How to Deal with Shattered Car Glass?

2 Answers
LeviRose
07/28/25 2:52pm
Here are the methods to handle shattered glass: 1. Check how long the car has been purchased and whether it is within the warranty period. Visit the 4S shop to determine if it is a quality issue. 2. Check if there is glass insurance in the car insurance policy. If so, report the incident on-site, and the insurance company will handle it. 3. If none of the above options work, you will have to pay out of pocket. For glass cracks, the extent of the crack must be assessed. Cracks less than 15 cm can be fully repaired, while those longer than 15 cm require expert evaluation to determine if repair is possible. If repair is not feasible, replacement is necessary. The repairable ranges are as follows: 1. Star-shaped damage, bullseye-shaped damage, and cracks. 2. Cracks less than 15 cm can be fully repaired, while those longer than 15 cm require expert evaluation. 3. Immediate repair after damage yields better results. Generally, repairs should be done within two weeks. Beyond this period, the damage may expand, and dust entering the cracked area may leave subtle marks after repair.
Was this review help?
3
5
Share
DiCorbin
08/11/25 10:41pm
When a car window shatters, the most crucial thing is to stay calm and not panic. If you hear a loud noise or see cracks while driving, slow down immediately, pull over safely, and turn on your hazard lights to prevent rear-end collisions. Check if anyone in the car is injured, as flying glass shards can easily cause cuts. Once safe, inspect the broken area and use the car’s cardboard or old cloth to remove debris carefully to avoid further harm. If the crack is small, you can try using transparent tape to temporarily hold the windshield together to prevent spreading—but don’t rely on it entirely, as it’s only a short-term fix. Then, contact a professional repair shop or your insurance company for assistance. If the incident happens on a highway, call for a tow truck. Shattered glass is often caused by rocks hitting the windshield, sudden temperature changes, or glass aging. Staying alert to road conditions and avoiding high speeds can reduce such risks. Replacing the glass may cost money, but safety is priceless!
Was this review help?
6
0
Share
Expand All
More Forum Discussions

How deep a cut on the tire shoulder requires replacement?

Tire sidewall cuts of 4mm depth are recommended for replacement. Below is relevant information about tire shoulders: 1. Introduction: The transition area between the tread crown and sidewall. Due to the small curvature of the tread surface and large curvature of the carcass ply layer, rubber material must fill the lower sides of the tread during manufacturing, forming the shoulder area. 2. Characteristics: Shoulder thickness generally doesn't exceed 1.35-1.60 times the tread thickness. Excessively thick shoulders may cause shoulder separation or cracking. Therefore, various patterns are typically designed in this area, connecting with tread grooves for heat dissipation. For truck tires, shoulder patterns additionally bear overload pressure during turns and help improve traction.
11
5
Share

What are the consequences of selling a car as scrap without deregistering it?

The consequences of selling a car as scrap without deregistering it: 1. Inability to deregister: If the car is directly sold as scrap, scrap yards generally cannot issue valid recycling certificates. Without complete documentation, the deregistration process cannot be completed. To deregister a vehicle, it must first be scrapped at an authorized vehicle recycling company, and then the relevant recycling certificate must be obtained before the vehicle records can be deregistered. 2. New vehicles cannot be registered: If a car is sold as scrap without deregistering it, this will affect subsequent driver's license inspections, and the vehicle management department will suspend the registration of newly purchased vehicles. Additionally, if the vehicle is privately resold or dismantled for scrap, the right to register new vehicles will also be lost.
14
3
Share

How many liters of transmission oil should be added to the Elantra?

The Elantra requires approximately 4L of transmission oil. Below are the specific details about transmission oil: 1. Function: Transmission oil is a lubricant used to maintain the cleanliness of a car's gear system. It lubricates to prolong the lifespan of the transmission components, provides effective lubrication even at low temperatures, and reduces oil loss under harsh operating conditions. 2. Types: It is divided into automatic transmission fluid and gear oil. Automatic transmission oil is specifically designed for automatic transmissions. Manual transmission oil, commonly referred to as gear oil, is primarily composed of petroleum-based lubricating oil or synthetic lubricating oil, blended with extreme pressure anti-wear agents and oiliness agents to form an essential lubricant.
18
3
Share

What are the symptoms of a bad brake master cylinder?

The manifestations of a faulty brake master cylinder are as follows: 1. Component failure: Oil leakage occurs at the connection between the brake master cylinder and the vacuum booster or at the limit screw, poor or ineffective braking after fully depressing the brake pedal, and a soft feeling when pressing the brake pedal. 2. Brake failure: The vehicle pulls to one side after braking, sudden brake failure, the brake pedal not returning or returning slowly. Relevant information is as follows: 1. Definition: The brake master cylinder, also known as the "brake main cylinder" or "brake master cylinder", is the main coordinating component of the vehicle's braking system. 2. Classification: Depending on the vehicle, it is divided into two types: air brake master cylinders and hydraulic brake master cylinders. Generally, passenger cars mostly use hydraulic brake master cylinders, while commercial vehicles (such as trucks, buses, tractors, etc.) usually use air brake master cylinders.
8
4
Share

What brand is dpals tire?

dpals tire is a Dunlop brand. The birth of Dunlop digital tires has led to a significant improvement in the basic performance of tires, including safety, comfort, and economy. Digital tire simulation technology represents cutting-edge technology that uses supercomputers to simulate rotating tire models, enabling various simulation experiments. These include tire tread noise simulation, air pressure variation simulation, gas penetration simulation, steel wire external force absorption simulation, rubber formula simulation, wear energy distribution simulation, tire noise simulation, real vehicle driving simulation, and road environment simulation. Through digital tires, it is possible to simulate driving conditions that closely approximate real-world scenarios without limitation, obtaining ground contact data that cannot be acquired during real vehicle experiments.
9
0
Share

Where is the OBD port located in a car?

The OBD port in a car is located in different positions depending on the vehicle model. For most cars, the OBD port is found below the lower left side of the instrument panel. If it cannot be found there, you can check above the pedals or in front of the gear shift lever. The function of the OBD port is: the OBD system continuously monitors the vehicle's exhaust emissions from the engine's operating conditions and immediately issues a warning if the emissions exceed the standard. When a system malfunction occurs, the malfunction indicator light or engine warning light will illuminate, and the Powertrain Control Module (PCM) will store the fault information in memory. The fault code can be read from the PCM through a specific procedure. Based on the fault code, maintenance personnel can quickly and accurately determine the nature and location of the fault.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.