How to Deal with Resonance and Gurgling Noise Caused by Timing Belt?

How to Disassemble an Automatic Transmission?

Automatic transmission disassembly steps are as follows: 1. Remove the throttle cable connected to the throttle lever of the automatic transmission, unplug all wiring harness connectors on the automatic transmission, and dismantle all components connected to the automatic transmission, such as the speedometer flexible shaft, hydraulic oil filler tube, radiator oil pipe, and the linkage between the control lever and the manual valve lever; 2. Remove the middle section of the exhaust pipe, and dismantle the protective covers and plates below the automatic transmission; 3. Loosen the connecting bolts between the drive shaft and the output shaft of the automatic transmission, and remove the drive shaft; 4. Remove the flywheel housing cover plate, use a screwdriver to pry the flywheel, and remove the connecting bolts between the flywheel and the torque converter one by one; 5. Remove the starter, dismantle the connecting bracket between the automatic transmission and the vehicle frame, support the automatic transmission with a jack, remove the connecting bolts between the automatic transmission and the flywheel housing, and lift off the torque converter and the automatic transmission together.

1

2

Share

What does a teapot symbol on the dashboard mean?

An icon of a teapot on the car dashboard indicates: the engine oil pressure warning light. Here are some details about the engine oil pressure warning light: 1. If the engine oil pressure warning light comes on, it means there is insufficient oil in the engine. You should find a safe place to stop and add engine oil to the car. If you don't have engine oil on hand, you can call for roadside assistance. 2. Once the engine oil pressure warning light is on, it is recommended that the owner not continue driving, as this can easily lead to engine seizure. 3. Additional information: Engine oil is often referred to as the 'blood' of the engine. Without engine oil, the engine cannot operate properly.

18

0

Share

What Insurance Should You Buy for a New Car?

For a new car, you should purchase compulsory traffic insurance, vehicle damage insurance, and no-deductible insurance. Here is more information about car insurance: 1. Introduction: Vehicle insurance, also known as motor vehicle insurance or simply car insurance, refers to a type of commercial insurance that covers liability for personal injury, death, or property damage caused by natural disasters or accidents involving motor vehicles. Car insurance is a form of property insurance and is relatively young in the field of property insurance, as it emerged and developed alongside the advent and popularization of automobiles. Unlike modern motor vehicle insurance, early car insurance primarily focused on third-party liability coverage and gradually expanded to include risks such as collision damage to the vehicle body. 2. Basic Functions: The fundamental functions of insurance, including organizing economic compensation and fulfilling insurance payouts, are also the basic functions of motor vehicle insurance.

12

2

Share

Which cities have implemented China VI emission standards?

Provinces and cities implementing China VI standards include: Hebei, Henan, Hainan, Chongqing, Anhui, Shaanxi, Sichuan, Chengdu, Hangzhou, Nanjing, Shandong, Shaanxi, etc. Below is relevant information about China VI standards: 1. Concept: The China VI motor vehicle pollutant emission standards (National Sixth Stage) were formulated to implement the "Environmental Protection Law of the People's Republic of China" and the "Air Pollution Prevention and Control Law of the People's Republic of China", aiming to control pollution from compression-ignition and gas-fueled ignition engine vehicle exhaust, protect the ecological environment, and safeguard human health. It consists of two parts: "Limits and Measurement Methods for Emissions from Light-duty Vehicles (China VI)" and "Limits and Measurement Methods for Emissions from Heavy-duty Diesel Vehicles (China VI)". 2. Proposed postponement: The suggestion to delay nationwide implementation of China VI standards mainly considers two factors: First, due to the pandemic impact, whether automakers can clear their existing inventory before the standards take effect; Second, the new China VI standards involve particulate matter emission limits, requiring new vehicles to undergo corresponding testing and validation. As work resumption hasn't fully normalized, appropriate delay could provide automakers more preparation time.

12

0

Share

How Many More Years Can a 2006 Passat Be Driven?

As long as it can pass the annual inspection and there are no restrictions on such older vehicles in your area, it can be driven indefinitely. Below is relevant information about the Passat's engines: 1. 1.8-liter turbocharged engine: The 1.8-liter turbocharged engine has a maximum power of 110 kW, a maximum torque of 210 Nm, a maximum power speed of 5700 rpm, and a maximum torque speed range of 1750 to 4600 rpm. This engine uses an aluminum cylinder head and an iron cylinder block. 2. 2.0-liter naturally aspirated engine: The 2.0-liter naturally aspirated engine has a maximum power of 85 kW, a maximum torque of 172 Nm, a maximum power speed of 5400 rpm, and a maximum torque speed of 3200 rpm. This engine uses an aluminum cylinder head and an iron cylinder block. 3. 2.8-liter naturally aspirated engine: The 2.8-liter naturally aspirated engine has a maximum power of 140 kW, a maximum torque of 260 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 3200 rpm. This engine uses an aluminum cylinder head and block.

6

5

Share

How to Close the Engine Hood of the Envision?

To close the engine hood of the Envision, simply press it down manually. Here are some details about the Envision: 1. Vehicle Dimensions: The Envision is a midsize SUV under the Buick brand, with a length/height/width of 4686/1839/1686 (1691) mm and a wheelbase of 2750 mm. 2. Powertrain: The Buick Envision offers a 2.0T-SIDI direct-injection turbocharged engine paired with a 9-speed HYDRA-MATIC intelligent transmission, and a 1.5T-SIDI direct-injection turbocharged engine paired with a 7-speed DCG-PLUS intelligent dual-clutch transmission. The former delivers a maximum power of 191 kW at 5500 rpm and a peak torque of 400 N·m between 3000-4000 rpm. The latter provides a maximum power of 124 kW at 5600 rpm and a peak torque of 250 N·m between 1700-4400 rpm.

4

1

Share

How to Deal with Resonance and Gurgling Noise Caused by Timing Belt?

How to Disassemble an Automatic Transmission?

What does a teapot symbol on the dashboard mean?

What Insurance Should You Buy for a New Car?

Which cities have implemented China VI emission standards?

How Many More Years Can a 2006 Passat Be Driven?

How to Close the Engine Hood of the Envision?

How to Check Wiper Blade Size?

What happens if a vehicle is low on engine oil?

How to Replace the Cabin Air Filter

What does 'climate' mean in a car?