How to Deal with Scratches on Car Headlight Glass?

2 Answers
SanAllie
08/26/25 3:38am
Car headlight glass scratches can be treated by: 1. Toothpaste Polishing: Toothpaste contains abrasive particles. Apply toothpaste to the headlight, then use a clean towel to polish in circular motions before rinsing with water; 2. Polishing Repair: Clean dust and dirt from the headlight surface, sand with water sandpaper, remove the powder after sanding, and use a towel dipped in polishing wax to polish in circular motions. Car headlights consist of the headlight assembly, onboard computer, and light sensor, characterized by low power consumption, high brightness, and long service life. The functions of car headlights are: 1. Accurately illuminate the road ahead; 2. Improve safety during night driving; 3. Avoid affecting the vision of oncoming drivers.
Was this review help?
18
4
Share
LaylaMarie
09/08/25 4:21am
As a DIY car maintenance enthusiast, I find dealing with headlight lens scratches quite straightforward. For minor scratches, toothpaste or specialized polishing paste works well—first clean the headlight surface, apply a small amount of toothpaste, and gently rub in circular motions with a soft cloth or sponge for a few minutes before rinsing with water. Repeat this process a few times, and the scratches will gradually fade. For deeper scratches, I recommend purchasing a professional repair kit, which costs just a few dozen yuan and includes various grits of sandpaper and polishing compounds—just follow the instructions step by step. Be careful not to over-polish to avoid damaging the plastic lens. After repair, the headlight will regain clarity, improving nighttime driving safety. When washing your car, use mild soapy water and avoid stiff brushes to prevent new scratches. DIY not only saves money but also teaches useful skills—it's definitely worth trying.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

How to Auto-Fold the Enclave's Rearview Mirrors?

The methods to auto-fold the Enclave's rearview mirrors are as follows: 1. Use the manual switch control located on the driver's side door; 2. The switch is next to the rearview mirror adjustment button, and activating it will automatically fold the mirrors. More information about the Enclave includes: 1. The rearview mirrors can also be controlled via the car key. After parking, locking the car with the key will automatically fold the mirrors. 2. The Enclave is a mid-to-large SUV launched by Buick, with dimensions of 4981mm in length, 1953mm in width, 1727mm in height, and a wheelbase of 2863mm. 3. The Enclave is equipped with a 2.0-liter turbocharged engine, delivering a maximum power of 237 horsepower and a maximum torque of 350 Nm.
11
2
Share

Where is the front motor number of the engine located?

The engine number of a car is located on the engine block and can also be found on the vehicle registration certificate. Relevant information about the engine number: The engine model is marked by the manufacturer according to relevant regulations or industry practices to indicate engine-related information. The most accurate name for the engine number is the Vehicle Identification Number (VIN), which consists of 17 digits and letters and is used to effectively identify the vehicle. Composition of the model: The prefix includes the product series code, generation symbol, and regional or enterprise code, which are selected by the manufacturer as needed with corresponding letters, subject to approval and filing by the industry standard authority. The middle part consists of symbols for the number of cylinders, cylinder arrangement type, stroke, and cylinder diameter. The suffix consists of symbols for structural features and usage characteristics.
10
0
Share

What are the symptoms of camshaft noise in the EA888 engine?

The symptom of camshaft noise in the EA888 engine is the sound produced between the camshaft bearings and the shaft during engine operation. It is a rhythmic, dull metallic knocking sound, which is more noticeable when idling or at slightly higher idle speeds, especially when listening near each camshaft bearing. The camshaft is a component in a piston engine that rotates at high speeds and must withstand significant torque, thus requiring high strength and support. It is typically made of high-quality alloy steel or alloy steel. The following are the causes of camshaft noise: 1. Excessive clearance between the camshaft and its bushings. 2. Rotation of the camshaft bushings. 3. Bending or deformation of the camshaft. 4. Excessive axial clearance of the camshaft. 5. Burning or detachment of the camshaft bushing alloy.
20
2
Share

How to Defrost Car Windows in Winter?

Here are the methods to defrost car windows in winter: 1. Use the car heater to defrost. Using the heater is the most ideal method. Before setting off, start the car and let the engine warm up while turning on the heater. When the engine coolant reaches the right temperature, direct the warm air from the car's air conditioning system toward the windshield to melt the frost by raising its temperature. 2. Manual defrosting method. First, warm up the car, then enter the vehicle, turn on the heater, set it to blow air toward the front windshield, and activate the rear window defroster. The frost should disappear within a few minutes. 3. Use a spray de-icer. Apply this type of de-icing spray to the inner surface of the car windows and wipe it clean. This not only removes dirt from the glass but also forms a thin, transparent protective film on the surface.
6
5
Share

Does a Nail Puncture on the Tire Tread Require Replacement?

Whether a tire needs to be replaced after a nail puncture on the tread: 1. Check if it's punctured: Pour some water on the area where the nail is embedded and observe if there is any air leakage. If no bubbles appear, it means the nail hasn't fully penetrated the tire. If it has, there will definitely be air leakage because the nail cannot seal the hole. 2. If not fully penetrated: To prevent the nail from going deeper, you can use a screwdriver or car key to pry it out. 3. After removing the nail: Pour water on the punctured area again to check for air leakage. If there's no leakage, no special treatment is needed, and you can continue using the tire normally.
13
2
Share

How to Test if an ABS Sensor is Good or Bad?

ABS sensor testing methods are: 1. Use a fault diagnostic tool to read the fault codes. If there is an issue with the sensor, the ABS computer will display a fault code, and the warning light on the dashboard will illuminate; 2. Measure the resistance of the ABS sensor with a multimeter. The resistance should be between 1000 and 1300 ohms. If it falls outside this range, it indicates a problem with the ABS sensor. Additional information: ABS sensors are used in automotive ABS systems to monitor vehicle speed. The ABS sensor interacts with a toothed ring that rotates synchronously with the wheel, generating a set of quasi-sinusoidal AC signals whose frequency and amplitude are related to wheel speed. This output signal is transmitted to the ABS electronic control unit (ECU) to enable real-time monitoring of wheel speed.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.