···
Log in / Register

How to Deal with Poor Sound Insulation in the Vezel?

6Answers
TessaFitz
08/28/2025, 01:32:34 AM

The Vezel has poor sound insulation, and the usual solution is to perform a full-vehicle sound insulation project, which is the method adopted by most people. Although the noise from the outside may still sound the same, the interior of the cabin becomes much quieter. Vehicle sound insulation is generally suitable for lower-configuration, less comfortable, or more budget-friendly cars. Here is additional information: 1. Soundproofing Sealing Strips: If the car's sound insulation system is relatively outdated, you can opt for a comprehensive upgrade of the sound insulation level. Soundproofing sealing strips are a useful device for sound insulation. If used properly, they can significantly reduce sound leakage. If the sealing strips tightly wrap around the door, they can immediately reduce noise. 2. Loud Engine Noise: If the engine noise is loud, check if the engine hood is equipped with sound insulation cotton. If not, you can purchase and install one yourself. If the original factory already has one, you can buy a better and thicker one to install. Another method is to add some sound insulation strips in the gaps between the engine hood and the car body to block noise. 3. Tire Noise: For tire noise, if the noise is loud, you can switch to quiet tires with good noise reduction effects. If the tires are too expensive, you can also add sound insulation cotton to the inner fender of the tires, which can also yield good results.

Was this review help?
115
Share
Andrew
09/09/2025, 11:56:19 PM

I've been driving the Vezel for a while now, and the noise insulation really isn't ideal, especially the wind and tire noise at high speeds. I tried some simple fixes at first, adding some soundproofing strips to the door edges – just a cheap sealing strip from Taobao for about ten yuan. Later, when that wasn't enough, I went to a professional shop to get wheel arch insulation done, using foam fillers, which cost over 500 yuan, and the noise reduction was noticeably better. For daily maintenance, I recommend first checking if the car's sealing strips are aged or cracked, as these are common sources of noise leaks. Also, when choosing tires, prioritize quiet ones like Michelin, which work really well. Remember, don't overlook these small modifications – they're easy to DIY and can save you a lot of money. In short, take it step by step with patience, and the noise insulation issue can be resolved.

Was this review help?
6
Share
Expand All
SanCamille
10/24/2025, 12:45:04 AM

As someone who enjoys tinkering with cars, I pay close attention to the noise insulation of the Vezel. The key lies in controlling noise sources—wind noise comes from gaps around doors and windows, so I recommend buying self-adhesive soundproofing tape to seal them. For road noise, soundproofing the chassis is crucial. I applied butyl rubber material myself using just a screwdriver and a scraper. It took me two hours and cost around 200 yuan. An extra tip: don’t overlook the engine bay—adding a soundproof cover makes a difference. The whole process is about DIY fun, but don’t rush. Tackle it section by section for steadier results, which are immediately noticeable. Safety-wise, avoid tampering with wiring; prioritize external modifications. Make it a habit to check before driving—it helps maintain quietness over time.

Was this review help?
1
Share
Expand All
JaydenRose
12/07/2025, 12:08:49 AM

Save money on improving the Honda Vezel's sound insulation. I've tried many methods and found the most economical is buying a set of soundproofing pads online for 50 yuan, just stick them inside the door panels; no need to spend big money right away. Also, aging sealing strips can be replaced for free—measure the gap width yourself and buy the same model at a repair shop. Driving slower daily reduces noise, or switching to quiet tires for about 400 yuan can significantly improve comfort. In short, start with simple DIY solutions first. Those handy with tools can even make their own soundproofing layer by filling wheel arches with old towels. Don't overcomplicate it—most noise issues can be effectively improved with these minor adjustments, offering good results economically.

Was this review help?
16
Share
Expand All
LeAsher
01/27/2026, 01:24:15 AM

Safety first when dealing with noise insulation issues. From personal experience, don't make random modifications when the Vezel's noise is loud: inferior materials may smoke. It's recommended to first check if the tire pressure is too high, then try professional soundproofing films installed by specialized shops, ensuring the materials have strong flame retardancy. I opted for a reputable brand's complete kit, with full sealing treatment for guaranteed safety. Additional advice: playing music to mask noise isn't a long-term solution—the foundation is reinforcing door seals. Pay special attention not to affect sensor positions, and test after modifications to ensure airbags aren't compromised. In short, for reliable results, consult professional technicians to safely enhance quietness.

