How to Deal with Small Yellow Spots on White Car Paint?

1 Answers
BraydenRose
07/29/25 11:36am
Solutions for small yellow spots on white car paint: 1. Use a clay bar dipped in water to rub the affected areas vigorously, then rinse with clean water; 2. Spray an iron remover on the yellow spots, let it soak for 4 to 6 minutes, then rinse thoroughly with water. If necessary, use a cleaning solution; 3. Take the car to a 4S shop for polishing, waxing, or ceramic coating treatment. Causes of small yellow spots on white car paint: 1. The car is parked outdoors, and rainwater mixed with iron particles falls on the surface. If not washed in time, rust spots form on the paint; 2. The car is not driven frequently, and the paint is exposed to air for long periods. Factors such as air humidity, salt content, rainwater pH, and UV intensity contribute to paint oxidation.
Was this review help?
13
0
Share
More Forum Discussions

What is the fuel tank capacity of the Mercedes-Benz S-Class?

The Mercedes-Benz S-Class has a total of 5 models, all with a fuel tank capacity of 76 liters. The Mercedes-Benz S-Class is equipped with 2.5-liter and 3.0-liter turbocharged + electric supercharged engines, and the transmission type is an automatic transmission (AT), with the front suspension being a double-wishbone independent suspension. Among vehicles in the same class, the 2019 facelift Plus A8L 50 TFSI quattro Comfort model has a fuel tank capacity of 82 liters, and the BMW 7 Series 2021 730Li Luxury Package has a fuel tank capacity of 78 liters. During the actual refueling process, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by car manufacturers is the volume from the bottom of the tank to the safety limit, and there is still some space from the safety limit to the tank opening. This space is reserved to ensure that the fuel in the tank can expand when the temperature rises without overflowing the tank's safety space. If the fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the calibrated fuel tank capacity. If the owner wants to know the remaining fuel in the tank, they can observe the fuel gauge on the right side of the dashboard, which is marked with E and F. When the pointer is close to E, it means the fuel is almost empty, and when it is close to F, it means the fuel is sufficient.
15
2
Share

What are the reasons why the Audi A4 cannot start?

The reasons why the Audi A4 cannot start include issues with the electrical system and air-fuel mixture concentration, the need to replace the battery, misfiring spark plugs or ignition coils, severe carbon buildup, insufficient fuel pump pressure, and the need to clean the throttle body and fuel injectors. Solutions for the Audi A4 not starting: Check if the battery is low on charge and recharge it, repair a damaged fuel pump promptly, check if there is sufficient fuel and add more if needed, and inspect if the engine sensors are damaged. When starting the car, it is important to observe the information on the dashboard, check if the tires and chassis are normal, release the handbrake before starting, warm up the engine before driving, and shift from low to high gears. Most modern cars now use a push-button start system instead of the traditional mechanical key ignition. Simply pressing the button can start or stop the engine, avoiding the hassle of losing car keys. When using the push-button start, you need to press the foot brake to start. The start button uses chip control for reliable performance, and cars with push-button start usually come with a smart keyless entry system that automatically unlocks the doors when the key is near, making starting the car and opening/closing the doors more convenient.
3
2
Share

Where is the tire pressure calibration located on a Mercedes?

Adjust the tire pressure via the buttons on the steering wheel, then select the tire pressure reset option. Mercedes tire pressure reset: Tire pressure reset is an operation performed on the tire pressure monitoring system after addressing a tire pressure fault, to reset the system. Tire pressure reset method: First, turn on the ignition, press and hold the tire pressure monitoring reset button until you hear a "ding" sound, then release. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally the dashboard warning light will turn off, indicating the tire pressure reset is complete. Mercedes tire pressure monitoring light on: The tire pressure monitoring indicator is a yellow symbol, an irregular circle with no stamp on top, four small spikes at the bottom, and an exclamation mark inside. The tire pressure monitoring light indicates abnormal tire pressure. Abnormal tire pressure is generally caused by one of the following three reasons: Abnormal tire pressure: Typically, an alert is triggered if the pressure is below 1.8 bar or above 3.0 bar. In this case, inspect the tires and adjust the pressure. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure reset is not performed promptly, the tire pressure monitoring system retains the old data, causing the tire pressure monitoring light to stay on. Simply perform a tire pressure reset to resolve this. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving (e.g., by hitting a curb), the tire pressure warning light may illuminate. In case of sensor damage, the only solution is to replace it with a new one.
15
2
Share

Does the Audi A4 have four-wheel drive?

Audi A4 does have four-wheel drive models. The domestically produced Audi A4L comes in both front-wheel drive and four-wheel drive versions. Only the models equipped with the high-power 2.0-liter turbocharged engine have four-wheel drive, while other models are front-wheel drive. Additional information: Engine: The high-power 2.0-liter turbocharged engine delivers 252 horsepower and 370 Nm of maximum torque. This engine can output maximum power at 5000 to 6000 rpm and maximum torque at 1600 to 4500 rpm. This engine is equipped with AVS technology and hybrid injection technology, and uses an aluminum cylinder head and cast iron cylinder block. Suspension configuration: The domestically produced Audi A4L uses a five-link independent suspension for the front suspension and a five-link independent suspension for the rear suspension.
13
1
Share

Has the Wuling Hongguang been launched?

Wuling Hongguang is about to be launched. Since its debut in 2010, the Wuling Hongguang series has accumulated sales of over 4.5 million units. During this process of user accumulation, it has also witnessed the formation of car culture and the fermentation of internet memes, ultimately elevating it to a legendary status. On October 16th, the Hongguang family welcomed its most stylish model—the Hongguang PLUS, with the new car launching in three variants. Below are the relevant details: Exterior and Interior: The design of the new car mainly continues the Wuling family's design language, featuring a large front grille paired with sizable headlights on both sides, giving it a very robust appearance. The interior is very tidy, with the most eye-catching element being the large central control screen. Powertrain: It is equipped with a 1.5T turbocharged engine, delivering a maximum power of 108kW and a maximum torque of 250N.m. This engine is no stranger, having served in multiple models such as the Baojun 510.
8
1
Share

What is the wheelbase of the Audi A4?

Audi A4 is a mid-size car under the Audi brand, with a wheelbase of 2817mm, and its length, width, and height are 4858mm, 1847mm, and 1411mm respectively. The Audi A4 is equipped with three types of engines: a low-power 2.0L turbocharged engine, a medium-power 2.0L turbocharged engine, and a high-power 2.0L turbocharged engine. The low-power version of the 2.0-liter turbocharged engine in the Audi A4 has a maximum power of 110kW and a maximum torque of 270Nm. This engine uses hybrid injection technology, with an aluminum alloy cylinder head and a cast iron cylinder block. The medium-power version of the 2.0-liter turbocharged engine has a maximum power of 140kW and a maximum torque of 320Nm. This engine also uses hybrid injection technology, with an aluminum alloy cylinder head and a cast iron cylinder block. The high-power version of the 2.0-liter turbocharged engine has a maximum power of 185kW and a maximum torque of 370Nm. This engine employs direct injection technology, with an aluminum alloy cylinder head and a cast iron cylinder block.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.