···
Log in / Register

How to Deal with Rattling Noises from the Dashboard?

1 Answers
Lauren
09/08/25 6:40am
To resolve rattling noises from the dashboard, the problematic components should be replaced promptly. Specific explanations are as follows: 1. Plastic Components: Although rattling noises from the dashboard cannot be considered normal, they are a relatively common issue in many vehicle models. Such noises often occur in areas with many plastic parts, such as the instrument panel or door trim panels, and can be resolved by timely detection and replacement. 2. Friction Due to Squeezing: Friction noises caused by mutual squeezing usually vary with seasonal and environmental temperature changes. While these noises do not affect the vehicle's driving performance, it is necessary to disassemble and inspect the affected areas to check for poor assembly or loose components that may need re-tightening.
Was this review help?
16
0
Share
More Forum Discussions

Is Undercoating Necessary for Sedans?

Undercoating is necessary for sedans. The reasons for applying undercoating to sedans and the functions of a car's chassis are as follows: Reasons for applying undercoating to sedans: Undercoating is non-toxic, provides high coverage, and has strong adhesion. It can be sprayed on exposed areas such as the vehicle's undercarriage, wheel hubs, fuel tank, lower body panels, and trunk. After quick drying, it forms a durable elastic protective layer that prevents impacts from flying stones and gravel, avoids moisture, acid rain, and salt from corroding the metal parts of the undercarriage, prevents rust and corrosion, and ensures the safety of the driver. Functions of a car's chassis: The car chassis consists of four parts: the transmission system, running gear, steering system, and braking system. The chassis supports and mounts the car engine and its components, forms the overall shape of the car, receives the engine's power to enable movement, and ensures normal driving.
8
3
Share

How to Drive the Chery Ant?

Here are the steps to drive the Chery Ant:1. Fasten the seat belt, shift the gear, step on the brake, and turn the key clockwise to the start position until all self-check lights on the dashboard illuminate; 2. Wait for 5 seconds until all self-check lights turn off, continue turning the key clockwise to the end and release it. Confirm that the READY light is on, indicating the vehicle has started; 3. Check the remaining range; 4. Switch to D gear, release the handbrake, and start by releasing the brake. Here is some extended information about the Chery Ant:1. The 2019 Chery Ant eQ1 under Chery New Energy officially went on sale on June 28. 2. In terms of appearance, the new car is quite small and cute, with vertical daytime running lights in the fog light area at the front, paired with the design of the front air intake grille, giving the car a high recognition; 3. In terms of interior, it continues the current design style, with a black and orange color scheme; 4. In terms of power, the 2019 new model still adopts a permanent magnet synchronous drive motor with a maximum power of 41 horsepower (30 kW) and a maximum torque of 120 N·m.
16
0
Share

Does Ethanol Gasoline Harm Cars?

Ethanol gasoline has significant corrosive effects on the engine block and exhaust pipes of a car. Since the heat value of ethanol is only 61% that of gasoline, it produces less energy, resulting in higher fuel consumption. After combustion, ethanol produces acetic acid, which can severely corrode the entire fuel system, leading to premature vehicle scrapping. If the car has been used for a long time, it may contaminate the engine oil by entering the engine interior, causing very serious consequences. Additionally, because ethanol is soluble in water, ethanol gasoline can mix with accumulated water at the bottom of the fuel tank and then enter the engine for combustion, which can also damage the engine. If a car uses ethanol gasoline for an extended period, it can also cause slight corrosion, swelling, softening, and cracking of the engine's rubber seals and other non-metallic materials, leading to phenomena such as oil burning and blue smoke emissions from the engine.
20
0
Share

How long should you avoid rolling down windows after car window tinting?

Do not roll down the windows within one week after car window tinting. Post-tinting precautions and the advantages of window tinting are detailed below: Post-tinting precautions: Park the car in a sunny location to facilitate moisture evaporation from the film. Avoid washing the car for three days to prevent water from entering the film and causing detachment. Advantages of window tinting: Heat insulation and sun protection: The film effectively blocks a significant amount of heat generated by infrared rays. UV protection: Medium and long-wave ultraviolet rays can penetrate thick glass, but window tinting can block most UV rays, preventing skin damage and reducing interior aging. Safety and explosion-proof: The film's base layer is made of polyester, offering excellent tear resistance and penetration prevention. Combined with the adhesive layer, the film enhances glass strength to prevent injuries from accidental glass breakage. Reduced air conditioning energy consumption: Window tinting compensates for air conditioning cooling loss, quickly lowering interior temperature and achieving fuel savings. Enhanced aesthetics: Tinting allows for personalized vehicle styling. Anti-glare: Reduces accidents caused by glare factors.
19
1
Share

What is the actual fuel consumption of the Lingpai 1.8?

The Lingpai 1.8 has a fuel consumption of 6.3L per 100 kilometers, which is the official data. The fuel tank capacity of the Lingpai 1.8 is 47L, and the distance it can travel on a full tank is 47/6.3*100=746km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. The specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline to burn and perform work. Cars with greater weight also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block temperature is low, the gasoline injected during a cold start does not atomize easily, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
12
0
Share

How Long Does It Take to Get a Car Back After Painting?

If it's a large area of painting, it usually takes 2 to 3 days to get the car back. If the painted area is very small, it can usually be picked up after one day. Vehicle painting process: Cleaning, identification, evaluation, and masking; masking and degreasing; removal of old paint; application of putty; sanding putty and old coating; degreasing and masking; application of primer; sanding the intermediate primer. Purpose of vehicle painting: Cars are widely used, have a broad range of activities, and operate in complex environments. They are often exposed to moisture, microorganisms, ultraviolet rays, and other acidic or alkaline gases and liquids, sometimes suffering from wear or scratches that cause damage. Applying paint to their surfaces can protect the car from damage and extend its service life.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.