How to Deal with License Plate Visibility in Rearview Camera?

What is the solution for the Audi parking brake warning light being on?

Audi parking brake warning light being on can be solved by: 1. Check if the handbrake lever is fully released. If not, the handbrake switch underneath may remain in the on position, or the handbrake may not be pressed to the switch position; 2. Check if there is a lack of brake fluid, and replenish it promptly if necessary; 3. Use a computer diagnostic tool at a 4S shop to detect the issue, perform repairs based on the fault code, and then reset the warning light. Taking the 2020 Audi A6 as an example, it belongs to the mid-to-large-sized car category, with body dimensions of: length 5038mm, width 1886mm, height 1475mm, wheelbase 3024mm, fuel tank capacity 73l, and curb weight 1800kg.

8

3

Share

What are the causes of anti-lock braking system failure?

Anti-lock braking system failure is caused by: 1. Severe wear of brake pads; 2. Low brake fluid level. The functions of the anti-lock braking system are: 1. To prevent vehicle loss of control, increase braking distance, and improve vehicle safety; 2. To enhance the overall braking performance of the vehicle; 3. To prevent wheel lock-up during braking; 4. To ensure the driver can control the direction during braking and prevent rear axle skidding. The working principle of the anti-lock braking system is: During emergency braking, highly sensitive wheel speed sensors installed on each wheel detect wheel lock-up. The computer immediately controls the pressure regulator to release pressure from the wheel's brake caliper, allowing the wheel to resume rotation, thereby preventing wheel lock-up.

5

1

Share

How to Avoid Crossing the Line During Parallel Parking?

Before starting parallel parking, position your vehicle correctly, maintaining a distance of 30-50 centimeters between the right side of the car and the curb. Throughout the process, it's crucial to keep the speed slow and avoid stalling the engine. You'll need to constantly check different reference points in the mirrors while coordinating hand movements. Synchronization between hands and feet is essential.

15

5

Share

What is DSG?

DSG is not a car, but Volkswagen's dual-clutch transmission. Transmissions are divided into: 1. Hydraulic automatic transmission; 2. Mechanical continuously variable automatic transmission; 3. Electronically controlled mechanical automatic transmission. The transmission consists of a transmission mechanism and a transmission control mechanism. The function of the transmission mechanism is to change the value and direction of torque and speed; the function of the control mechanism is to control the transmission mechanism, realize the transformation of the transmission ratio, achieve gear shifting, and achieve speed and torque variation. The working principle of the transmission is to make different gear pairs work inside the transmission through the control mechanism. At low speeds, gear pairs with a large transmission ratio work, while at high speeds, gear pairs with a small transmission ratio work.

5

0

Share

How to Deal with Scratched Side Skirts?

For minor scratches, prevention is key. Protect the paint surface when it is still new, such as by applying a mirror glaze to the body surface. Use a polishing wheel with a polishing enhancer to remove the oxidation layer attached to the car's surface and smooth out fine scratches. This process takes only 30 to 40 minutes. If the scratches on the body have exposed the primer, local touch-up painting is required.

14

3

Share

How long after passing Subject 2 can I schedule Subject 3? How many training hours are required?

You can basically schedule Subject 3 after completing Subject 2. Taking C1/C2 driver's license as an example, scheduling Subject 3 requires completing 22 training hours. Typically, Subject 3 training hours begin after passing Subject 2. According to regulations, a maximum of 4 training hours can be logged per day, so the fastest completion would take one week. According to the rules, the earliest you can schedule Subject 3 is 7 days after passing Subject 2. Additional information regarding Subject 3 and retests is as follows: Requirements for scheduling Subject 3: For first-time applicants of a motor vehicle driver's license or those applying to add a permitted vehicle type, applicants scheduling Subject 3 must meet the following requirements: For low-speed trucks, three-wheeled vehicles, wheeled self-propelled machinery, trolleybuses, or tram permitted vehicle types, the test can be scheduled 20 days after obtaining the driving skill test permit; for small cars, small automatic transmission cars, or small automatic transmission cars for the disabled permitted vehicle types, the test can be scheduled 30 days after obtaining the driving skill test permit; for large buses, tractors, city buses, medium buses, or large trucks permitted vehicle types, the test can be scheduled 40 days after obtaining the driving skill test permit. Retest requirements: Each subject test can be taken once, and those who fail can retake it once. If the retest is not taken or is failed again, the current test session ends, and the applicant must schedule the test again. However, Subject 2 and Subject 3 tests can only be scheduled 10 days later. If the Subject 3 safe and civilized driving knowledge test is failed, the passed road driving skill test scores remain valid.

6

4

Share

How to Deal with License Plate Visibility in Rearview Camera?

What is the solution for the Audi parking brake warning light being on?

What are the causes of anti-lock braking system failure?

How to Avoid Crossing the Line During Parallel Parking?

What is DSG?

How to Deal with Scratched Side Skirts?

How long after passing Subject 2 can I schedule Subject 3? How many training hours are required?

What Does the Elephant Sign on Highways Represent?

What are the differences between U.S. POLO and Chinese POLO?

How to Deal with Flooded Cars in Henan?

How to Repair Scratches on Car Door Plastic?