How to Deal with Paint Peeling Exposing Metal?

1 Answers
VonJanelle
07/29/25 5:49am
For small scratches without rust stains, you can simply clean the area and use a touch-up paint pen for self-repair. If rust stains appear, you can use ultra-fine water sandpaper dipped in water to sand in the same direction until the rust is removed. After wiping it clean, apply primer. Once the primer is dry, smooth it with water sandpaper and then use a touch-up paint pen for touch-up. Here is some additional information: 1. Touch-up paint pen: A touch-up paint pen is a must-have tool for beginners. If you don't have one temporarily, toothpaste can be used as a substitute. Toothpaste can reduce the appearance of scratches and provide some isolation to prevent rust. For minor scratches, it generally works fine, but this is only a temporary solution. 2. For larger scratches: In this case, professional repair at a 4S shop is needed. This usually involves repainting. If there are other small scratches on the car body that have been self-treated, they should also be repainted at the same time to avoid color discrepancies.
Was this review help?
10
0
Share
More Forum Discussions

What is the normal power generation capacity of a car generator?

The normal power generation capacity of a car generator is approximately 15 kilowatt-hours per hour. Here is an introduction to the generator: 1. Introduction: The car generator is the main power source of a vehicle. Its function is to supply power to all electrical equipment (except the starter) when the engine is running normally (above idle speed), while simultaneously charging the battery. 2. Principle: Based on the three-phase stator winding of a regular AC generator, the number of winding turns is increased, and terminals are added, along with an additional set of three-phase bridge rectifiers. At low speeds, the output is from the original winding and the additional winding in series, while at higher speeds, only the original three-phase winding provides the output. 3. Classification: Automobile generators can be divided into DC generators and AC generators. Since AC generators outperform DC generators in many aspects, DC generators have been phased out.
7
5
Share

Why is the car's brake pedal sometimes too hard to press?

The car's brake pedal sometimes being too hard to press is caused by a failure of the brake booster pump, and it is recommended to have it inspected and repaired. Below is an introduction to the handbrake: 1. Introduction: The professional term for the handbrake is auxiliary brake, which operates on a different principle from the main brake. It uses a steel cable connected to the rear brake shoes to apply braking force to the vehicle. 2. Configuration: The handbrake is used in conjunction with a return spring. When the handbrake is engaged, the spring is stretched; when the handbrake is released, the spring returns to its original length. With prolonged use, the spring may also deform. 3. Principle: For small cars, the handbrake is sometimes located behind the transmission, connected to the driveshaft with a brake disc, similar to a disc brake. The pulling force is transmitted via a steel cable to achieve parking braking.
16
1
Share

Where is the Tiguan spare tire located?

The Tiguan spare tire is located underneath the trunk compartment. It is concealed by a cover panel in the trunk, which needs to be removed to access the spare tire. After using the spare tire, it is recommended to replace it with a new tire as soon as possible, as the spare is intended only for temporary use in case of tire issues. The vehicle tool kit is also stored with the spare tire, including items such as a jack, wrench, and screwdriver. The Tiguan offers two powertrain options: 1. A 1.8T inline 4-cylinder turbocharged engine paired with a 6-speed automatic transmission; 2. A 1.4T inline 4-cylinder turbocharged engine paired with a 6-speed dual-clutch transmission. Both engines utilize direct fuel injection and feature front-wheel drive.
18
4
Share

Where is the fuel pump located on the Dongfeng Fengguang 330?

The fuel pump is located inside the fuel tank, which is positioned under the rear seats or the trunk of the vehicle. Here is an introduction to the Dongfeng Fengguang 330s: 1. Dimensions: The Dongfeng Fengguang 330 has a wheelbase of 2725mm. The interior features a home-style color scheme with a dark upper and light lower section, and the design exhibits a distinct German influence. 2. Configuration: The high-end version of the Fengguang 330 is equipped with a 7-inch LCD screen and includes features like a rearview camera and GPS navigation system. For safety, it comes with an EPS electronic power steering system and airbags. 3. Power: The Fengguang 330 is powered by a DK15 engine, known for its stronger power, lower fuel consumption, and longer lifespan. It delivers a maximum power of 85kW with a fuel consumption of 7.1L per 100 kilometers.
18
4
Share

Can motorcycles undergo annual inspection in a different location?

Motorcycles can undergo annual inspection in a different location. Below is the relevant introduction to out-of-area annual inspection: Main content: For motorcycles registered within 6 years, they will be exempt from inspection at inspection institutions to reduce the inspection burden on the public, especially vehicle owners in rural areas. The owner of the motor vehicle can apply for an inspection compliance mark at the vehicle management office of the registration location within three months before the expiration of the motor vehicle inspection validity period. Before applying, the owner of the motor vehicle must resolve all traffic safety violations and accidents related to the vehicle. Legal basis: Article 49 of the "Motor Vehicle Registration Regulations". The owner of the motor vehicle can apply for an inspection compliance mark at the vehicle management office of the registration location within three months before the expiration of the motor vehicle inspection validity period. Before applying, the owner of the motor vehicle must resolve all traffic safety violations and accidents related to the vehicle.
18
5
Share

What is the fuel consumption of the 3.5L Accord?

3.5L Accord has a fuel consumption of 6.4L/100km. The fuel consumption per 100 kilometers is a theoretical indicator value of the vehicle, which is measured by the manufacturer in an objective environment using a dynamometer installed on the vehicle chassis and converted into speed parameters. Generally, the vehicle's onboard computer will provide an average fuel consumption value displayed on the dashboard, but it often differs from the actual fuel consumption. Specific vehicle fuel consumption can be calculated using the formula: Fuel consumption per 100 km = Amount of fuel consumed ÷ Distance traveled × 100. Below is an introduction to the scientific principles of fuel consumption: 1. Road condition fuel consumption: Road condition fuel consumption refers to the vehicle driving on specified roads at prescribed speeds and times. 2. Hourly fuel consumption: If the engine speed is controlled within the same safe range, regardless of the vehicle's speed, the hourly fuel consumption remains the same.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.