How to Deal with Scratches on Your Car by Yourself?

What is the highway vehicle rescue phone number?

Highway rescue phone number is 12122. Additional information: Precautions for driving on highways include: 1. Both the driver and front-seat passenger should fasten their seat belts, and the driver should not use a mobile phone; 2. Avoid sudden steering wheel movements while driving at high speeds; 3. Do not change lanes arbitrarily while driving. When changing lanes or overtaking the vehicle ahead, the turn signal must be activated in advance; 4. Only adjacent lanes can be used for overtaking, and the vehicle must return to the driving lane immediately after overtaking. Vehicles must not straddle or ride on lane dividers; 5. Do not reverse, drive in the wrong direction, make U-turns or turns across the central divider, conduct test drives or drive training vehicles, or overtake or park on ramps; 6. Maintain a following distance of at least 100 meters. When the speed is below 100 km/h, the distance from the vehicle ahead in the same lane can be appropriately reduced, but the minimum distance should not be less than 50 meters.

14

2

Share

What is the reason why the car cannot move after shifting gears?

Reasons why the car cannot move after shifting gears: Leakage in the automatic transmission oil pan, causing all hydraulic oil to leak out; The linkage or cable between the control handle and the manual valve rocker arm is loose, keeping the manual valve in the neutral or parking position; The oil pump inlet filter screen is clogged; Severe leakage in the main oil circuit; The oil pump is damaged. Here is additional information: 1. The car not moving after shifting gears is a comprehensive functional fault: (1) It involves the clutch, transmission, and drive axle. When diagnosing, the fault location should be determined first, and the condition of both wheels can be checked initially. (2) The diagnostic sequence generally starts from the drive wheels, moving forward through the rear axle to the drive shaft, then to the transmission, and finally to the clutch. If the drive shaft rotates but the car does not move forward, the fault lies in the rear axle. (3) Lift the rear axle and rotate one rear wheel. If the other rear wheel rotates in the opposite direction but the drive shaft does not rotate, it indicates that all rivets of the driven bevel gear are sheared off; If the other rear wheel does not rotate, check if the half-shaft is broken. 2. If the car does not move when starting in a certain gear and the drive shaft does not rotate, the fault is in the transmission: (1) Remove the transmission cover and inspect whether the transmission shift fork is broken or if the guide block fixing screws are loose. If the above checks are normal, proceed with the gear shifting test. (2) If the second shaft does not rotate in a certain gear, it means the half-round key of that gear is sheared off; If the second shaft rotates in direct drive but does not rotate in other gears, it indicates that the support bearings at both ends of the intermediate shaft are disassembled, causing the intermediate shaft to drop. (3) If the drive shaft does not rotate in any gear, the fault lies in the clutch. Check whether the clutch is severely slipping, whether all rivets of the driven disc spline hub and steel plate are sheared off, or whether the steel plate is broken.

8

5

Share

What was the brand of China's first car?

Minsheng Model 75 truck. It was born on May 31, 1931. The following is relevant content introduction: 1. Introduction: The first domestically produced car in China - the Minsheng Model 75 truck. 2. Background: To celebrate the birth of the first domestically produced car, the Liaoning Mortar Factory held a grand celebration. The truck had a load capacity of 1.82 tons, was long-nosed and brown, equipped with a six-cylinder water-cooled gasoline engine with 65 horsepower, a wheelbase of 4.7 meters, single tires on all four wheels, and a top speed of 40 kilometers per hour. 3. Features: The self-designed buffer rear axle also had its own characteristics. The radiator was divided into four parts, so even if one part was damaged, the car could still run normally. Except for the engine, rear axle, electrical equipment, tires, and other parts that used original components, the factory redesigned and manufactured all other parts.

18

3

Share

What is the fuel consumption of the Mercedes-Benz C260?

The combined fuel consumption of the Mercedes-Benz C260 is 6L-6.9L. The Mercedes-Benz C260 is a mid-size car launched by Mercedes-Benz, positioned above the Mercedes-Benz A-Class sedan. The specific details are as follows: 1. Power: The Mercedes-Benz C260 is equipped with a 1.5T turbocharged engine, which delivers a maximum power of 135kW and a maximum torque of 280 Nm. 2. Transmission: It is paired with a 9-speed automatic transmission. Notably, this model also features a 48V mild hybrid system, which can recover excess power generated by the car and provide additional power. Compared to other models in the same class, the Mercedes-Benz C260 has excellent fuel efficiency. The powertrain system used in the C260 not only delivers strong performance but also improves the engine's fuel economy, helping to save fuel to a certain extent.

16

0

Share

How to Check Vehicle Maintenance Records?

Vehicle maintenance records can be checked for free at 4S stores, as every maintenance service is archived in their computer systems. Details are as follows: 1. In-store Archives: Vehicle maintenance records mainly refer to those kept by 4S stores. From the moment a brand-new car is delivered to a customer, every service item and detail performed at the 4S store will be archived. 2. Checking Used Cars: To check maintenance records of a used car, you can directly visit a 4S store and ask a trusted salesperson to assist with the inquiry. The advantage is that the query is relatively inexpensive or even free, while the disadvantage is that the 4S store query results may appear complex, making it somewhat challenging for owners who are less familiar with automotive parameters to understand.

1

0

Share

How Often Should the Volkswagen Tharu Be Maintained?

The Volkswagen Tharu model is equipped with two turbocharged engines: 1.4T and 2.0T. For routine maintenance, the minimum requirement is to use semi-synthetic engine oil, but it is recommended to opt for full-synthetic oil for better overall quality. When using full-synthetic oil, routine maintenance can be performed once a year or every 10,000 kilometers. The five key points for engine maintenance are as follows: 1. Use the appropriate grade of engine oil and replace the oil and filter regularly (every 5,000 kilometers); 2. Frequently maintain the air filter and replace it periodically (every 20,000 kilometers); 3. Clean the fuel system regularly and replace the fuel filter periodically (every 30,000 kilometers); 4. Perform regular maintenance on the radiator (every 30,000 kilometers); 5. Replace the spark plugs periodically (every 40,000 kilometers or based on driving conditions).

18

1

Share

How to Deal with Scratches on Your Car by Yourself?

What is the highway vehicle rescue phone number?

What is the reason why the car cannot move after shifting gears?

What was the brand of China's first car?

What is the fuel consumption of the Mercedes-Benz C260?

How to Check Vehicle Maintenance Records?

How Often Should the Volkswagen Tharu Be Maintained?

What is the Scrap Age Limit for Used Cars?

How to start the air conditioning in Qoros 5?

What does rest mean in a car?

How Many Years Can You Take the Driver's License Test?