How to Deal with Oil Leakage?

How to Deal with Unstable Steering in Subject Three?

The reasons and solutions for unstable steering in Subject Three are as follows: 1. Lack of vehicle sense. When trainees notice the car body tilting, the vehicle has already deviated significantly. Adjusting the steering at this point will cause obvious shaking. Solution: Sit upright in the driver's seat and look as far ahead as possible. This helps in sensing whether the car's path is parallel to the road. The farther you look, the sooner you can detect any tilting. 2. Overcorrection. In reality, due to factors like road conditions, the car cannot always go straight. When the car body tilts slightly, minor steering adjustments are needed. However, trainees often turn the steering wheel too quickly and drastically. Solution: Make gentle and slow adjustments to the steering, with minimal angles, allowing the car to correct its direction smoothly. 3. Overcompensation. Some trainees turn the steering wheel too much. Solution: The actual steering adjustment should be about the width of two or three fingers. Use the method of small, frequent adjustments to continuously correct the direction.

8

2

Share

What to Do If Resin Drips on the Car?

Here are the solutions for removing resin from a car: 1. Use a specialized car wash liquid designed for removing asphalt to clean the resin off the car. It has a mild and neutral property, capable of quickly and effectively removing sticky substances like tar, asphalt, and resin from the paint surface. 2. If the resin on the car body is not severe, you can use hot water with a small amount of laundry detergent and scrub the resin off with a brush. 3. You can use volatile liquids like gasoline by soaking a cloth and then wiping the affected area. 4. After removing the resin with volatile liquids like gasoline, rinse the car body with clean water and apply wax for maintenance. 5. You can also use a cleaning agent to treat the resin, followed by washing the car and applying wax to the body. Additional Information: Resin generally refers to organic polymers that soften or melt within a certain temperature range, tend to flow under external force when softened, and are solid, semi-solid, or sometimes liquid at room temperature. Broadly defined, any high-molecular compound that can be used as a raw material for plastic product processing is called resin.

6

0

Share

What Causes Mercedes-Benz Steering Gear Failure?

Mercedes-Benz steering gear failure is typically caused by excessive air in the power steering system, leading to abnormal vehicle steering; foreign objects in the steering hydraulic lines causing the steering pump flow control valve to stick; or loose connections in the power steering system resulting in steering fluid leakage. Abnormal noise during steering: Solution: The cause of abnormal noise during steering is usually due to damage to the kingpin and bushing or failure of the column thrust bearing. In such cases, you can turn the steering wheel left and right to identify the source of the noise and proceed with disassembly and inspection. Steering gear oil leakage: Solution: Steering gear oil leakage usually occurs at three locations: the upper cover of the steering gear, the connection between the steering shaft and the pitman arm, and the side end cover. This is often due to prolonged use of the vehicle causing sealing issues. Since these areas are equipped with sealing rings, replacing the oil seals and sealing rings can resolve the issue. Difficulty in steering wheel return: Solution: Most vehicles have an automatic steering return function. If you need to apply the same force to return the steering wheel as you do when turning, it indicates a malfunction in the return function. This issue is usually found in the mechanical parts of the steering system, such as lack of lubrication causing damage to the kingpin and bushing, lack of lubrication in the universal joint connecting the steering wheel and steering gear, or rust in the tie rod end due to insufficient lubrication. In such cases, visit a professional repair shop for maintenance.

20

3

Share

How to Repair Hail Dents on a Car?

The best method to repair hail dents on a car is through paintless dent repair (PDR). PDR has the following characteristics: it does not require traditional 'bodywork, filling, or repainting,' thus preserving the original car paint; the repair time is short, and the cost is very low. The repair effect is excellent, fully protecting the original car. Hail damage is covered under the vehicle damage insurance provided by insurance companies. If you find your vehicle damaged by hail, you can call the hotline to report the incident and file a claim with the insurance company. Steps to file a claim for hail damage to your car: 1. Report the incident to the insurance company. If you have all the necessary documents, you can report the incident to the insurance company within 24 hours. When reporting, provide detailed information such as the vehicle's parking location, the person who parked it, and the weather conditions. 2. After reporting, undergo inspection and damage assessment. After reporting, the insurance company will arrange for a staff member to contact you and conduct an inspection nearby. During the inspection, the staff will take photos of the vehicle's damage. 3. Documents required for the inspection. During the inspection process, you need to provide the staff with the owner's ID card, the vehicle registration certificate, the original and copy of the vehicle driving license, and the owner's bank card. Ensure all these documents are valid.

13

0

Share

Does Turning on the Air Conditioning Affect the Fuel Consumption of the Tayron?

