···
Log in / Register

How to Deal with Objects Falling into the Windshield Gap?

4 Answers
DeIker
09/02/25 4:16am

There are four main solutions for objects falling into the windshield gap. Below is a detailed introduction to these four methods: Using a ruler to stick out the object: Tape (or a sticky object like chewing gum) is attached to the front of the ruler, which is then inserted into the gap to stick out the object. Using a wire to hook out the object: Bend the front of the wire into a hook and use it to fish out the object. If one wire doesn't work, try using two. Going to a professional auto repair shop to remove the dashboard: This method must be performed at a 4S shop or a professional auto repair shop. It is not recommended to go to a 4S shop as they will charge for disassembly (labor costs). If the object is not valuable, it can be left alone. The object will not have any impact on the car's performance, driving, safety, or any other aspect.

Was this review help?
10
2
Share
LuciaAnn
09/14/25 6:29am

A few days ago, I helped someone deal with this issue. It's quite common for debris to fall into the gaps around the windshield, especially near the wiper base. Don't panic—first, park in a safe place and use your phone's flashlight to locate the debris. Most items like leaves or small pieces of paper are easy to remove with long tweezers or a vacuum cleaner; avoid using sharp tools to prevent scratching the glass or damaging wiring. If debris clogs the drainage holes, rainwater won't drain properly, potentially causing mold or rust in the interior, so regular cleaning is recommended. If a hard object gets stuck and affects wind noise or wiper movement, seek professional removal at an auto repair shop. In short, act promptly or seek help to keep your car clean and prevent minor issues from turning into major repairs.

Was this review help?
1
4
Share
Expand All
LeBrooklyn
10/28/25 7:13am

I've encountered this issue with my own car before—once a phone case fell into the gap and got stuck. I simply bought plastic tweezers from the store and gently pulled it out, which worked perfectly; avoid using bare hands to prevent injury. Debris accumulation can block drainage outlets, leading to rainwater backflow and corrosion of parts, which over time increases humidity inside the car. Prevention is simple: use a soft brush to clean the wiper area weekly and place a protective mat to reduce falling objects. Tools like a vacuum or adhesive tape can also help. If you can't remove it, seeking a professional mechanic is the safest option—they know the car's structure well and can avoid accidental damage. Don't force it out; save yourself the hassle.

Was this review help?
4
2
Share
Expand All
McCameron
12/11/25 7:28am

Safety comes first. When attempting to remove an object safely while parked, first assess its size; small items can be tried with a vacuum cleaner or adhesive tape, ensuring the tools are clean to avoid leaving debris. Objects falling into gaps may affect sealing, leading to leaks and rust, so I always check the edges of the glass to prevent loosening. If you can't handle it yourself, seek professional repair to avoid damaging the car. Regular cleaning for prevention is the best approach.

Was this review help?
1
0
Share
Expand All
More Forum Discussions

What is a car with poor brakes called?

Tesla is the car with poor brakes. Here is an introduction about Tesla: Introduction to Tesla: Tesla is an American electric vehicle and energy company that manufactures and sells electric vehicles, solar panels, and energy storage equipment. Its headquarters is located in Palo Alto, California. It was founded on July 1, 2003, by Martin Eberhard and Marc Tarpenning, who named the company "Tesla Motors" in honor of the physicist Nikola Tesla. History of Tesla: Tesla's initial new energy vehicle startup team mainly came from Silicon Valley, using IT concepts to build cars rather than the traditional approach represented by Detroit's automakers. Therefore, Tesla's creation of electric vehicles is often seen as a story of a Silicon Valley upstart challenging Detroit's giants.
14
3
Share

What causes the brake lights to stay on and not turn off?

Brake lights staying on and not turning off is usually caused by a faulty brake switch. Here is some relevant information about car brake lights: Working principle: Brake lights are an important component of rear lights, distributed one on each side of the rear light assembly. The red light they emit serves as a warning signal, illuminating when the brake pedal is pressed (including when using the handbrake). Function: Brake lights alert following vehicles that the car is slowing down or stopping, allowing them to prepare in advance and take evasive action. Modern brake lights are typically fog lights that can penetrate thick fog, providing better warning effectiveness.
8
3
Share

Why Can't the Brake Be Depressed and the Car Won't Start?

Brake can't be depressed and the car won't start for the following reasons: Steering wheel lock: After inserting the key, turn it in the normal ignition direction, but not all the way. Gently turn it to the battery switch position. Once the car is powered on, gently move the steering wheel left and right. If the steering wheel can move, then depress the brake and start the car. Remember to straighten the steering wheel when parking in the future to avoid the same problem recurring. Low car battery power: In this case, after inserting the key, turn it to the battery switch position and observe whether the dashboard behind the steering wheel shows power. If unsure, turn on the headlights to confirm again. If the headlights don't light up, it confirms the battery is dead.
17
1
Share

What are the effects of water entering the brake system?

The impact of water entering the brake system is that it can cause brake lag, leading to vehicle deviation during braking and potential accidents. Below is an introduction about brakes: Introduction: As the name suggests, it is a mechanical braking device that can slow down the vehicle, also known as a decelerator. Function: The car brake pedal is located below the steering wheel. Pressing the brake pedal causes the brake lever linkage to be pressurized and transmitted to the brake shoes on the brake drum, which then clamp the brake disc to slow down or stop the vehicle. Category: The manual brake in a car is located next to the gear shift and is connected to the brake lever. Common types also include bicycle brakes, which rely on rod-shaped brakes fixed to the frame or disc-mounted caliper brakes to slow down.
12
5
Share

What is the reason for the occasional feeling of a loose brake pedal?

Occasionally feeling a loose brake pedal accompanied by a decrease in braking force indicates a malfunction in the brake system. Below is relevant information about brakes: Introduction: As the name suggests, it is a mechanical braking device that slows down the vehicle, also known as a decelerator. Structure: The car brake pedal is located below the steering wheel. Pressing the brake pedal causes the brake linkage to be pressurized and transmitted to the brake shoes on the brake drum, which then clamp the brake disc. Function: To slow down or stop the vehicle. The manual brake in a car is located beside the gear shift and is connected to the brake lever. Common examples also include bicycle brakes, which rely on rod-shaped brakes fixed to the frame or disc caliper brakes to decelerate.
20
3
Share

What is the material of brake discs?

The material of brake discs adopts the domestic gray cast iron 250 standard, abbreviated as HT250, which is equivalent to the American G3000 standard. The requirements for the three main chemical elements are: C: 3.1 3.4, Si: 1.9 2.3, Mn: 0.6 0.9. More details are as follows: Mechanical performance requirements: tensile strength >=206MPa, bending strength >=1000MPa, deflection >=5.1mm, hardness should be between 187 241HBS. Alternative names: In English, brake discs are usually referred to as BRAKE-DISC or BRAKE-ROTORS, while brake drums are called BRAKE-DRUM. Additionally, in southern China, brake discs are also known as brake discs or brake rotors. In fact, they all refer to the same thing.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.