How to Deal with Severe Engine Shaking?

1 Answers
DelNora
07/29/25 9:46pm
Methods to handle severe engine shaking:1. Observe the engine operation condition and the degree of shaking, while also checking the swing amplitude of the engine tachometer needle to see if it deviates from the idle expectation value. If it deviates, the car engine will definitely shake, and the idle expectation value needs to be adjusted. 2. Check if there are any abnormalities in the engine external components. If there are, professional repair or replacement is needed. 3. Check if the vacuum tube is detached or damaged. If these parts are compromised, the car engine will also shake, and it's best to replace them. 4. Check if the wire connectors are loose. Loose wires can also cause engine shaking, and simply tightening them can solve the issue. 5. Check for any oil, water, air, or electricity leaks (the four leaks). Any of these leaks can cause engine shaking, so it's important to stop the leak promptly. 6. Check if the exhaust pipe emits black smoke or has a raw gasoline smell, which are abnormal phenomena. These abnormalities can lead to engine shaking, so timely repair is necessary if they occur. 7. Check if the throttle cable is properly adjusted. Improper adjustment can also cause engine shaking, and the throttle cable needs to be adjusted to the correct position.
Was this review help?
5
2
Share
More Forum Discussions

How often should the transmission fluid of the Tiida be changed?

Tiida should have its transmission fluid changed every 40,000 kilometers. Here is some information about transmission fluid: 1. Transmission fluid keeps the transmission system clean and ensures it operates normally, while also extending the lifespan of the vehicle's transmission components. 2. Depending on the structure, transmission fluid can be divided into manual transmission fluid and automatic transmission fluid. Automatic transmission fluid is also known as ATF, which serves as both a transmission fluid and a hydraulic fluid, and can be used in different parts of the vehicle. Additional information: 1. Body dimensions. The Tiida measures 4393mm in length, 1766mm in width, and 1539mm in height, with a wheelbase of 2700mm. 2. Transmission. The drive type is front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam non-independent suspension.
3
2
Share

What does the 'front' button in a car mean?

The 'front' button in a car refers to the switch for the front windshield defroster. The symbol for the front windshield defroster is a fan-shaped pattern with three upward lines, while the rear windshield defroster is represented by a rectangular pattern with three upward lines. The windshield defroster helps reduce moisture, fog, and frost on the front and rear glass surfaces, improving the driver's visibility and reducing driving risks. Here are some precautions when using the 'front' button: To prevent battery drain, avoid unnecessary continuous operation of the defroster and de-icing system for extended periods.
10
4
Share

How to Repair Peeling Car Paint?

Peeling car paint can be repaired by following these steps: 1. Clean the surface of the car paint and ensure it is thoroughly dry; 2. Remove the peeling portion of the paint; 3. Reapply the paint using the required coating method and materials. The causes of peeling car paint include: 1. Poor surface treatment of the paint, contaminated by wax, grease, water, or rust; 2. Failure to use a metal surface treatment agent on steel or aluminum surfaces or using the wrong type of treatment agent; 3. The surface temperature of the substrate being too high or too low during spraying; 4. Improper application of primer, use of the wrong type or poor-quality thinner; 5. Excessive pressure of the compressed air.
2
4
Share

What are the penalties for an expired temporary license plate on a new car?

New cars must not use temporary license plates for more than 15 days, and owners should promptly apply for official license plates from the vehicle management authority. After expiration, penalties may include vehicle impoundment, a fine of 200 yuan, and a deduction of 12 points. Here is more information about temporary license plates: 1. There are two types of temporary license plates: one with a sky-blue background, black characters, and black borders, which is only valid for driving within the city (local temporary license plate); the other has a brown-yellow background, black characters, and black borders, allowing for intercity travel (non-local temporary license plate). 2. Before the official license plate is issued, only the temporary license plate should be used. Once the official license plate has been issued, even if the temporary license plate is still within its validity period, it cannot be used anymore. If discovered by traffic police, corresponding penalties will be imposed.
16
4
Share

Where is the cabin air filter located in the Beidou Star?

The Beidou Star does not come with a cabin air filter, but it has a reserved space for installing one. The specific location is inside the glove compartment on the passenger side. Taking the 2016 Beidou Star X5 as an example, it is classified as a micro car with the following dimensions: length 3664mm, width 1610mm, height 1722mm, and a wheelbase of 2485mm. It has a fuel tank capacity of 42 liters and a curb weight of 940kg. The 2016 Beidou Star X5 features a MacPherson strut front suspension and a single longitudinal swing arm non-independent rear suspension. It is powered by a 1.4L naturally aspirated engine, delivering a maximum horsepower of 97PS, a maximum power of 71kW, and a maximum torque of 120Nm, paired with a 5-speed manual transmission.
20
5
Share

Where is the VIN code located on the car?

The VIN code is located under the front windshield of the car. The VIN (Vehicle Identification Number) is a code that identifies the manufacturer, engine, chassis number, and performance of the vehicle. The VIN consists of 17 alphanumeric characters, and its meaning varies depending on the country or manufacturer. The functions of the VIN are: 1. Helps in recording vehicle information; 2. Assists in recording changes of vehicle ownership; 3. Anti-theft. The meanings of the VIN digits are: 1. Positions 1-3 represent the World Manufacturer Identifier; 2. Positions 4-8 are the vehicle descriptor section; 3. Position 9 is the check digit; 4. Positions 10-17 are the vehicle identifier section.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.