Turning on the air conditioning in a car does affect fuel consumption. As the engine load increases, the lower the cooling temperature or the higher the heating temperature, the more the fuel consumption will rise. The Tayron has a combined fuel consumption of 6.7-7.5L/100km. Currently, there are 5 models of the Tayron available for sale. The Tian Luxury Intelligent Connect version has a combined fuel consumption of 6.7L/100km. The Luxury Intelligent Connect Plus and Luxury Intelligent Connect versions have a combined fuel consumption of 6.8L/100km. The R-Line Intelligent Connect and Luxury Intelligent Connect Pro versions have a combined fuel consumption of 7.5L/100km. The above figures are the NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than these values, ranging from 7.0-12.0L/100km. Reasons for high car fuel consumption: Abnormal tire pressure or switching to larger tires: Underinflated tires affect fuel consumption. When tire pressure is too low, the contact area between the tire and the ground increases, leading to greater driving resistance, which naturally results in higher fuel consumption. Long idling without turning off the engine or frequent ignition: When waiting for a long time without needing to move the vehicle, it is recommended to turn off the engine. Every time the engine starts, the computer-controlled fuel injection volume is higher, so frequent engine starts within a short period will definitely increase fuel consumption. Aggressive acceleration and frequent braking while driving: Unless necessary, avoid frequent overtaking while driving. Maintaining a steady speed helps reduce fuel consumption. Additionally, maintaining a proper following distance and minimizing unnecessary braking actions can also save fuel. Driving at low gear with high speed or high gear with low speed: This situation is more common among new drivers. Often, the vehicle's speed is already high, but the gear has not been shifted up accordingly, leading to higher engine RPM and naturally higher fuel consumption. Another scenario is driving at a very low speed while staying in a high gear, which is characterized by engine and body shaking and the risk of stalling. Fully open windows in summer or using air conditioning in traffic jams: Using air conditioning in summer increases engine load, leading to higher fuel consumption. Not planning the route properly, driving on congested roads, or frequently changing lanes: It is advisable to plan the route in advance, check local traffic information, and avoid congested roads.

13

4

Share

What is the tire size of Model Y?

Model Y comes with 2 types of tires. For the 2022 Model Y base version and the Model Y Long Range version, the front and rear tire specifications are 255/45R19. For the Model Y Performance version, the front tire specification is 255/45R19, while the rear tire specification is 275/35R21. In the 255/45R19 specification, the first number 255 represents the tire width of 255MM, 45 indicates the aspect ratio of the tire section is 45%, meaning the section height is 45% of the width, and 19 denotes the rim diameter of 19 inches. The letter R in the middle stands for radial tire. In the 275/35R21 specification, the first number 275 represents the tire width of 275MM, 35 indicates the aspect ratio of the tire section is 35%, meaning the section height is 35% of the width, and 21 denotes the rim diameter of 21 inches. The letter R in the middle stands for radial tire. The original tire brands for Model Y are Hankook and Michelin, with the 19-inch tires featuring Gemini wheel rims. Tires are crucial components of a vehicle, with over 10 markings on them. Correctly identifying these markings is essential for tire selection, usage, and maintenance, significantly contributing to driving safety and extending tire lifespan. Typically mounted on metal rims, tires support the vehicle body, absorb external shocks, ensure contact with the road, and maintain driving performance. Tires operate under complex and demanding conditions, enduring various deformations, loads, forces, and temperature extremes. Thus, they must possess high load-bearing, traction, and cushioning capabilities, along with excellent wear resistance, flexibility, low rolling resistance, and heat generation. Tire Specifications: Specifications indicate geometric parameters and physical performance data of tires. There are three methods to represent tire specifications: A. Metric (m); B. Mixed metric-imperial; C. Imperial. Imperial tire specifications commonly use a set of numbers, where the first number represents the tire section width, and the second number represents the rim diameter, both in inches. Tires can be categorized into approximately 8 types based on vehicle type: PC—Passenger car tires; LT—Light truck tires; TB—Truck and bus tires; AG—Agricultural vehicle tires; OTR—Off-the-road tires; ID—Industrial vehicle tires; AC—Aircraft tires; MC—Motorcycle tires. Structurally, tires can be divided into bias-ply tires and radial tires. Modern passenger cars predominantly use radial tires, denoted by the letter R, while bias-ply tires are denoted by D. The fundamental difference lies in the carcass: bias-ply tires have crisscrossed layers of fabric, whereas radial tires feature multiple layers of polymer material, with the top layer consisting of steel belts to reduce puncture risks. Besides specifications, tires also display the following common data: Carcass cord material: Represented by Chinese pinyin, such as M—Cotton cord, R—Rayon cord, N—Nylon cord, G—Steel cord, ZG—Steel radial cord. Speed rating: Indicates the maximum speed a tire can carry a specified load under defined conditions. Letters A to Z represent speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Indicates the rim size compatible with the tire for practical use, e.g., standard rim 5.00F.

13

4

Share

How to Deal with Oil Leakage?

How to Deal with Unstable Steering in Subject Three?

What to Do If Resin Drips on the Car?

What Causes Mercedes-Benz Steering Gear Failure?

How to Repair Hail Dents on a Car?

Does Turning on the Air Conditioning Affect the Fuel Consumption of the Tayron?

What is the tire size of Model Y?

What is the tire pressure for the Arrizo 5?

Where is the carbon canister installed?

Which Fuse is the ABS Fuse for the Ford Escort?

How Often Should the Battery in the Lamando Be Replaced?