Was this review help?
20
Share
Expand All
AugustAnn
04/22/2026, 11:32:17 PM

Preventive maintenance is a practical solution for poor sound insulation. In my daily driving of the Honda Vezel, I regularly check the door seals and chassis wear. After replacing the tires with quieter ones, the noise was reduced by 30%. I also added soundproofing cotton under the car floor, choosing non-toxic materials from Taobao and fixing them myself. In the long run, it's important to pay attention to the condition of the muffler during maintenance, as leaks can increase noise. It's advisable to apply sealing strips as a pre-treatment before highway driving. The overall approach is small investments for big returns, with phased upgrades being more stable—avoid doing too much at once.

Was this review help?
17
Share
Expand All
More Q&A

Where is the Cruze Battery Located?

The Cruze battery is located under the hood, with the battery model being 20-70/H6-70-L-T2-A, and a capacity of 80Ah. Below is an introduction to car batteries: 1. The battery is an essential part of a car, which can be divided into traditional lead-acid batteries and maintenance-free batteries. A battery is a device that converts chemical energy into electrical energy, belonging to the category of DC power sources. The designed lifespan of a battery is 27 months. 2. The structure of a car lead-acid battery mainly consists of positive (negative) plates, separators, electrolyte, case, connecting strips, and terminals.
103
Share

What is the positioning of the Haval H4 model?

The Haval H4 is positioned as a compact SUV. Below is a relevant introduction to the Haval H4: 1. In terms of power, it is all equipped with a 1.5-liter inline 4-cylinder turbocharged engine, paired with either a 6-speed manual or 7-speed dual-clutch transmission, delivering a maximum power of 110KW and a maximum torque of 210N.m. The maximum power speed ranges from 5600-6000rpm, and the maximum torque speed ranges from 1800-4400rpm. The fuel supply method is all direct injection. 2. In terms of configuration, the high-end Haval H4 models are equipped with practical features such as LED headlights, 360-degree surround view, 8 radar probes, a 12.3-inch full-color digital instrument panel, a 9-inch LCD display, a panoramic sunroof, a 6-way electrically adjustable driver's seat, and leather seats.
110
Share

How to Adjust the Time on a Civic Dashboard?

The method to adjust the time on a Civic dashboard is as follows: 1. Locate the 'CD/AUX' button (a small silver circle) on the car's center console panel, which has a CLOCK mark; 2. Press and hold that button until you hear a 'beep' sound, then you can start adjusting; 3. Use the radio's '1' and '2' buttons to adjust the hour and minute respectively; 4. After adjustment, press the CLOCK button again to confirm. Below is some relevant information about the Civic: 1. The 10th-generation Civic 1.0T is equipped with Honda's all-new 180Turbo engine, which can deliver a maximum power of 92kW and a peak torque of 173N·m. 2. The 0-100KM/h acceleration time for the 10th-generation Civic 1.5T CVT model is 7.95 seconds in actual tests. 3. The fuel consumption of the 10th-generation Civic 1.0T is only 5.0L/100KM.
102
Share

How to Reset the Maintenance Light on a Santana?

Santana maintenance light reset method is as follows: 1. First, turn off the ignition switch and stop the engine; 2. Press and hold the right button (reset/trip) on the instrument panel with your left hand; 3. While continuing to hold the right button with your left hand, turn on the ignition switch; 4. Keep holding the "reset/trip" button with your left hand until the maintenance light enters reset mode, then release the right button (reset/trip button); 5. Within 20 seconds of releasing the right button, press the left "menu button" once to confirm reset. Do not reset the maintenance display between service intervals to avoid incorrect display. The maintenance reminder function is only auxiliary, and detailed maintenance intervals should be followed according to the maintenance regulations.
116
Share

What are the differences between the second and third generations of Honda hybrid?

Honda hybrid third generation and second generation main differences are as follows: 1. Engine aspect: CRV uses the second generation i-MMD. The difference between the third generation i-MMD and the second generation is mainly the replacement of a more thermally efficient Atkinson cycle engine, increasing from 39% (maximum thermal efficiency) of the LFA11 to 40.6% of the LFB11. 2. Production location: The second generation was imported, while the third generation is domestically produced. 3. Fuel tank aspect: The third generation has a slightly larger fuel tank than the second generation. 4. Driving experience: The third generation offers better driving refinement compared to the second generation.
102
Share

How to Cancel the Wrench Icon on the 10th Generation Accord?

Methods to cancel the wrench icon on the 10th Generation Accord: 1. For models equipped with an information display. Set the power mode to ON and bring the vehicle to a complete stop; repeatedly press the "TRIP" button until the dashboard displays the engine oil life; hold the "TRIP" button for more than 10 seconds, the display will flash, indicating it is in reset mode, and the process is complete. 2. For models equipped with a driver information display. Set the power mode to ON; press the "HOME" button on the multi-function steering wheel; turn the left selector wheel to select the wrench icon, then choose to reset it.
108
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.