How to Deal with Nervousness During the Subject 2 Driving Test?

2 Answers
KiraAnn
07/24/25 2:23pm
This is a normal situation. Most people feel nervous when taking the Subject 2 driving test. The key is to practice driving more. The more you practice, the more confident you become, and the less nervous you'll feel. Additionally, it's important to relax and tell yourself that if you fail, you can always retake the test. Many people fail because they worry too much about failing—ironically, the more you worry, the more likely you are to fail. Approaching the test with a relaxed and carefree attitude often leads to better results. Also, taking deep breaths and doing some chest-expanding exercises before the test can help alleviate nervousness. The test items for Subject 2 vary depending on the type of vehicle. The details are as follows: 1. Basic test items: pole test, hill start, parallel parking, single-plank bridge, curve driving, right-angle turn, speed-limited passage through a narrow gate, continuous obstacle course, 100-meter gear shifting, and bumpy road driving. 2. For large buses, tractors, city buses, medium-sized buses, and large trucks, the test must include at least 6 items. (1) Mandatory items for large buses and city buses: pole test, hill start, right-angle turn, single-plank bridge, and continuous obstacle course. (2) Mandatory items for tractors: pole test, hill start, curve driving, right-angle turn, and speed-limited passage through a narrow gate. (3) Mandatory items for medium-sized buses and large trucks: pole test, hill start, parallel parking, single-plank bridge, and continuous obstacle course. Other items are randomly selected. 3. For small cars, small automatic cars, small automatic cars for the disabled, low-speed trucks, ordinary three-wheeled motorcycles, and ordinary two-wheeled motorcycles, the test must include at least 4 items. (1) Mandatory items for small cars and low-speed trucks: pole test, hill start, and parallel parking. (2) Mandatory items for small automatic cars and small automatic cars for the disabled: pole test and parallel parking. (3) Mandatory items for ordinary three-wheeled motorcycles and ordinary two-wheeled motorcycles: pole test, hill start, and single-plank bridge. Other items are randomly selected.
Was this review help?
18
0
Share
Preston
08/11/25 8:12am
I remember when I was taking the Subject 2 test, I was so nervous that my palms were sweating, and I almost broke the steering wheel. But later, I found that practicing more really helps. I went to the simulation site in advance and ran more than a dozen laps to familiarize myself with every point and turning angle. Having a solid grasp gave me much more confidence. Before the test, remember to take three deep breaths—inhale through the nose and exhale through the mouth. Don’t rush to get in the car; take a moment to calm down first. My coach always taught me to focus on the actions themselves, not on whether I’d pass or fail. If you make a mistake, don’t panic—you’ll just lose some points at most, and you can try again. After the test, I realized that it’s mostly about daily training, and safe driving is the real goal. I suggest practicing with a partner more often to simulate the test and give each other feedback—it makes the actual test much easier. After all, driving is a lifelong skill, and the test is just the beginning.
Was this review help?
15
4
Share
Expand All
More Forum Discussions

What to Do If the Idle Speed Is High During Cold Start?

High idle speed during cold start is a normal phenomenon. When starting in a cold state, the engine needs to quickly reach its normal operating conditions. Therefore, during a cold start, the engine control unit automatically injects more fuel, burning more fuel than during normal idle to rapidly increase the engine's coolant temperature and bring the engine to the optimal operating temperature. The idle speed typically ranges between 950 and 1300 RPM. Once the engine temperature rises to a certain level, the idle speed will drop to the normal range. A cold start refers to starting the engine when the coolant temperature is low, usually after the car has not been used for an extended period, such as overnight parking.
13
0
Share

What does Xingyue EVO mean?

Xingyue EVO is a model under the Xingyue brand. Here are the specific details about the Xingyue EVO: 1. Body Dimensions: The vehicle measures 4770mm in length, 1895mm in width, and 1689mm in height, with a wheelbase of 2845mm, front and rear track of 1610mm, a curb weight of 1675kg, and a fuel tank capacity of 55L. 2. Powertrain Configuration: Equipped with a turbocharged engine, the engine model is JLH-4G20TDJ, delivering a maximum horsepower of 218PS, a maximum power of 160kw, and a maximum torque of 325nm.
3
5
Share

Should I buy the Avalon 2.5 gasoline version or the hybrid version?

Here are the specific differences between the Avalon 2.5 gasoline version (top trim) and the hybrid version: 1. Price: The official price of the Avalon hybrid top trim is slightly higher than that of the gasoline top trim version. 2. Power output: The Avalon hybrid top trim version is more powerful than the gasoline top trim version. 3. Performance: The Avalon hybrid version's engine has a maximum horsepower of 178PS, maximum power of 131kw, and maximum torque of 221nm; the Avalon top trim gasoline version's engine has a maximum horsepower of 209PS, maximum power of 154kw, and maximum torque of 250nm.
4
3
Share

How much engine oil does an A3 need?

Audi A3 requires between 3.5-4.0 liters of engine oil. Here is some relevant information about engine oil: 1. Engine oil, also known as engine lubricant, has a density of approximately 0.91kg/10 cubic meters. It serves multiple functions such as lubrication and friction reduction, auxiliary cooling, sealing and leakage prevention, rust and corrosion protection, and shock absorption. It is often referred to as the 'blood' of a car. 2. Engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of the lubricant, determining its fundamental properties. Additives are used to compensate for and enhance the performance of the base oil, providing additional characteristics. They are an essential part of the lubricant.
8
1
Share

Is MG a Domestic or Joint-Venture Car?

MG, short for Morris Garages, originated from the British brand Rover. MG is classified as a domestic car and falls under the SAIC Motor Corporation. Below are detailed insights about MG: Overview: MG (Morris Garages), established in 1924, is a British-origin automotive brand renowned for producing the iconic MG series of convertible sports cars. MG sports cars are celebrated for their distinctive design, meticulous craftsmanship, and superior performance. Influence: MG has contributed numerous classics to the global automotive industry, including the creation of 43 world speed records, several industry firsts, and the application of cutting-edge technologies. This not only reflects its century-long racing heritage but also propels the advancement of the global automotive industry.
6
5
Share

What are the steps for nighttime light operations in Subject 3?

Subject 3 nighttime light operations follow these steps: 1. Use low beams when driving on well-lit roads with streetlights. 2. Use low beams when following another vehicle closely in the same direction. 3. Turn on position lights and hazard warning lights when temporarily parked on the roadside. 4. Use high beams when driving on roads without streetlights or with poor lighting. 5. Use low beams when turning, meeting oncoming vehicles, or driving straight through intersections at night. 6. Turn on position lights and hazard warning lights when the vehicle breaks down, obstructs traffic, or is difficult to move at night. 7. Turn on fog lights and hazard warning lights when driving in foggy conditions.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.