpchi GS7 is located below the central control screen and in front of the gear lever. The function of the USB port is to utilize the standard power supply of the vehicle to charge DC5V electrical devices. Taking the 2021 Trumpchi GS7 as an example, it belongs to the compact SUV category, with body dimensions of: length 4730mm, width 1910mm, height 1770mm, wheelbase 2720mm, minimum ground clearance 190mm, and fuel tank capacity 66l. The 2021 Trumpchi GS7 is equipped with a 2.0T inline 4-cylinder turbocharged engine, with a maximum horsepower of 252PS, maximum power of 185kW, maximum torque of 390Nm, and is paired with a 6-speed automatic transmission.
12
1
Share

What is the top speed of the GPR150?

GPR150 accelerates from 0 to 100 km/h in 12 seconds. Power configuration: Equipped with a single-cylinder four-stroke water-cooled engine, the maximum speed can reach 130km/h. It adopts a typical high-revving engine, which can only unleash its powerful performance when the engine is running at high RPMs. In terms of configuration, this motorcycle features a twin-spar aluminum alloy hollow frame and an asymmetric double swingarm. It uses CST semi-slick tires, with a front 300mm disc brake with radial calipers and a rear 218mm disc brake. Exterior design: Inheriting the appearance of the Aprilia RS4, the overall styling is quite full-bodied. However, due to the limited height of this motorcycle, safety precautions should be taken during riding.
11
4
Share

Should Rear Brake Pads Be Replaced at 5mm?

Typically, a brand-new set of brake pads has a thickness of around 1.5cm. When the thickness of the brake pads is less than 5mm, they need to be replaced. Introduction to Brake Pads: Brake pads are composed of friction material layer, heat insulation layer, adhesive layer, backing plate, etc. The brake pads work by the brake caliper pushing the backing plate to press the friction material against the brake disc for braking, so the quality of the friction material is particularly important. Precautions for Brake Pads: Emergency braking causes significant damage to the brake pads. Therefore, when driving normally, it is advisable to brake gradually or use the method of intermittent braking (pumping the brakes), which results in less wear on the brake pads.
3
1
Share

What is the working principle of an oil pressure sensor?

The working principle of an oil pressure sensor is: 1. The amplified pressure signal is transmitted through a signal wire to the oil pressure gauge, altering the current ratio between the two coils inside the gauge to indicate the engine's oil pressure; 2. The pressure signal, after voltage and current amplification, is also compared with the preset alarm voltage in the alarm circuit. When the signal falls below the alarm voltage, the alarm circuit outputs an alarm signal and illuminates the warning light via the alarm wire. Solutions for excessively high oil pressure include: 1. Adjusting the clearance between the shaft neck and bearing in pressure-lubricated areas; 2. Cleaning the oil pipes and passages, and maintaining the filter; 3. Selecting the appropriate oil grade; 4. Replacing the oil with one of suitable viscosity; 5. Inspecting and adjusting the pressure relief valve on an oil pump test bench to ensure the oil pressure meets specified requirements.
13
2
Share

What are the functions of a multi-function instrument panel?

As the display terminal of the onboard computer, the multi-function instrument panel differs from traditional car instrument panels. In addition to displaying speed and engine RPM, it can also show current fuel consumption, temperature, remaining range, and even includes practical functions like a compass. In contrast, ordinary LCD instrument panels only have single functions such as displaying time and water temperature. Here is an introduction to the instrument panel: Introduction: The car instrument panel is a device that reflects the working status of various vehicle systems. Types of indicator lights: Coolant level warning light, fuel level indicator, washer fluid level indicator, charging indicator, high/low beam indicator, transmission gear position indicator, anti-lock braking system (ABS) indicator, traction control indicator, airbag (SRS) warning light, etc.
12
4
Share

Why do headlights have yellow light?

Because yellow light has strong penetration, the actual power of general headlights needs to be 5w, above 1000 lumens, and yellow light between 3000k and 4200k is recommended. Here is some extended information about car headlights: Function: The function of car headlights is to provide illumination for night driving. Car headlights are also known as car front lights or car LED daytime running lights. As the eyes of a car, they not only relate to the external image of a car owner but are also closely linked to safe driving at night or under bad weather conditions. Types: Car lights can be divided into two types by purpose: lighting and auxiliary. Among them, only the headlights and some fog lights equipped on cars serve the purpose of lighting, while the rest are auxiliary lights.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.