How to Deal with Scratches on Helmet Visors?

Can the Titan Star monitor when the car is parked and turned off?

Titan Star can monitor when the car is parked and turned off. Here is some extended information about dash cams: How to turn off the dash cam: Generally, the dash cam will start up and run when the vehicle is started, and it will automatically shut down when the vehicle is parked and turned off. You can also press the power button to turn it off directly. About parking monitoring: Dash cams with parking monitoring usually draw power directly from the ACC fuse box via a step-down cable. When the vehicle is parked and turned off, the dash cam will automatically shut down (more accurately, it enters a low-power sleep mode). However, once it detects that the vehicle has been impacted or there is movement in front of it, it will immediately activate the parking monitoring function and record the surrounding footage.

11

3

Share

How to Check Tire Pressure on a Jeep Compass

To check the tire pressure on a Jeep Compass, simply view the tire pressure monitoring display on the instrument cluster. The tire pressure monitoring system automatically monitors tire pressure in real-time while driving and alerts the driver in case of tire leaks or low pressure to ensure driving safety. There are three common types of tire pressure monitoring systems: Direct TPMS: Direct tire pressure monitoring systems use pressure sensors installed in each tire to directly measure air pressure. Wireless transmitters send pressure data from inside the tires to a central receiver module, which then displays the pressure readings for each tire. The system automatically alerts the driver when tire pressure is too low or if there's a leak. Indirect TPMS: When a tire's pressure decreases, the vehicle's weight causes that wheel's rolling radius to become smaller, making it rotate faster than other wheels. By comparing rotational speed differences between tires, the system monitors pressure. Indirect systems essentially monitor pressure by calculating changes in tire rolling radius. Tire Pressure Monitoring System (TPMS): This combines the advantages of both systems above. It installs direct sensors in two diagonally opposite tires while using a 4-wheel indirect system. Compared to full direct systems, this hybrid approach reduces costs while overcoming the indirect system's inability to detect simultaneous underinflation in multiple tires. However, it still cannot provide real-time actual pressure data for all four tires like a full direct system.

3

2

Share

Is it still necessary to display the annual inspection sticker now?

Now, it is not required to display the annual inspection sticker. Here are the relevant details about vehicle annual inspection: Inspection Reform: Now, the vehicle inspection information is interconnected online. When traffic police conduct roadside checks, they can use PDAs to access the vehicle monitoring system. If an approaching vehicle has not undergone the annual inspection, the system will provide an early warning, eliminating the need for police to visually verify the inspection information. Changes in Annual Inspection: Currently, there is no need to obtain a paper annual inspection sticker, meaning it does not have to be affixed to the vehicle's front windshield. However, it is important to note that vehicle owners must apply for an electronic inspection qualification mark every two years. Since the paper annual inspection sticker has been replaced by the electronic inspection qualification mark, vehicles that pass the regular inspection will still receive a paper annual inspection sticker from the inspection institution. Additionally, the electronic mark can be viewed on a mobile phone, and the display of the paper sticker is optional.

1

Share

What is the maximum charging current for a car battery?

The charging current for a car battery is related to its capacity, and a current of 6A can be used for charging. Charging time for the battery: If the battery is completely drained, it typically takes about 8 to 10 hours to charge. If a lower current is used for charging, it may take around 12 hours to fully charge. However, it's important to note that it's best not to wait until the battery is completely dead before charging. It is recommended to charge when the battery still has about 70% of its capacity remaining, in which case it only takes 6 to 8 hours to fully charge. If the battery voltage is too low, the car may have difficulty starting or may not start at all. Conversely, if the battery voltage is excessively high, it may damage the battery. Regularly check the battery voltage. If the voltage is below 11.8V, it indicates insufficient voltage, and you should turn off electrical devices and start the car to charge the battery. If the voltage drops below 10.8V, it means the battery is severely depleted, and a battery charger should be used for charging.

13

0

Share

What is the content of the motorcycle charger wiring tutorial?

Motorcycle charger wiring tutorial: Wiring: Attach the two metal clips from the charger output to the battery terminals. The red clip is the positive terminal and should be attached to the positive terminal of the battery. The black (or sometimes green or blue) clip is the negative terminal and should be attached to the negative terminal of the battery. Remove all the caps from the battery to prevent the buildup of gas bubbles during charging, which could cause the battery case to burst. Voltage adjustment: Set the charger output voltage to match the rated voltage of the battery. Most motorcycle batteries are 12 volts, but some are 6 volts. Power connection: Set the charging level to zero and then connect the charger to the power source. Increasing the charging level: Gradually increase the charging level based on the desired charging speed. The lowest level charges the slowest but provides the most complete charge. Power disconnection: When charging is complete, bubbles will form in the battery acid, indicating that the battery is fully charged. Return the charging level to zero, disconnect the charger from the power source, and remove the metal clips.

8

2

Share

How Many Tons is the Cummins 3.8 Suitable for Pulling?

Cummins 3.8 is suitable for pulling loads of around 10 tons. The optimal range is between 9 to 10 tons, and it should not exceed 11 tons. If it exceeds 11 tons, it may feel like a small horse pulling a heavy cart. The same engine model installed in different vehicles may have different manufacturer calibrations, which mainly refer to the engine's intake and exhaust, ignition timing advance, and fuel injection timing. Below is an introduction to the Cummins 3.8 engine: 1. Horsepower: The Cummins 3.8 has a horsepower of 154 PS. Horsepower is a unit of power, measuring how quickly work is done. Since it relates to the speed of work, the vehicle's top speed is determined by maximum horsepower, while torque determines whether the vehicle can pull heavy loads. 2. Output Power: The engine's horsepower refers to its output capacity (work done), i.e., output power. Output power is the most important parameter for measuring vehicle performance and is used to evaluate engine performance.

12

5

Share

How to Deal with Scratches on Helmet Visors?

Can the Titan Star monitor when the car is parked and turned off?

How to Check Tire Pressure on a Jeep Compass

Is it still necessary to display the annual inspection sticker now?

What is the maximum charging current for a car battery?

What is the content of the motorcycle charger wiring tutorial?

How Many Tons is the Cummins 3.8 Suitable for Pulling?

Differences Between Lynk & Co 02 Yao and Jin?

How Often Should the Fuel Filter Be Replaced and at What Mileage?

How to enable internet on Roewe RX5?

How to turn on Bluetooth in the base model of Fengjun 5?