···
Log in / Register

How to Deal with Scratches on Car Center Console?

3 Answers
LaHolden
09/09/25 3:24am
Touch-up paint pens can effectively cover scratches, but be mindful of the application pressure and ensure even coverage. Using polishing compounds can effectively remove scratches on the center console; just apply with even pressure. Remove the panel from the center console and repaint it for a complete fix.
Was this review help?
20
5
Share
McAlexander
09/20/25 8:13am
Scratches on the center console are really annoying, and I've experienced it several times. For light scratches, you can use toothpaste: first clean the area, squeeze some toothpaste onto a soft cloth, and gently rub in circles for a few minutes. You'll see the scratches fade a bit. For deep scratches, it's much more complicated—you'll need professional scratch remover or take it to a car detailing shop for polishing, which works better but costs more. Be careful not to place keys or phones there to avoid friction. Remind the car wash staff to use a soft cloth. Prevention is key—applying a protective film is a good idea. Knowing these little tricks after driving for a while is really helpful. Checking the overall wear on the center console is crucial, and regular maintenance can extend its lifespan.
Was this review help?
17
1
Share
Expand All
SanClara
11/03/25 8:36am
When I first bought my car, there was a scratch on the center console, and I was really upset. I tried applying some olive oil from home, rubbed it with a cloth for a while, and surprisingly, it worked! Later, I got smarter and bought an online repair kit for just a few bucks, which did the trick. The steps are quite simple: clean the scratched area, apply the repair solution, and keep rubbing in circles until the scratch disappears. For deep scratches, don’t force it—ask a professional at a small shop for help. Don’t overlook daily habits when it comes to car maintenance; placing a mat on the console can prevent scratches. Driving is a joy in life, so don’t let small issues bother you too much. Regular car checks can save you a lot of trouble.
Was this review help?
20
3
Share
Expand All
More Forum Discussions

Where is the installation position of the car's small round mirror?

The installation position of the car's small round mirror is divided into two situations: the left small round mirror is installed in the upper left corner of the side mirror, and the right one can be installed in the lower left corner. It is recommended to install the small round mirror on the left rearview mirror in the upper left corner, which not only allows a clear view of the rear wheel but also does not affect the rear view. However, the small round mirror on the right rearview should not be installed in the upper right corner, as it greatly interferes with the field of vision. It is recommended to install the right small round mirror in the lower left corner, which will be very helpful for parking. When the driver sits in the cab, they generally cannot see the side and rear of the car body. After installing the small round mirror, the driver's viewing angle can be increased, allowing them to see the rear wheels when reversing. When parking, it can also help determine the exact position of the rear of the car.
6
0
Share

Is Not Wearing a Seat Belt Captured Manually or Automatically?

Drivers not wearing seat belts are automatically captured by electronic surveillance. Electronic surveillance uses induction lines for capture: Electronic surveillance employs induction lines to detect the pressure from vehicles on the road. The signals are collected by sensors and sent to the central processor, where they are temporarily stored in registers (this data is valid within one red light cycle). If two pulse signals are generated simultaneously within the same time interval (red light cycle), they are considered valid. Capture via induction coils: Older red-light running capture devices, typically located at major intersections in urban areas, consist of several cameras with induction coils embedded in the ground. When a vehicle runs a red light, the device automatically captures the traffic violation and imposes penalties. However, these devices can only capture red-light running violations and do not capture other traffic violations such as crossing prohibited markings, driving in the wrong direction, or not driving in the correct lane.
3
4
Share

Why Does the Drive Shaft Make Abnormal Noises?

Reasons for abnormal noises from the drive shaft: 1. The drive shaft is bent or dented, causing imbalance during operation, leading to wobbling and noise; 2. Improper installation of the drive shaft, where the universal joint forks at both ends are not aligned on the same plane, or the original balance weights are not reinstalled in their original positions, disrupting the balance and causing noise and vibration; 3. Loose connecting bolts of the universal joint coupling; 4. Loose fixing bolts of the drive shaft intermediate support. Fault diagnosis and troubleshooting method: Lift the rear wheels of the vehicle, start the engine, engage a high gear, and observe the wobbling of the drive shaft. If the wobbling is most severe when the speed decreases, it indicates wobbling and noise caused by imbalance in the drive shaft; otherwise, the noise is caused by looseness. If the noise is not severe, the vehicle can be driven back for repair; if severe, immediate parking and repair are required.
7
2
Share

Why does the Toyota Alphard not have the Toyota logo?

Toyota Alphard does not have the Toyota logo because: This vehicle is an imported model, and many imported Toyota models do not have the Toyota logo on the front, only the rear logo is the Toyota emblem. Taking the Alphard as an example, it is a luxury MPV produced by Toyota, with a body length, width, and height of 4975mm, 1850mm, and 1945mm respectively, and a wheelbase of 2300mm. The front suspension of the vehicle is a MacPherson independent suspension, and the rear suspension is a double-wishbone independent suspension. The Toyota Alphard comes with two engine options: a 2.5-liter hybrid system and a 3.5-liter naturally aspirated engine. In the 2.5-liter hybrid system, the engine has a maximum horsepower of 117 hp, and the electric motor has a maximum horsepower of 211 hp; the 3.5-liter naturally aspirated version has a maximum horsepower of 301 hp.
11
5
Share

Does the Mercedes-Benz A180 come with a rearview camera?

The Mercedes-Benz A180 does not come standard with a rearview camera, but it can be installed later if needed. Advantages of a rearview camera compared to parking sensors: Easy installation. Generally, a standard single-output rearview camera only requires connecting the positive power wire to the positive terminal of the car's reverse light power and the negative power wire to the negative terminal of the reverse light or ground (GND). Routing the wires can be easily figured out based on the car model, and the camera can be installed by drilling a hole in a convenient location. Clear visibility—once the car is put into reverse gear, the real-time image of the rear is clearly displayed, making it easier for the driver to judge. Disadvantages of a rearview camera compared to parking sensors: Proactivity. When reversing, the driver must first observe the display screen to understand the situation. In contrast, parking sensors can alert the driver with an audible warning if an obstacle is detected on the right side while the driver is looking left, such as "Danger on the left."
5
4
Share

How many liters of engine oil does the Volkswagen Lavida require?

The Volkswagen Lavida requires 4 liters of engine oil. Method for changing engine oil: Loosen the nut at the bottom of the transmission oil pan and allow the old transmission oil to drain naturally by gravity; connect the transmission and the circulation machine through pipeline interfaces, and the new transmission oil will push out the old transmission oil under pressure; remove the oil pan to change the oil. Methods to determine whether the engine oil needs to be changed: Pull out the oil dipstick and smell it closely. If there is a strong sour odor, it indicates that the oil has deteriorated and should be changed; rub the old oil between your thumb and forefinger repeatedly. If you feel impurities, poor viscosity, or even a rough texture, it should be changed; hold the oil dipstick at a 45-degree angle under light and observe the oil droplets. If you can clearly see no wear particles in the droplets, it is in good condition. If there are many wear particles, it should be changed.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.