···
Log in / Register

How to Deal with Loud Car Door Closing Sounds?

3 Answers
DeTucker
09/06/25 6:04am
Solutions for loud car door closing sounds: If it's a rubber seal issue, it can be resolved by replacing the seal or adding soundproofing materials. Reasons for loud car door closing sounds: 1. Poorly designed door frame sealing strips, possibly with insufficient compression, causing noise when the door frame collides with the body; 2. Loud vibrations from the door panel, possibly due to lack of damping measures on the door; 3. Impact noise from the door lock mechanism. If the noise occurs after driving or using the car for a while, it might be due to reasons like door sagging, which can be fixed by adjusting the door or the lock mechanism. To close the door properly, first gently push or pull the door to about 20 to 30 centimeters from the door frame, then close it firmly.
Was this review help?
3
3
Share
LeJade
09/18/25 5:49am
As a veteran driver with over 30 years of experience, I've personally dealt with the annoyance of loud car doors. Most often, it's due to aged and hardened rubber door seals that can no longer properly cushion the impact of closing, or dry and unlubricated door hinges that creak with every shut. The solution is straightforward: first, inspect the seals for cracks or deformation, applying Vaseline or specialized rubber conditioner if needed to restore suppleness. For hinges, a light spray of WD-40 or lubricant will do—just avoid over-application to prevent dripping. Persistent noise may require adjusting the door latch position for smoother operation. Noisy closures aren't just irritating; they might indicate improper sealing and safety risks, so prompt action is wise. Regular DIY maintenance saves money and extends your car's lifespan. Don't forget to check surrounding components like lights for potential damage.
Was this review help?
1
4
Share
Expand All
RichardRose
11/01/25 6:16am
I usually enjoy fixing things myself, and loud door noises are often caused by gaps in the door frame or hinge issues. First, use a clean cloth to wipe the edges of the door and the contact points on the car body, removing dust and dirt to reduce friction. Then, apply a few drops of engine oil or silicone-based grease to the door hinges, being careful to avoid staining the interior. If the door closes too tightly and makes loud noises, try loosening the screws on the door latch for fine adjustment. If the rubber seals are worn out, order matching replacements online. DIY fixes cost just a few dozen yuan and also enhance the fun of hands-on work. Avoid slamming the door too hard to prevent damage to the car body, and with less noise, driving becomes more enjoyable. Here's a tip: gently pushing the door when closing it can help reduce the impact sound.
Was this review help?
8
1
Share
Expand All
More Forum Discussions

What brand is the engine of the New Baojun RC6?

The engine brand of the New Baojun RC6 is SAIC-GM. The car is equipped with a 1.5T turbocharged engine, with a maximum power of 108 kW, a maximum torque of 245 Nm, a maximum power speed of 5,200 rpm, and a maximum torque speed ranging from 2,200 to 3,400 rpm. In terms of the transmission system, it is paired with a 6-speed manual transmission and a CVT continuously variable transmission. The New Baojun RC6 is a compact SUV launched by Baojun Auto, with dimensions of 4,925 mm in length, 1,880 mm in width, and 1,580 mm in height, and a wheelbase of 2,800 mm. The car's exterior adopts the design concept of 'Interstellar Geometry,' featuring a very stylish overall design, with a fastback silhouette that further highlights its sporty character.
7
5
Share

How to Reset the Tire Pressure Warning Light on the Honda Avancier?

The method to reset the tire pressure warning light on the Honda Avancier is: 1. Start the engine and keep the gear in P position; 2. Select 'Home' on the central control screen to enter the settings interface; 3. Choose the vehicle menu; 4. Select the 'Tire Pressure Monitoring System Calibration' option to complete the calibration. The Honda Avancier is a 5-door, 5-seater midsize SUV with body dimensions of 4858mm in length, 1942mm in width, and 1670mm in height, with a wheelbase of 2820mm. It is equipped with a 1.5T turbocharged engine and a CVT continuously variable transmission, delivering a maximum power of 142 kW and a maximum torque of 243 Nm. The suspension system features MacPherson strut independent suspension at the front and multi-link independent suspension at the rear.
6
2
Share

What are the reasons for the malfunction of the headlight range control?

