How to Deal with Odor in Flood-Damaged Cars?

How to Remove and Install a Car Air Conditioning Blower?

The steps for removing and installing a car air conditioning blower are: 1. Unplug the blower power connector; 2. Remove the blower retaining screws; 3. Hold the blower and rotate it to the left; 4. Align the blower with the airbox slot and insert it; 5. Rotate it to the right and reinstall the retaining screws to complete the installation. The steps for turning on the car air conditioning are: 1. Turn the knob in the air conditioning control area to the cooling or heating zone; 2. Press the AC button when cooling is needed. The functions of car air conditioning are: 1. To provide a comfortable environment for passengers and reduce travel fatigue; 2. To create good working conditions for the driver and ensure safe driving.

16

1

Share

What is the correct way for a car to pass over a speed bump?

The correct way for a car to pass over a speed bump is to reduce speed before crossing, then slowly pass over it with both wheels perpendicular to the bump. This method allows both left and right wheels to contract simultaneously, with the ground force being evenly distributed between the springs and shock absorbers of both wheels. Even force distribution helps minimize damage to the vehicle. Incorrect ways to drive over speed bumps include: 1. Passing with only one side's tires; 2. Driving over at high speed; 3. Crossing diagonally. Speed bumps, also known as speed humps, are traffic safety installations on roads designed to reduce the speed of motor vehicles and non-motorized vehicles.

4

1

Share

What are the differences between the Vitara and the SX4?

The differences between the Vitara and the SX4 are: 1. Different body dimensions: The SX4 has a body length of 4300 mm, width of 1765 mm, and height of 1580 mm; the Vitara has a body length of 4175 mm, width of 1775 mm, and height of 1610 mm. 2. Different wheelbase: The SX4 has a wheelbase of 2600 mm; the Vitara has a wheelbase of 2500 mm. Both the Vitara and the SX4 are compact SUVs under the Changan Suzuki brand, equipped with a 6-speed manual transmission. The front suspension for both models uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension.

17

2

Share

How to Open the Trunk of a Buick Excelle?

Buick Excelle's trunk can be opened by: 1. Pressing the button on the driver's side door panel; 2. Using the remote key. The Buick Excelle is a compact car under SAIC-GM Buick, with body dimensions of 4609mm in length, 1798mm in width, 1486mm in height, a wheelbase of 2640mm, and a fuel tank capacity of 44 liters. The Buick Excelle is equipped with a 1.3T turbocharged engine, delivering a maximum horsepower of 163 hp, a maximum power of 120 kW, and a maximum power speed of 5500 rpm, paired with a 6-speed automatic transmission.

9

0

Share

How to Turn Off Car Turn Signals?

Car turn signals can be turned off by manually moving the turn signal switch below the steering wheel to the middle position. Scenarios for using turn signals include: 1. When turning: activate the right turn signal before turning right or the left turn signal before turning left, while observing road conditions; 2. When changing lanes: activate the right turn signal before moving right or the left turn signal before moving left, waiting for three flashes before changing lanes; 3. When overtaking: when overtaking on the left, activate the left turn signal before overtaking and proceed only after ensuring safety; 4. When pulling over: signaling left or right gives following vehicles advance notice; 5. When starting from roadside: activate the left turn signal when starting from a parked position on the right side of the road.

7

4

Share

Why is the radiator fan of a sedan not working?

The reasons why the radiator fan of a sedan is not working are: 1. The fuse is blown; 2. The thermal switch is damaged; 3. The air filter is clogged; 4. The coolant is missing or the heater core is blocked. The usage and maintenance of the radiator are: 1. The radiator should not come into contact with any acid, alkali, or other corrosive substances; 2. It is recommended to use soft water, and hard water should be softened before use; 3. Use antifreeze to prevent corrosion of the radiator; 4. During the installation of the radiator, do not damage the cooling fins or dent the radiator; 5. When completely draining and refilling the radiator, first open the drain switch of the engine block; 6. In daily use, always check the water level and add water only after the engine has cooled down.

5

4

Share

How to Deal with Odor in Flood-Damaged Cars?

How to Remove and Install a Car Air Conditioning Blower?

What is the correct way for a car to pass over a speed bump?

What are the differences between the Vitara and the SX4?

How to Open the Trunk of a Buick Excelle?

How to Turn Off Car Turn Signals?

Why is the radiator fan of a sedan not working?

Should You Press the Brake When Starting a Manual Transmission Car?

What kind of engine oil should be used for the Mondeo 2.0t?

What is the purpose of rotating car tires?

Is the fuel filler cap of the Magotan on the left or right side?