How to deal with odor after water enters the car?

What is the cause of the Buick P0171 fuel system too lean?

Buick P0171 fuel system too lean indicates that the mixture inside the engine is too lean, which prevents it from meeting the required standards during combustion, resulting in limited power output from the vehicle's engine. Symptom: Fuel trim refers to the electronic control unit (ECU) controlling fuel delivery by increasing or decreasing the injector opening time to achieve the optimal air-fuel ratio (air to gasoline mass ratio of 14.7:1). A too rich air-fuel ratio means excessive fuel delivery, while a too lean air-fuel ratio means insufficient fuel delivery. Causes: These include air leaks after the mass air flow (MAF) sensor, PCV system leaks, exhaust leaks near or before the oxygen sensor, clogged fuel injectors or other fuel system faults, EGR system leaks, and a contaminated MAF sensor (causing the electronic control module to underestimate air flow).

2

4

Share

What does the small stick on the Mazda CX4 dashboard mean?

Introduction to the meaning of the small stick on the Mazda CX4 dashboard: 1. Displays average fuel consumption. Press the small black stick once, and it will show the average fuel consumption, measured in L/100km. However, this data is for reference only. For example, the Ford Escort manual comfort model displays 6.3L/100km here, while the actual fuel consumption is around 7.5L. 2. Displays instantaneous fuel consumption. Instantaneous fuel consumption equals the fuel consumption in an instant divided by the distance traveled by the vehicle with that fuel in that instant. Since an infinitely small time cannot be measured, it is usually calculated in 2-second intervals, which may explain why many cars show an instantaneous fuel consumption of 99.9L/100km when idling at a red light. 3. Displays remaining range. Simply put, the working condition specifies the type of road, speed, and duration (distance) of travel.

2

0

Share

How many liters of transmission fluid does a Sylphy need for replacement?

Sylphy requires approximately four to six liters for manual fluid replacement (gravity method), and about nine to twelve liters if using a fluid exchange machine. The Sylphy is equipped with the XTRONIC CVT (Continuously Variable Transmission), model Jatco-JF015E. It is generally recommended to replace the transmission fluid every two years or around 60,000 kilometers. The methods for replacing transmission fluid are as follows: Unscrew the drain plug at the bottom of the transmission to drain the old fluid, then refill with new fluid. Remove the transmission oil pan directly to drain and refill the fluid: This method is more thorough than the previous one, as it allows for the removal of debris from the bottom of the oil pan. Using a circulation machine to replace automatic transmission fluid: A smart circulation machine can dynamically exchange the fluid, filtering and cleaning out sludge and impurities from the automatic transmission.

2

Share

Differences Between Mini Cars and Subcompact Cars?

The differences between mini cars and subcompact cars mainly lie in body length, wheelbase, and engine displacement. Vehicles are generally categorized into sedans, SUVs, MPVs, sports cars, pickup trucks, and microvans. Among sedans, there are mini cars, subcompact cars, compact cars, midsize cars, full-size cars, and luxury cars. Here are the specific differences: 1. In terms of body length: Mini cars are less than 3.7 meters long, while subcompact cars range between 3.7 to 4.3 meters. 2. In terms of wheelbase: Mini cars have a wheelbase between 2000mm to 2300mm, while subcompact cars range from 2300mm to 2500mm. 3. In terms of engine displacement: Mini cars typically have an engine displacement around 1.0L, while subcompact cars range between 1.0L to 1.5L. 4. Representative models of mini cars include the Suzuki Wagon R, Chery QQ, Mercedes-Benz Smart, BYD F0, and BenBen. Representative models of subcompact cars include the Honda Fit, Toyota Vios, Volkswagen POLO, and Baojun 310.

14

1

Share

What type of engine oil should be used for the 2021 Mercedes-Benz C260L?

2021 Mercedes-Benz C260L requires fully synthetic engine oil. The advantages of fully synthetic engine oil are introduced as follows: Low evaporation loss of fully synthetic engine oil: Fully synthetic oil is a pure compound with a narrow boiling point range, and its evaporation loss is much lower than that of mineral oil, which can reduce fuel consumption, reduce exhaust emissions, and extend the service life of the catalytic converter. In addition, compared with traditional mineral oil, synthetic engine oil also has excellent chemical stability, good radiation resistance, high oil film strength, and low foaming characteristics. Therefore, high-end cars generally choose synthetic engine oil. Strong high-temperature oxidation resistance of fully synthetic engine oil: The thermal oxidation stability of fully synthetic oil is much better than that of mineral oil, meaning it has a lower tendency to produce acidic substances and sludge due to oxidation. Under various harsh operating conditions, it can provide appropriate lubrication and effective protection for the engine, thus having a longer service life and ensuring the stability of the oil's performance over long-term use. In the same working environment, synthetic oil has a much longer service life than mineral oil, so although the cost is higher, when comparing the number of oil changes, it is not much higher than mineral oil.

7

5

Share

Steps to Turn Off the Car with the Key

Steps to turn off the car with the key: After the vehicle comes to a complete stop, shift to neutral, engage the parking brake, release the clutch and brake pedals, reset the lights, and turn the key to the OFF position. Generally, turning the key counterclockwise once shuts off the engine, while turning it twice cuts off all power. Here are the correct steps to park and turn off an automatic transmission vehicle: 1. Press the brake pedal to ensure the vehicle is stationary and shift the gear to N (Neutral); 2. Engage the parking brake; 3. Shift to P (Park) and release the brake; 4. Turn off any unnecessary electrical devices in the car; 5. Verify that the gear is in P (Park), all unnecessary electrical devices are turned off, and the steering wheel is straightened; 6. Rotate the key counterclockwise to the end, or press the push-button start once to set the ignition switch to the OFF position.

14

3

Share

How to deal with odor after water enters the car?

What is the cause of the Buick P0171 fuel system too lean?

What does the small stick on the Mazda CX4 dashboard mean?

How many liters of transmission fluid does a Sylphy need for replacement?

Differences Between Mini Cars and Subcompact Cars?

What type of engine oil should be used for the 2021 Mercedes-Benz C260L?

Steps to Turn Off the Car with the Key

What causes the whining noise during acceleration in an Audi A6L?

Can a Car Be Push-Started When the Battery Is Dead?

Can't the Jetta VS5 use 92 octane gasoline?

What is the highway fuel consumption of the Sylphy e-POWER?