···
Log in / Register

How to Deal with Insufficient Engine Oil Pressure in a Car?

3 Answers
PaisleeLynn
09/03/25 5:12am
Methods to deal with insufficient engine oil pressure: 1. If the oil level in the oil pan is too low, it is necessary to add engine oil; 2. If the sensor or oil pressure gauge is damaged, it needs to be repaired at a professional auto repair shop; 3. If the oil filter is clogged, it needs to be cleaned; 4. If the oil pressure relief valve is faulty or the oil pressure spring is too soft, a new pressure spring needs to be replaced. Engine oil, also known as engine lubricant, plays roles such as lubrication and friction reduction, auxiliary cooling, sealing and leakage prevention, rust and corrosion prevention, and shock absorption in the engine. Engine oil consists of two parts: base oil and additives. The base oil is the main component of the lubricant, determining its basic properties, while the additives compensate for and improve the shortcomings of the base oil, endowing it with certain new properties, making them an important part of the lubricant.
Was this review help?
19
1
Share
DiCaleb
09/15/25 6:44am
I've been driving for many years and have encountered quite a few issues with insufficient oil pressure, usually caused by either low oil levels or dirty oil. First, check the dipstick yourself to see if the oil level is within the normal range. If it's low, quickly add some suitable engine oil. If the oil quality is poor, it might contain impurities that clog the oil passages, making it especially important to change the oil and filter. My previous car suffered from a worn-out oil pump due to not changing the oil regularly, resulting in low pressure. The mechanic said the oil pump was broken and needed replacement, which was quite expensive. Additionally, a faulty sensor might falsely indicate low pressure, which requires professional tools to diagnose. In short, if the warning light comes on, stop and check immediately—don't keep driving to avoid overheating the engine and damaging more parts. Developing a habit of checking the oil monthly can prevent many problems.
Was this review help?
14
1
Share
Expand All
LaCarlos
10/29/25 7:21am
I just bought a car recently, and one day the dashboard showed low oil pressure, which really scared me. I quickly pulled over to check the engine compartment and found that the oil level was indeed low. I thought just adding some oil would do, but I wasn’t sure, so I had to call a car-savvy friend for advice. My friend said it might be due to a clogged oil passage or aged oil quality and suggested I try changing the oil first. After replacing the oil and filter, the issue seemed to be resolved. However, my friend reminded me that if it’s a problem with the oil pump or internal engine wear, I should take it to a professional repair shop to avoid turning a small issue into a big one. Insufficient oil pressure is no small matter—it’s crucial for proper engine lubrication, and long-term neglect could lead to costly major repairs. Now, I pay more attention to regular maintenance.
Was this review help?
4
5
Share
Expand All
More Forum Discussions

What is the horsepower of the Porsche 718?

The entire lineup is equipped with two turbocharged engines: a 2.0T and a 2.5T, with power parameters varying according to the model, as follows: 1. The Cayman 2.0T has a maximum horsepower of 250 hp, while the Cayman T, also with a 2.0T engine, can reach 300 hp. 2. The Boxster S 2.5T has a maximum horsepower of 350 hp, and the Boxster GTS reaches up to 366 hp. Here are more details about the Porsche 718: 1. The Porsche 718 is Porsche's entry-level sports car, available in two styles: the sports coupe Porsche Cayman and the convertible Porsche Boxster. 2. The Porsche 718 has body dimensions of 4379mm in length, 1801mm in width, and 1276mm in height, with a wheelbase of 2475mm.
3
2
Share

What is the correct installation method for the Fengjun 5 flywheel?

Great Wall Fengjun 5 flywheel installation method: 1. Adjust the crankshaft pulley to the first cylinder. 2. There is a letter next to the flywheel screw, align the T mark upwards and match the point on the back of the flywheel with the point on the crankshaft to complete the installation. Below is more information about the Great Wall Fengjun 5: 1. The Great Wall Fengjun 5 adopts a family-style grille design and is equipped with ABS+EBD, reverse radar, 120km/h overspeed warning, multifunction steering wheel, leather seats, etc. 2. The Fengjun 5 is powered by a GW4D20E 2.0T diesel engine with maximum power outputs of 75kW (102PS) and 105kW (143PS), and peak torque of 225N•m and 315N•m.
13
0
Share

Can the S gear be used at a speed of 120 km/h?

