How to Deal with Idle Start-Stop System Malfunction?

What is the normal tire pressure generally?

According to the provisions and requirements of the international GBT2978-2008 standard, the normal tire pressure range is as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: should not exceed 3.5bar. Hazards of excessive tire pressure: The friction and adhesion of the tire will decrease, affecting braking performance; It can cause steering wheel vibration and deviation, reducing driving comfort; Accelerates the local wear of the tread pattern in the central part of the tire, reducing tire lifespan; Increases vehicle body vibration, indirectly affecting the lifespan of other components; Excessive tension deformation of tire cords can occur, reducing the elasticity of the tire body and increasing the load on the vehicle during driving; Decreases puncture resistance. When encountering sharp objects such as nails or glass on the road, they can easily penetrate the tire, and impacts can cause internal cracks and explosions, leading to tire blowouts.

10

5

Share

What are the length, width, and height of the GAC Trumpchi GS4?

The body dimensions of the Trumpchi GS4 are 4525mm in length, 1852mm in width, and 1682mm in height, according to official data. The length of the Trumpchi GS4 refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding points at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding points on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and its supporting plane. The Trumpchi GS4 is powered by a 1.3T/1.5T turbocharged engine, with the 1.3T engine delivering a maximum power of 101kW and a maximum torque of 202Nm, paired with a 5-speed manual or 7-speed dual-clutch transmission. The 1.5T engine produces a maximum power of 112kW and a maximum torque of 235Nm, matched with a 6-speed manual or 7-speed dual-clutch transmission. National regulations stipulate specific dimensions for vehicles. According to the national standard "GB1589-89," the total width of a vehicle excludes side mirrors. The limitation on vehicle width is intended to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data lies in ensuring adequate space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.

14

0

Share

Is it better to learn automatic or manual transmission?

It varies from person to person. Manual transmission cars are much more complex than automatic ones, and due to the higher difficulty in learning manual transmission, the pass rate for the driving license test is also lower. Below are the differences between manual and automatic transmission: Learning duration: Manual transmission cars are more complex than automatic ones, so the learning period differs. Typically, learning manual transmission takes at least one month longer than automatic, and due to the higher difficulty, the pass rate for the driving license test is also lower. Driving license acquisition: A manual transmission license is classified as C1, while an automatic transmission license is classified as C2. Holders of an automatic transmission license cannot drive manual transmission cars, but holders of a manual transmission license can drive automatic transmission cars. Cost: Because manual transmission is more difficult to learn and has a lower pass rate, its fees are generally cheaper compared to automatic transmission. Typically, the cost of learning automatic transmission is more expensive.

11

1

Share

What to do if the Geely Vision X3 automatic transmission stalls at startup?

Develop the habit of warming up the engine before starting a cold car. After getting in the car, rotate the key to turn on the power, wait about 5-10 seconds before ignition, and let the engine warm up for 30 seconds before starting. If the car body no longer feels shaky, stalling will not occur. Introduction to the Geely Vision X3: The Geely Vision X3 is positioned as an A0-class SUV. It adopts the latest family design language, with the water ripple grille offering high recognition. Engine of the Geely Vision X3: The Vision X3 is equipped with a 1.5L naturally aspirated engine. The new Vision X3 is positioned as a compact SUV.

4

5

Share

Do you pay when picking up the car after purchase?

Car 4S shops require a deposit first, then vehicle inspection, and the remaining balance is settled after inspection. Check the manufacturing date: You can look at the nameplate in the engine compartment. The nameplate is stamped once and includes the car's serial number, engine displacement, model, brand, etc., as well as the important specific manufacturing date. If the manufacturing date is too far from the pick-up date, it is not recommended to take the car, as it may be a stock vehicle. Check the mileage on the odometer: Generally, a mileage of less than 30 km is reasonable. If it exceeds this number, the car may have been test-driven by too many people or used for other purposes before. Inspect the exterior: Focus on observing the gaps between the bumper and the body, the door gaps, and the gaps between the front and rear bumpers. Face the sunlight at an angle and observe from multiple angles to ensure the paint surface is free from damage or repair marks.

7

1

Share

Are there shared e-bikes in Beijing?

Beijing has shared bikes, including brands like Mobike, Bluegogo, Hello Bike, and Ofo. Here is some related information: 1. Advantages of shared bikes: They contribute to a better environment as bicycles are zero-pollution and zero-emission. If everyone switched to bicycles for travel, the country's environment would see significant improvement. They also promote better health for people. Shared bikes make travel more convenient in today's congested roads where walking might be faster than taking a car, but cycling is even faster and less affected by road conditions, thereby improving travel efficiency and making life easier. 2. Disadvantages of shared bikes: Since the bikes are shared and available to everyone, in densely populated areas with high bike usage, it can be difficult to find an available bike. Poor management of shared bikes can indeed cause significant damage to the city's appearance and may even harm the public environment, occupying spaces originally meant for citizens' leisure and entertainment.

14

0

Share

How to Deal with Idle Start-Stop System Malfunction?

What is the normal tire pressure generally?

What are the length, width, and height of the GAC Trumpchi GS4?

Is it better to learn automatic or manual transmission?

What to do if the Geely Vision X3 automatic transmission stalls at startup?

Do you pay when picking up the car after purchase?

Are there shared e-bikes in Beijing?

What car has a V-shaped logo?

Can the sidewall of a tire be repaired with hot vulcanization?

Which listed company does Hongqi belong to?

Is the Aventador the 'Big Bull'?