How to Deal with Mercedes-Benz 48V Motor Failure?

1 Answers
HazelFitz
07/30/25 7:44am
48V motor is mainly responsible for starting the vehicle and kinetic energy recovery. If it fails, the car cannot be started. If this situation occurs during use, go to the 4S store for inspection and repair as soon as possible. During after-sales maintenance, be sure to ask the after-sales service to issue a formal work order, which can be recorded in the manufacturer's system. Relevant introductions are as follows: 1、Failure: If the Mercedes-Benz 48V motor fails, the car cannot continue to be driven. If the motor does not work, the vehicle cannot be started after turning off the engine. Cars with 48V motors start the engine through this 48V motor, unlike other cars that start the engine through a starter. 2、Timely Repair: After discovering a 48V motor failure, do not turn off the engine. Be sure to go for repair in time, otherwise the vehicle cannot be started and you will have to call a tow truck. When using the car normally, be sure to perform a self-check when starting up, and deal with any problems in time. Do not wait until the vehicle has serious failures before remembering to repair it.
Was this review help?
10
0
Share
More Forum Discussions

What are the length, width, and height of a 13-meter vehicle?

13-meter vehicle length is 13 meters, width is 2.4 meters, and height is 3 meters. Below is relevant information: Definition of vehicle length: Vehicle length is the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and respectively touching the outermost protruding parts at the front and rear of the vehicle. Definition of vehicle width: Vehicle width refers to the car's width. It is the distance between two planes parallel to the vehicle's longitudinal symmetry plane and respectively touching the fixed protruding parts on both sides of the vehicle. Definition of vehicle height: Vehicle height is the distance between the vehicle's support plane and the horizontal plane touching the highest protruding part of the vehicle when it is unloaded (without cargo or passengers) in operating condition.
18
4
Share

What type of suspension does the Baojun 360 have?

The Baojun 360 features a MacPherson strut independent suspension at the front and a torsion beam suspension at the rear. Most vehicles utilize MacPherson strut independent suspension for the front, as it is widely applied due to its simple structure and low cost. Below are details about the Baojun 360's suspension: 1. Vehicles equipped with MacPherson front suspension are typically those with transversely mounted engines. These vehicles have limited lateral space in the engine compartment, leaving insufficient room for more complex suspension systems. The MacPherson suspension consists of only an L-shaped control arm, making it almost space-free in the engine compartment. 2. The torsion beam suspension is a common non-independent suspension type, frequently used in MPVs and compact cars. It is characterized by its simple structure, compact size, and minimal space occupation.
16
4
Share

What are the driving modes of the Hongqi HS5?

The Hongqi HS5 offers Comfort Mode and Sport Mode. Detailed introduction of Comfort Mode: In Comfort Mode, the Hongqi HS5 starts lightly, and with a hard press on the accelerator for rapid acceleration, the push-back feeling is very strong, and the sense of acceleration is obvious. On urban roads, overtaking and lane changing can be done at will. Detailed introduction of Sport Mode:
6
2
Share

Does a new motorcycle require an annual inspection in the first year?

New motorcycles do not require an annual inspection in the first year. The safety technical inspection requirements for motor vehicles are as follows: 1. Passenger vehicles for commercial use: inspected once a year within the first 5 years; after 5 years, inspected once every 6 months. 2. Trucks and large or medium-sized non-commercial passenger vehicles: inspected once a year within the first 10 years; after 10 years, inspected once every 6 months. 3. Small and mini non-commercial passenger vehicles: inspected once every 2 years within the first 6 years; after 6 years, inspected once a year; after 15 years, inspected once every 6 months. 4. Motorcycles: inspected once every 2 years within the first 4 years; after 4 years, inspected once a year.
14
2
Share

How to Remove and Install the Turbocharger on a Great Wall C50?

Before disassembly, make alignment marks between the compressor housing and turbine housing, as well as between the turbine housing and bearing housing. Loosen the compressor housing clamp screws and remove the housing. During removal, you may gently tap around the housing with a wooden hammer or copper rod. Inspect the compressor impeller for any damage. Loosen the turbine housing clamp bolts and remove the turbine housing. After disassembly, check the housing surface for cracks and inspect the turbine blades for damage. Remove the shaft seal sleeve and sealing ring. Verify whether the sealing ring openings are staggered by 180 degrees, and check for wear in the ring groove and any loss of elasticity in the sealing ring.
11
0
Share

What is the range of the Hongqi HS9?

The range of the Hongqi HS9 is 460 kilometers. Introduction to vehicle range: The range of a car refers to the maximum distance that the remaining gasoline in the fuel tank can travel at a relatively economical speed. The continuous driving range under certain road conditions after the fuel tank is full is generally 300 to 500 kilometers for ordinary vehicles, while military vehicles usually reach 600 to 800 kilometers. Factors affecting the range:
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.