How to Deal with Obstructed License Plates?

2 Answers
SanWyatt
07/25/25 1:53pm
Intentionally obstructing a license plate results in a 12-point deduction, a fine of 200 yuan, and a warning. Below is an introduction to vehicle license plates: Introduction: A license plate, commonly known as a vehicle plate, is a board made of materials such as aluminum, sheet iron, plastic, or paper, which is affixed to the front and rear of a vehicle. It displays the vehicle's registration number, registration region, and other relevant information. Function: License plates serve to number and register vehicles, allowing identification of the vehicle's region of registration. They also enable tracking of the vehicle's owner and registration details. Temporary License Plates: A temporary vehicle license plate is issued by the vehicle management department of the public security authority when a vehicle is undergoing registration procedures and has not yet been officially registered.
Was this review help?
20
1
Share
StRhett
08/11/25 8:54pm
I think obscuring license plates is no small matter—it's explicitly prohibited by law. I often see people getting pulled over by traffic police because their plates are covered in snow or mud, and getting fined 200 yuan plus 3 demerit points is considered light. If the situation is more serious, like intentionally covering the plate with a sticker, the driver’s license could be suspended outright. This issue has significant consequences—if the plate isn’t clear, surveillance cameras can’t capture it, making accident accountability much harder. I recommend walking around the car before driving to carefully check the cleanliness of the plates, especially after rain or snow, and cleaning them promptly. If you accidentally obscure the plate, pull over and cooperate with authorities without arguing to avoid escalating penalties. Developing good habits can save a lot of trouble—safe driving isn’t just about avoiding risks but also maintaining social order.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

At what mileage should the second maintenance be performed for Volkswagen?

This can be completely determined according to the car maintenance manual, and it can be done at 10,000 kilometers. The items for the second car maintenance are as follows: Check if the steering free travel and toe-in meet the requirements: The steering should be light, flexible, and reliable, with no left-right wobbling or deviation of the front wheels during driving. Check if the clutch free travel meets the requirements: The operation should be convenient, with complete separation, smooth and reliable engagement, no abnormal noise, and no oil leakage in the hydraulic system. Check the gearbox and drive axle: Or ensure that the half-shaft transmission device and other components are well lubricated, reliably connected, with no abnormal noise or overheating, no gear jumping, flexible gear shifting, and no oil leakage.
4
3
Share

Which button is the mirror heater for the Corolla?

The rearview mirror heating button for the Corolla is located on the car's air conditioning control panel, specifically the middle one among the three rotary buttons. Principle of heated mirrors: The mirrors can be heated via heating wires embedded behind the mirror surfaces to ensure clear visibility. The heated rearview mirror function is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the surface, gradually removing rainwater or fog, eliminating the need for drivers to manually wipe the mirrors frequently, thereby reducing driving hazards. Introduction to heated mirrors: Heated power mirrors refer to the side mirrors on both car windows. Firstly, they eliminate the need for manual angle adjustment - being electrically controlled, they typically have adjustment buttons near the driver's seat to modify the mirror angles. Secondly, these mirrors can automatically heat up, drying raindrops or snow accumulation on the surface during rainy or snowy conditions, thus maintaining clear visibility.
9
3
Share

Should Civic touch-up paint be done at a 4S shop or outside?

It is recommended to go to a 4S shop for painting, as the quality is better. Small shops outside may have some color differences. Precautions for painting are as follows: Do not wash the car: After the car is painted, the paint surface should be fine after a few days. Just after painting, pay attention to insufficient baking time. It is best not to wash the car when the paint surface is not completely dry. Avoid contact with oil stains: Do not come into contact with chemicals and oil stains, as they can easily damage the paint surface. Do not cover with a car cover: Try not to cover the newly painted car with a car cover, as it may cause fine scratches on the paint surface. Park in the sun as much as possible: First, it helps the paint surface to dry thoroughly, and second, it can also test the skills of the paint mixing technician.
14
3
Share

Is the Freon in Cars the Same as That in Household Air Conditioners?

Freon in cars is the same as that in household air conditioners. Below is a partial introduction about car air conditioners: Lack of refrigerant or leaks: Most cases of insufficient cooling are due to a lack of refrigerant. You can first measure the air conditioning pressure. If both high and low pressures are low, it is likely a lack of refrigerant, and you simply need to add refrigerant until the pressure is appropriate. Excessive pressure in the air conditioning system: The car air conditioning system has its own pressure due to the compressor's operation. When too much refrigerant is added or there is a blockage in the pipeline, the system pressure can become too high. In such cases, the control system will disengage the compressor's electromagnetic clutch, causing the compressor to shut down. The solution is simple: once excessive pressure is confirmed, release some refrigerant to restore normal pressure. Damaged evaporator temperature sensor or pressure switch: The evaporator, also known as the evaporator box, is located in the air duct under the dashboard. Here, the refrigerant vaporizes and absorbs heat to produce low temperatures. When air flows through the small channels above the evaporator, it is cooled. The compressor stops when the temperature approaches the frost point. If this sensor is damaged and frequently gives false readings of approaching frost temperature, the compressor will shut down frequently.
18
3
Share

Can Seat Heating Function Be Added Afterwards?

Seat heating function can be added afterwards. Below is an introduction about seat heating: Basic structure of seat heater: The lower layer is a piece of non-woven fabric, with heating wires arranged on it. The heating wires are fixed to the non-woven fabric with adhesive tape. Knitted fabric covers the adhesive tape and is sewn with knitting thread into a shape similar to the heated area of the seat, then sewn into the seat cover. Seat heating utilizes the electric heating wires inside the seat to heat the interior of the seat, transferring the heat to the occupant through thermal conduction, improving the discomfort caused by the seat being too cold after prolonged parking in winter. Working method of seat heater: The backrest heater is connected to the power supply of the seat cushion heater via a connector. The power supply of the seat cushion heater is connected to the dashboard wiring harness through a connector, then linked to the battery power supply via the seat heating switch, fuse, and ignition switch.
8
1
Share

Where is the fuse box located in Discovery 4?

Land Rover Discovery 4's fuse box is located behind the glove compartment on the passenger side, at the front end of the right cylinder head, controlled by the electronic oil pressure switch. Introduction to Fuse Box: A fuse box refers to the housing (also known as a fuse holder) that holds fuses, facilitating their installation. Some fuse boxes feature properties such as waterproofing, fire resistance, and high-temperature resistance (depending on the material and design). Definition of Fuse Box: Fuse boxes can be categorized into lead-type fuse boxes and automotive fuse boxes. Common injection molding materials for fuse boxes include plastic, nylon, bakelite, and PBT engineering plastic. Each material varies in its high-temperature resistance. When selecting a fuse box, considerations should include the current rating of the fuse to be used, the size requirements of the fuse, and the fact that higher current fuses require larger gauge wiring to prevent overheating of the fuse box and wiring, which could lead to a fire.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.