How to Deal with Noisy Windshield Wipers?

[DiJayla]

The methods to address noisy windshield wipers are: 1. Replace with new wiper blades; 2. Inspect and clean any debris on the wiper blades or underneath them; 3. Check and repair the wiper arm or wiper linkage bushings; 4. Replace the drive motor. The functions of windshield wipers are: 1. To remove raindrops and dust adhering to the vehicle's windshield; 2. To improve the driver's visibility; 3. To enhance driving safety. The steps to replace windshield wipers are: 1. Lift the wiper upright; 2. Press the clip below and remove the wiper blade; 3. Take off the wiper, then lift the front end of the middle clip; 4. Insert the wiper into the middle clip, pull it tight by hand, and the replacement is complete once a clicking sound is heard.

[VanAlessandra]

Last weekend while driving, the windshield wipers suddenly started squeaking loudly, hurting my ears. I think the rubber blades might have aged—after two years of use, they wear out and harden, causing friction against the glass. First, I cleaned the windshield. Parking under trees often leads to dust and oil buildup, so using a dedicated glass cleaner or diluted alcohol to remove grease solved most of the problem. Replacing the wiper blades is also simple—just buy the right size for your car model at the supermarket and snap them into place, aligning the clips gently. If the wiper arm is too loose or tight, it can also cause noise. I adjusted the position myself by slightly tightening the joint screw with a wrench. For regular maintenance, avoid dry wiping—always spray water first before turning on the wipers in the rain to reduce wear. After addressing these issues, the noise disappeared, making the drive much quieter. Safety comes first, and clear visibility is the most important thing.

[DeGarrett]

Don't worry about wiper noise, quickly troubleshoot in a few steps. First check if the rubber blade has cracks or worn edges - replacing aged blades is cost-effective with fast results. Then clean the windshield with soapy water using a soft cloth to remove oil film, as excessive grease often causes noise. Inspect if the wiper arm is loose - tighten screws and adjust pressure to ensure even contact. Regular maintenance prevents dust buildup; add washer fluid before rain for lubrication. DIY fixes take just minutes, saving time and money while ensuring quiet driving with clear vision and smooth operation.

[JasperMarie]

The squeaking issue with my wipers was caused by either worn rubber blades or dirty windshield surface creating friction noise. Wiping the glass with alcohol significantly improved it. Improper installation with misaligned blade slots was another reason, which was resolved by firmly reinserting them. Occasionally, lubricating the wiper arm track with silicone spray helps reduce noise. Avoid dry wiping - always spray water first to protect the rubber and extend its lifespan. These simple steps maintain smooth wiper operation for safe and reliable driving.

[StSamantha]

Having driven for decades, squeaky wipers are common. I always keep the windshield clean and promptly remove oil film. Wiper blades are replaced annually to prevent aging, hardening, and noise. Check if the wiper arm is misaligned and tighten screws to eliminate abnormal sounds. In cold winters when the rubber hardens, pre-warm it before use. When replacing blades myself, I choose high-quality ones that last years without issues—saving money and hassle while ensuring safe driving visibility is paramount.