How to deal with speeding 20% but less than 50% on ordinary roads?

1 Answers
Julian
07/24/25 9:24pm
Speeding 20% but less than 50% on ordinary roads will result in 6 penalty points and a fine; speeding within 10% of the prescribed speed limit will not incur fines or penalty points. Speeding is illegal because, from the perspective of safe driving behavior, vehicles must not exceed the legally prescribed maximum speed or the speed limit indicated by traffic signs. Specific manifestations of speeding include: Exceeding the maximum speed limit of the road or the speed indicated by traffic signs; competing with pedestrians at crosswalks; failing to slow down before turning or when passing intersections; driving too closely to other vehicles, cutting in line, or jostling for position, and failing to comply with speed limits on highways; Failing to reduce speed when driving at night, in hazardous road sections, or under adverse weather conditions such as sandstorms, hail, rain, snow, fog, or icy conditions.
Was this review help?
7
0
Share
More Forum Discussions

What are the consequences of water ingress in a car's computer board?

Water ingress in a car's computer board can cause various electrical components to short-circuit due to the water. Below is relevant information about car computer boards: 1. Definition: A car computer is an electronic device that automatically processes input signals from various sensors according to preset programs, then outputs signals to actuators to control the vehicle's operation. 2. Classification: Car computers are now widely used, such as body computers, engine computers, transmission computers, and ABS computers. Although the number and types of computers configured in different vehicle models vary, the general development trend is to use one main computer to process input signals from most sensors, while using smaller electronic control units to manage other systems. 3. Composition: The main component of a car computer is a microcontroller. A microcontroller is a circuit board that integrates a microprocessor (CPU), memory, and input/output interfaces. The microprocessor is the core component of the microcontroller, converting input analog signals into digital signals, comparing them with stored reference data for processing, and calculating output values. The output signals control the actuators after power amplification.
1
0
Share

Waxing in Rainy or Sunny Weather?

Generally, waxing is best done on sunny days. Here are some relevant introductions about car waxing: 1. The role of car waxing: As a traditional item of car beauty, the function of waxing is to waterproof and protect against acid rain. With the protection of car wax, the amount of water droplets adhering to the car body can be significantly reduced, with an effect ranging from 50% to 90%. Another function is to protect against high temperatures and UV rays. As the weather gets hotter, cars that are driven or parked outdoors year-round are prone to paint aging and fading due to sunlight exposure. The film formed by waxing can reflect some of the light. 2. Precautions for car waxing: The interval between waxing should vary depending on the driving environment and parking location of the vehicle. Before waxing, it is necessary to thoroughly clean the dirt and dust on the exterior of the car body.
4
0
Share

Which Gear to Use When Driving Uphill?

When driving uphill, the appropriate gear depends on the steepness of the slope. Here is a detailed explanation of gear selection for uphill driving: 1. Small Slope Gear Selection: When going up a small slope, observe the car's climbing power. Each vehicle has its own climbing capability. If fourth gear provides sufficient power, use fourth gear for climbing. 2. Medium Slope Gear Selection: For a medium slope, use third gear if it provides enough power. If third gear is insufficient, switch to second gear (this can be done either at the bottom or during the climb, but requires proper coordination of the clutch and accelerator). 3. Steep Slope Gear Selection: On a steep slope, try to use second gear if it provides sufficient power. If second gear is inadequate, switch to first gear for climbing.
8
5
Share

How to turn on the air conditioning cooling in Haval M6?

Haval M6's air conditioning is controlled by a round dial about 5CM in diameter on the right side, with buttons on the dashboard to turn it on. In the mode adjustment section, there is a sun icon indicating heating. When adjusted to this mode, it will start blowing hot air. The first row, from left to right, includes the air conditioning cooling switch, head vent switch, foot and front windshield vent switch, and front windshield vent switch. Here is some additional information: Refrigerant: The refrigerant continuously circulates in the system, with each cycle including four processes: compression, condensation, throttling, and evaporation. The vehicle air conditioning system consists of a compressor, condenser, throttling element, evaporator, fan, and necessary control components, designed to regulate the temperature and humidity inside the car and provide a comfortable environment for passengers.
1
4
Share

Is it necessary to apply undercoating to cars nowadays?

It is necessary to apply undercoating to your car. After quick drying, the undercoating forms a firm yet elastic protective layer that prevents impacts from flying stones and gravel, protects the vehicle's metal undercarriage from moisture, acid rain, and salt corrosion, prevents rusting and corrosion of the chassis, and ensures driving safety for the owner. Relevant information about undercoating is as follows: 1. Introduction: The technical term for automotive undercoating is "UNDERCOATING" primer, a high-tech adhesive rubber asphalt coating. It is non-toxic, offers high coverage, and has strong adhesion. 2. Function: After quick drying, it forms a firm yet elastic protective layer that prevents impacts from flying stones and gravel, protects the vehicle's metal undercarriage from moisture, acid rain, and salt corrosion, prevents rusting and corrosion of the chassis, and ensures driving safety for the owner.
4
2
Share

The Difference Between 95 and 92 Gasoline

The difference between 95 and 92 gasoline mainly lies in the different proportions of chemical substances they contain, resulting in variations in octane number, fuel consumption, and price. Below is an introduction to the differences between 92 and 95 gasoline: 1. Octane Number Ratio: 92 gasoline consists of 92% isooctane and 8% n-heptane; 95 gasoline consists of 95% isooctane and 5% n-heptane. The higher the octane number, the better the anti-knock performance. 2. Price: 92 gasoline is slightly cheaper than 95 gasoline. 3. Fuel Consumption: 92 gasoline has relatively poor anti-knock performance, so its ignition timing needs to be delayed, leading to faster fuel consumption in the car. 95 gasoline has relatively strong anti-knock performance, resulting in slower fuel consumption in the car. 4. Applicable Compression Ratio: 92 gasoline is suitable for engines with a compression ratio between 8.6 and 9.9. 95 gasoline is suitable for engines with a compression ratio between 10.0 and 11.5.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.