Prompting a malfunction in the headlight range control is due to a failure in the adaptive cruise headlight steering. Below are the specific details about adaptive cruise headlights: 1. Function: The Adaptive Front-lighting System (AFS) adjusts the direction of the headlight beam according to current driving conditions, moving the beam left or right based on vehicle speed and steering wheel angle. The system works in conjunction with the headlight direction automatic adjustment system to improve visibility during turns and at intersections. 2. Usage: The system starts operating when the vehicle speed exceeds 10 km/h. It can operate within the maximum range of the steering wheel angle. If you do not wish to activate the system, press the "AFS OFF" button to turn it off. To turn it on again, press the same button. When the system is off, the "AFS OFF" indicator on the instrument cluster lights up. If the system malfunctions, the "AFS OFF" indicator on the instrument cluster will flash.
13
1
Share

How many liters of transmission oil does the Sagitar require?

The Sagitar 1.6 requires 4 liters of transmission oil for a standard refill, while 8 liters are needed if using a circulating oil change machine. The oil filler port is located on the right side at the rear of the transmission. It is essential to regularly check the automatic transmission fluid level. The method for checking transmission oil is as follows: 1. Start the engine and warm up the transmission oil to approximately 50°C. Then, move the gear selector through each position, pausing for 2 seconds in each, before placing it in the parking position. At this point, the oil level on the dipstick should be between the maximum and minimum marks. If it is insufficient, promptly add oil of the same quality. 2. For most automatic transmissions, the oil change interval is typically every two years or 40,000 to 60,000 kilometers (refer to the vehicle's manual for specifics). However, it is advisable to change the oil 2,000 to 3,000 kilometers earlier than recommended.
17
1
Share

Why Do Some Cars Have Antennas While Others Don't?

Car antennas are devices that intercept high-frequency radio waves transmitted by broadcasting stations and transmit them to the car's radio, mobile phone, or radio navigation equipment receiver for demodulation. Every car is equipped with an antenna, but the reason some don't have visible external antennas is mainly because certain models use glass antennas. Here are the relevant details: 1. External Antennas: In vehicles produced in earlier years, the in-car radio used manually pulled or electrically retractable rod antennas to receive radio waves, enabling the vehicle to receive radio signals while driving. Since these antennas protrude from the car body, they are more prone to damage when parking in lots or during car washes. 2. Glass Antennas: Also known as hidden antennas, these achieve signal reception by printing conductive lines on the rear windshield. They offer advantages such as low cost, low failure rates, and high reception quality, making them the future trend for car antennas. Glass antennas use metal coatings as antennas, coupling electromagnetic signals through metal patches or printed silver paste, which are then fed to the signal amplifier or radio via tabs.
13
0
Share

Reasons for the Right Front Wheel Crossing the Line in a 90-Degree Turn

The main reason for the right front wheel crossing the line in a 90-degree turn is an incorrect entry angle. Here is a detailed introduction to the techniques for a 90-degree turn: 1. Entering the turn: For a left turn, approach the corner, keeping 300mm from the side line, and enter the turn. 2. Steering: When the left rearview mirror aligns with the inner corner of the turn, turn the steering wheel fully to the left and proceed out of the corner. Before turning, try to drive as close to the outer side as possible. Only start turning inward slowly when the front of the car is about 500~700mm from the opposite side line. 3. Exiting the turn: Align the front of the car with the exit, straighten the steering wheel, and continue forward. While looking ahead, also observe the rearview mirror. When you feel the middle of the car is about to reach the vertex of the corner, slowly straighten the steering wheel and gradually adjust the car's direction until it completely exits the turn, completing the 90-degree turn.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.