How to Deal with Rusty Tires?

1 Answers
VanHeidi
07/30/25 2:25am
First, rinse the steel rim of the tire with clean water to remove any dirt. Then, evenly spray rust remover onto the rust spots, using an appropriate amount. Wait for some time, then repeatedly scrub the surface of the steel rim with a sponge. The rust spots attached to it will disappear. Finally, rinse it again with clean water.
Was this review help?
14
0
Share
More Forum Discussions

What is the principle of the ancient south-pointing chariot?

The principle of the ancient south-pointing chariot involves two wheels. When the chariot turns, the rotation speeds of the two wheels differ. This speed difference drives the small figure to turn through a differential gear mechanism. Input system: The input system of the south-pointing chariot consists of the left and right wheels. When moving straight, both wheels rotate at the same speed; when turning, the rotation speeds of the left and right wheels differ, causing the chariot body to rotate. The south-pointing chariot is designed to counteract this rotation and keep the wooden figure pointing in a fixed direction. Transmission system: In the differential gear-based south-pointing chariot, the transmission system is a two-degree-of-freedom gear system, with the two inputs being the left and right wheels. When the left and right wheels rotate at the same speed, the input sun gear remains stationary; when there is a speed difference between the left and right wheels, it drives the sun gear connected to the wooden figure to rotate. Feedback system: The chariot shaft, serving as the feedback component, is located at the center of the chariot. When the chariot turns left, the shaft moves left, engaging the gears. The left wheel drives the output gear, ultimately causing the wooden figure to turn right to maintain its fixed direction. The same principle applies when turning right. Output system: The output system of the south-pointing chariot is the component that serves as the directional indicator.
20
5
Share

The Correct Usage Method of Car Safety Hammer

Correct usage method of safety hammer: Take out the safety hammer from the car, then directly strike the four corners of the tempered glass. When slight cracking appears, it indicates that the internal stress distribution of the glass has been severely disrupted, leading to the instant formation of numerous spider-web cracks. At this point, just a few more strikes will shatter the glass. If the glass has a film, you need to exert force to kick it open, as the film has anti-shattering properties and won’t detach without sufficient external force. The car safety hammer, also known as a multifunctional safety hammer, is a tool installed in vehicles for breaking car windows to escape in emergencies or disasters. There are numerous brands of car safety hammers, with varying functions and styles. The hammer body can be made of plastic, wood, or steel, while the hammer head is always metal. Car safety hammers should only be used in emergencies, and safety precautions must be observed. When taking long-distance buses, it’s advisable to sit near the safety hammer, emergency door, or roof emergency exit. It’s also recommended to review the instructions for opening the emergency door beforehand. Private cars can also be equipped with safety hammers if necessary. If a private car is equipped with one, the hammer should be placed in an easily accessible location. In emergencies, the driver should aim for the center position, about two-thirds up from the bottom on either side, to ensure a quick escape.
12
1
Share

Is the Isuzu MU-X an imported vehicle?

The Isuzu MU-X is not an imported vehicle. It is a mid-size SUV launched by Jiangxi Isuzu. The Isuzu MU-X comes in two versions to choose from: a five-seater and a seven-seater. Additionally, this model boasts a wheelbase of 2845mm. In terms of powertrain, the Isuzu MU-X offers two engine options: a 1.9T turbocharged diesel engine and a 3.0T turbocharged diesel engine. The 1.9T diesel engine delivers a maximum power of 120kW and a maximum torque of 360Nm, while the 3.0T diesel engine produces a maximum power of 130kW and a maximum torque of 430Nm. The transmission system is paired with a 6-speed automatic transmission.
13
1
Share

How to Handle After a Class B Driver's License is Deducted 12 Points?

If a Class B driver's license is deducted 12 points at once, the driver must participate in study and examination, and apply for a downgrade and license replacement. The "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" stipulates: Article 68: If a motor vehicle driver accumulates 12 points in a scoring cycle, the traffic management department of the public security organ shall detain their motor vehicle driver's license. Article 78: For drivers holding a Class A (large bus), Class B (tractor), Class C (city bus), Class D (medium bus), or Class E (large truck) driver's license, the vehicle management office shall revoke their highest permitted driving qualification and notify the motor vehicle driver to apply for a downgrade and license replacement within 30 days under any of the following circumstances: (1) Being involved in a traffic accident resulting in death and bearing equal or greater responsibility, without constituting a crime; (2) Having a record of accumulating 12 points in a scoring cycle; (3) Failing to participate in the inspection for three consecutive scoring cycles. If the motor vehicle driver fails to apply for a downgrade and license replacement within the specified time, the vehicle management office shall announce the revocation of the permitted driving qualification as void. After applying for a downgrade and license replacement, if the motor vehicle driver wishes to apply for reinstatement of the revoked permitted driving qualification, they must have no record of accumulating 12 points in the current scoring cycle and the most recent scoring cycle before application, and must not have been involved in any traffic accident resulting in death with equal or greater responsibility.
3
5
Share

Where is the cabin air filter located in the Wuling Hongguang S?

The cabin air filter of the Wuling Hongguang S is located inside the glove box on the passenger side. The steps to replace the cabin air filter are: 1. Open the glove box on the passenger side and lift it upwards to remove it; 2. After exposing the cabin air filter, take out the plastic strip outside the filter; 3. Pull the white paper strip, and then the cabin air filter can be removed; 4. After replacing the cabin air filter, follow the reverse order of the disassembly steps to reinstall it properly. The body dimensions of the Wuling Hongguang S are 4400mm in length, 1680mm in width, and 1770mm in height, with a wheelbase of 2720mm.
8
1
Share

Is it okay to rain after a full car color change wrap?

There will be no impact if it rains after a full car color change wrap. Because the car wrap is usually applied to the inner side of the car, as long as the windows are not opened during rain, there will be no effect on the car. A car color change wrap is a service that covers and sticks a colorful and diverse film to the entire car, changing the appearance of the whole or part of the car. The car color change film mainly adheres to the car surface through polymer materials and is easy to remove. You can also wash the car after a full color change wrap, but it is best to do so after a week, which will have no impact on the wrap because all wraps have waterproof functions. However, it is best not to rush to wash the car or wet it with water in the early stages of the wrap. Manual washing is recommended, as this intensity will not affect the wrap's effectiveness. Generally, it is recommended to apply the wrap after rain or on cloudy days when there is less dust in the air and no sunlight, allowing the wrap to fit the car body better. However, before changing the color of the entire car, you need to report it to the vehicle management office and not change the color recklessly. The wrap will not dry immediately after application, so it is best not to wash the car or roll the windows up and down within a week to avoid any impact that may cause bubbles or poor adhesion of the wrap. After applying the car wrap, be sure to pay attention to subsequent maintenance.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.