It is possible to shift to the S gear when driving at 120 km/h, but there is no need to keep it in S gear all the time. Correct approach: When driving on the highway without the need for strong acceleration, you can choose to use the D gear for normal driving. If you need to accelerate quickly or overtake, you can directly shift to the S gear and then return to the D gear after completing the overtaking. Reasons why it's unnecessary: The S gear is the sports mode of the car. In this mode, the transmission can shift freely, but the shift timing is delayed, keeping the engine at high RPM for a longer time, allowing the car to run at low gear and high RPM for an extended period, thereby achieving greater torque output and acceleration. However, the S gear only delays upshifting without changing other operational aspects, which inevitably increases the transmission load and temperature in the short term, leading to accelerated wear. Therefore, try to avoid using the S gear for extended periods. In terms of fuel consumption, since the fuel injection increases at high RPM, the S gear mode consumes significantly more fuel than the normal mode. Generally, the S gear is used for overtaking and climbing, where the car's performance will be more effortless and decisive. Prolonged use of the S gear will obviously increase fuel consumption, so when driving on the highway and needing to overtake, you can shift to the S gear. Precautions for the S gear: The best choice when going downhill is to shift to the S gear. Especially when the downhill distance is long and steep, shifting to the S gear can utilize engine braking to avoid continuous braking, which might lead to brake failure.
5
0
Share

What does it mean when 4lo flashes and the engine light comes on simultaneously?

When the 4lo indicator light on the vehicle's dashboard flashes and the engine malfunction light comes on simultaneously, it indicates that both the low-speed four-wheel drive system and the engine have encountered faults, requiring immediate repair. The causes and solutions are as follows: Causes: When the car's engine malfunctions, the engine malfunction light illuminates. Upon detecting an anomaly, the vehicle's system activates the 4lo indicator light. Engine faults are typically caused by carbon buildup and insufficient combustion. Over time, carbon deposits inevitably accumulate inside the engine, altering its designed parameters. These deposits are unstable and retain heat, which can lead to uncontrolled ignition, causing engine knocking. In such cases, the engine malfunction light will turn on. Poor engine combustion is another primary reason for the engine malfunction light. In automotive design, to ensure the engine operates optimally and maintains its intended lifespan, an oxygen sensor is installed to monitor combustion conditions. Poor combustion not only pollutes the environment but also leads to fuel wastage and excessive engine wear. Solutions for the 4lo and engine malfunction lights: Switch between high-speed and low-speed four-wheel drive modes several times, pressing the accelerator pedal during the process. Disconnect the battery's negative terminal for 5-10 minutes and attempt to use the vehicle's built-in repair system. Inspect the ABS sensor connectors on the front and rear wheels and ensure the transfer case connector for the four-wheel drive is securely fastened. Reset the fault unit by short-circuiting the 4th and 12th terminals of the OBD interface for 10 seconds, simultaneously clearing the fault codes. Check the exhaust system and the catalytic converter for blockages. Read the engine control unit's fault codes to identify any malfunctioning components in the system. Observe whether the engine exhibits any abnormalities during operation. Visit a repair shop or dealership to use a diagnostic scanner to read specific fault codes and proceed with the necessary repairs based on the findings.
8
3
Share

Which type of engine oil is suitable for Buick Verano maintenance?

Buick Verano maintenance considerations include maintenance intervals and maintenance items. The maintenance intervals for Buick Verano and the first maintenance items are as follows. Buick Verano maintenance intervals: The maintenance interval for Buick Verano is 5,000 kilometers or six months. Car maintenance is required when either of these two conditions is met. Buick Verano first maintenance items: Check tire condition and adjust pressure; inspect lighting system operation; inspect windshield wiper and washer operation, check wiper blade wear, inspect exterior body and underbody protective components; inspect condition of various control belts; adjust clutch pedal height and travel; check and tighten chassis screws; clean air filter element.
12
4
Share

How many kilometers should the spark plugs of Ford Mondeo be replaced?

The replacement cycle for spark plugs in the Ford Mondeo is 30,000 kilometers. The original engine uses NGK spark plugs, model LTR6AI-8. Spark plug replacement cycle: Under normal maintenance conditions, replace them when driving 40,000 to 60,000 kilometers. However, due to differences in brands and engines, it may vary. It is recommended to follow the user manual. You can refer to the following standards for maintenance replacement: Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, remove the high-voltage distributor wires, and mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. When removing them, check if there are any leaves, dust, etc., on the outside and make sure to clean them thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it. Install the removed high-voltage distributor wires according to the ignition sequence, and snap the cover back on.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.