How to Deal with Oxidized Car Plugs?

What is the recommended engine oil specification for the Ford Explorer?

The best engine oil specification for the Ford Explorer is 5W-40, as provided by the original manufacturer. If you wish to change the oil during later maintenance, you can choose brands such as Shell, Castrol, or Mobil. The official Ford Explorer manual recommends using 5W-40 engine oil or 0W-40. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the car. The second number represents the kinematic viscosity of the oil at 100°C. A higher number indicates better ability to maintain viscosity under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in the Ford Explorer is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passages to drain out; Use a specialized wrench to remove the oil filter; Apply oil to the oil seal of the new oil filter and tighten it clockwise by hand; Add new oil through the filler cap on the engine valve cover, typically filling up to three-quarters of the oil container; Start the engine and let it run for 5 minutes, checking for any leaks around the oil drain plug and oil filter. If leaks are found, perform necessary repairs; After stopping the engine, pull out the oil dipstick to check that the oil level is within the standard range.

16

3

Share

What is the problem when the starter motor smokes?

The reason for the starter motor smoking is that the resistance is too high when the starter motor is rotating. It is recommended to disassemble the starter motor to check the point card or the rotor shaft. The following is a relevant introduction about the starter motor: 1. It is a short-circuit motor: The starter motor, also known as the motor, can convert the electrical energy of the battery into mechanical energy to drive the engine flywheel to rotate and achieve engine startup. The car starter motor is a short-circuit motor. When installed in the car, the ignition motor starts the engine with a large load and high current, resulting in high temperature and thus smoke. It is normal if it does not smoke when taken down and operated without load. 2. The usage time should not be too long: Each use of the motor should not exceed 5 seconds, and continuous use should not exceed 5 times. Excessive use will cause it to burn out. The battery, also known as the accumulator, is a type of battery. Its working principle is to convert chemical energy into electrical energy.

10

3

Share

How to Open the Sunroof on a Mercedes-Benz?

Inside the car, push the SOS button backward to open the sunroof. The extent to which it opens is up to you. Below are the functions of a car sunroof: 1. Quick Cooling: If you park under direct sunlight, especially in summer, the interior temperature can easily exceed 60°C. Many drivers instinctively turn on the air conditioning upon entering. However, it's more effective to first open the windows and sunroof, which allows the hot air to escape quickly while driving, cooling the car faster. 2. Eliminating Fog: During seasons with significant temperature differences, if the side windows are closed while driving, the windshield can easily fog up. Simply opening the sunroof for a few seconds can quickly clear the fog. 3. Rapid Air Exchange: Opening the sunroof while driving enhances air circulation inside the car, improving ventilation and air quality.

7

4

Share

What is the normal temperature range for a BMW's coolant?

The temperature gauge on a BMW ranges from 0-130°C, with the normal operating temperature being the central 90°C mark. After starting the vehicle, the coolant temperature rises rapidly. Once the needle reaches the central position, a thermal equilibrium is achieved, and the coolant temperature stabilizes. Generally, it's optimal to start driving when the temperature reaches the midpoint. Engine coolant temperature should neither be too low nor too high; it must remain within a specific range. Common cooling system failures include coolant leaks, insufficient coolant levels, malfunctioning radiator fans, and faulty water pumps. For optimal operation, a car engine requires a specific working temperature. Temperatures that are too high or too low can negatively impact engine performance and longevity. Conventional air cooling alone is often insufficient to manage the heat generated by the engine, which is why most automotive engines utilize water-cooling systems for heat dissipation. The cooling system's primary function is to maintain the engine within its ideal temperature range. This enhances engine power output while reducing wear and fuel consumption. Both excessively high and low temperatures can adversely affect engine performance.

14

4

Share

Is Purchase Tax Required for New Energy Vehicles?

Purchasing new energy vehicles does not require payment of purchase tax, but the following conditions must be met: Licensed Vehicles: Pure electric vehicles, plug-in hybrid vehicles, and fuel cell vehicles licensed for sale in China. The power batteries used must not include lead-acid batteries. Conventional Fuel Consumption Limit: The comprehensive fuel consumption of plug-in hybrid commercial vehicles (excluding fuel consumption converted from electricity) must be less than 60% of the corresponding limit in the current national standard for conventional fuel consumption. Passing Inspection: The vehicles must pass the special inspection for new energy vehicles and meet the standard requirements for new energy vehicles.

10

2

Share

Are the Q8 and Urus on the Same Platform?

The all-new Audi Q8, as the flagship luxury SUV of the Audi family, shares the same MLB-evo platform with the Lamborghini Urus. Below is an introduction to the MLB-evo platform: Introduction: MLB is the abbreviation for the German term 'Modularer-Lngsbaukasten,' meaning 'Longitudinal Engine Standardized Platform,' which refers to its modular nature. The MLB platform was first applied to the 2007 Audi A5. Later, to develop Porsche's compact SUV model, the Macan, an improved version called MLB-evo was introduced. Advantages: The MLB-evo platform excels in supporting front-mounted longitudinal engine models, thus removing size limitations on engines. Additionally, it can highly integrate the necessary automotive components, reducing the development cycle and costs for new vehicles. Due to its significant advantages, this platform notably enhances vehicle development and cost reduction.

4

Share

How to Deal with Oxidized Car Plugs?

What is the recommended engine oil specification for the Ford Explorer?

What is the problem when the starter motor smokes?

How to Open the Sunroof on a Mercedes-Benz?

What is the normal temperature range for a BMW's coolant?

Is Purchase Tax Required for New Energy Vehicles?

Are the Q8 and Urus on the Same Platform?

What are the simple methods to check exhaust emissions?

When will China VI emission standards be implemented?

Is Transmission Oil Leakage a Common Phenomenon?

How to Deal with 10% Speeding in Motor Vehicle Driving?