How to deal with speeding by 10%?

2 Answers
Anna
09/03/25 2:16am
For violations where the speed exceeds the prescribed limit by less than 10%, a warning will be issued. Here is some relevant information about speeding violations: Content: For violations where the speed exceeds the prescribed limit by less than 10%, a warning will be issued; for violations where the speed exceeds the prescribed limit by 10%-20%, 3 points will be deducted and a fine of 200 will be imposed; for violations where the speed exceeds the prescribed limit by 20%-50%, 6 points will be deducted and a fine of 200 will be imposed; for violations where the speed exceeds the prescribed limit by more than 50%, 12 points will be deducted, a fine of 2000 will be imposed, and the driver's license will be revoked. Notes: Bring your ID card, driver's license, and vehicle registration certificate to the traffic police team at the place of violation or vehicle registration to process the violation and print the processing form. If there is no fine or points deduction, the process is complete after printing the form. If there is a fine or points deduction, pay the fine and wait until the end of the current scoring cycle for the points to be cleared.
Was this review help?
16
1
Share
DanielaFitz
09/15/25 4:04am
Last time I accidentally exceeded the speed limit by 10% while driving and received a warning text message without any points deduction or fine, but I felt quite nervous. I immediately went to the traffic police station to confirm, and they said I didn't exceed by much and just to be more careful next time. I usually enjoy driving on highways and tend to overlook my speed, so now I use my phone's navigation for speed alerts to avoid mistakes. Handling speeding is simple: first check if you've received a notice—if not, no worries; if you have, promptly pay the fine or visit the traffic station. Never delay, as accumulated offenses can affect your credit and insurance. Also, safety comes first—even slight speeding can lead to accidents, especially in rain or snow. Make it a habit to check speed limit signs to protect yourself and others.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

Where is the OBD interface of Dongfeng Fengguang 330 located?

The OBD interface of Dongfeng Fengguang 330 is located inside the glove compartment on the passenger side. Additional relevant information is as follows: 1. OBD refers to the On-Board Diagnostics system. When a vehicle malfunctions, the warning light on the dashboard will illuminate, and the On-Board Diagnostics system will generate corresponding fault codes, which are uploaded to the vehicle's computer. This helps repair personnel quickly identify the issue. 2. The dimensions of Dongfeng Fengguang 330 are 4365mm in length, 1720mm in width, and 1790mm in height, with a wheelbase of 2725mm, front track of 1425mm, and rear track of 1445mm.
13
2
Share

What are the types of automotive drive systems?

Modern passenger vehicles feature various drive configurations, including Front-engine Front-wheel drive (FF), Front-engine Rear-wheel drive (FR), Front-engine All-wheel drive, Mid-engine Rear-wheel drive (MR), Mid-engine All-wheel drive, Rear-engine Rear-wheel drive (RR), and Rear-engine All-wheel drive. Below are details about these drive systems: 1. The drive system refers to the arrangement of the engine and the number and position of the driven wheels. 2. Front-engine Front-wheel drive (FF) is the most prevalent configuration in passenger cars, though it is rarely used in trucks and buses. 3. This layout is predominantly found in passenger vehicles with engine displacements below 2.5L.
1
0
Share

How to Avoid Crossing the Line in Curve Driving for Subject 2?

Remember the mantra: "Left point aligns with right line, right point aligns with left line". Here is the relevant information: 1. The left and right points refer to the left and right top corners of the car's front. This means when turning in a certain direction, use that corner to follow the opposite side's road edge line. 2. Before entering the curve, slow down in advance. If the speed is too fast, it will be difficult to observe and steer simultaneously, making it easy to cross the line and fail. Also, follow the principle of taking the outer line: try to choose a route with a larger turning radius. For example, if preparing to turn left, the vehicle should stay closer to the right side.
14
4
Share

What suspension does the Skoda Superb use?

Skoda Superb uses a MacPherson independent suspension for the front and a four-link independent suspension for the rear. The MacPherson independent suspension is one of many suspension systems, widely applied in the market due to its simple structure, low cost, and decent comfort. The four-link independent suspension consists of links, shock absorbers, and damping springs, ensuring a certain level of comfort. Additionally, the multiple links help keep the wheels perpendicular to the ground, reducing body tilt. The Skoda Superb is a business vehicle under the Skoda brand, retaining many design elements from the VisionC concept car. The use of straight lines and chrome materials makes it look more fashionable and dynamic, appealing more to younger consumers.
15
1
Share

What is the operation method of braking?

The operation method of braking is: 1. In case of abnormal brake pedal, use engine braking and shift to a lower gear; 2. In traffic congestion, gently press the brake pedal; 3. On rainy or muddy roads, lightly press the brake pedal continuously; 4. In emergency situations, firmly press the brake pedal immediately and then release it slowly, followed by continuous gentle pressing and releasing of the brake pedal. The maintenance methods for brakes are: 1. High-temperature protection to prevent corrosion of the braking system and avoid brake pads from seizing due to high temperatures; 2. Clean oil stains from brake discs and brake drum components to ensure good heat dissipation of the brake discs; 3. Regularly replace brake fluid; 4. Regularly check the thickness of brake pads or brake shoes.
6
4
Share

What is the original tire model for the 10th generation Accord?

The 10th generation Accord comes with three original tire models: 225/50R17, 215/60R16, and 235/45R18. The Accord is a mid-size sedan under Honda, equipped with three engine options: a 2.0L naturally aspirated engine, a low-power 1.5L turbocharged engine, and a high-power 1.5L turbocharged engine. The 10th generation Accord is a 4-door, 5-seater sedan launched by Honda, featuring a youthful and sporty exterior, a premium chassis, and spacious interiors. Its front fascia boasts a stylish and cool design with hints of a sports car. The LED headlights adopt a wing-shaped design with intricate detailing, presenting a refined and layered appearance, complemented by blue light sources.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.