How to Deal with High Transmission Fuse Temperature?

1 Answers
TuckerMarie
07/29/25 1:22pm
To address excessive transmission temperature, first pull the vehicle over to allow the transmission temperature to gradually decrease. Check if the transmission's radiator fan is functioning properly and inspect whether the coolant and transmission fluid are at adequate levels. After these checks, once the transmission temperature returns to normal and the dashboard warning light turns off, you may continue driving. The causes of transmission overheating are as follows: 1. High engine and coolant temperature: Prolonged engine overload can increase coolant temperature, thereby affecting transmission cooling; additionally, insufficient coolant in the radiator reduces the cooling system's effectiveness, leading to transmission overheating. 2. Transmission clutch slippage: Clutch slippage generates additional heat, raising transmission temperature and degrading transmission fluid quality, which increases transmission wear. 3. Thermostat sticking: If the transmission's thermostat sticks, the fluid cannot circulate into the cooling system, preventing heat dissipation. 4. Insufficient transmission fluid: Low transmission fluid levels increase gearshift jerkiness and reduce cooling efficiency, causing temperature rise and potential internal component damage. 5. Clogged radiator grille: A blocked grille prevents timely heat dissipation, leading to increased transmission temperature.
Was this review help?
20
2
Share
More Forum Discussions

How to Start a Camry?

Camry starting steps are: power on, press the foot brake, ignite, wait for the car self-check and warm-up (about 20 seconds), shift gear (D or R), release the handbrake, slowly release the foot brake, start moving and then slowly apply the throttle, and start. Starting must first press the brake, press the ignition to start, then shift out of P gear (to R or D gear), press the electronic brake, release the foot brake, and apply the throttle to start. Taking the eighth-generation Camry as an example, its advantages are a grand appearance, user-friendly functions, improved electric seats and sound effects, a nice dark blue atmosphere on the dashboard, very practical sunshades that enhance the taste, practical headlight cleaning, and excellent acceleration performance.
6
2
Share

Will the Safety Officer Intentionally Fail You in the Driving Test Part 3?

The safety officer will not intentionally fail you in the driving test part 3. The role of the safety officer is to prevent dangerous situations with the motor vehicle. When the motor vehicle is about to lose control, the safety officer will take measures to control it, which has no impact on the driving license test part 3. Some safety officers do not speak to the examinee during the test. Below are the details about the driving test part 3: 1. The road driving skills test in part 3 generally includes: preparation before getting on the vehicle, simulated light test, starting, driving in a straight line, shifting gears, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, etc. 2. The safe and civilized driving knowledge test in part 3 includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and knowledge of handling after traffic accidents.
7
1
Share

How to remotely open the windows of the Haval H6?

The method to remotely open the windows of the Haval H6 is: Press and hold the unlock button to achieve the one-touch window opening function; press and hold the lock button to close all windows with one touch. Precautions for using the windows include: Clean the window glass. Dirty window glass not only affects appearance and visibility but also hinders the opening and closing of the power windows. To prevent rainwater from entering the car, the upper edge of the window frame is equipped with a rubber strip, which frequently contacts the glass. Dirty glass increases friction with the rubber strip, affecting window operation, so it's essential to keep the glass clean. The Haval H6 is an urban smart SUV with dimensions of 4640mm in length, 1825mm in width, and 1690mm in height, a wheelbase of 2680mm, a fuel tank capacity of 58 liters, and a curb weight of 1675kg. The front suspension system of the Haval H6 is a MacPherson independent suspension, and the rear suspension system is a double-wishbone independent suspension.
2
0
Share

Are Red and Green Antifreeze the Same?

Red and green antifreeze are not the same. Antifreeze containing glycerol appears red in color; if it contains ethylene glycol, the color is green; and if the color is blue, the component is propylene glycol. The primary function of antifreeze is to prevent the freezing of vehicle fluids under low-temperature conditions. Additionally, antifreeze helps prevent the aging and rusting of vehicle components. During cold winters, antifreeze ensures that the fluids do not freeze, making it easier to start the car. In summer, even though temperatures rise, antifreeze remains essential to prevent potential engine damage such as cylinder seizure.
6
4
Share

Where is the VIN located on the Land Rover Range Rover Sport?

The VIN of the Land Rover Range Rover Sport is located on the platform in front of the spare tire, under the carpet, and the tire needs to be removed first. The last 6 digits of the VIN represent the production sequence number. Generally, the VIN can be found on the left side of the dashboard, the lower left corner of the front windshield, the door hinge pillar or door lock pillar, or in the engine compartment. The VIN can also be found in the vehicle registration document under the VIN section or on the insurance policy. The location of the VIN may vary depending on the vehicle model. In terms of dimensions, the Land Rover Range Rover Sport measures 5000mm in length, 2073mm in width, and 1869mm in height, with a wheelbase of 2922mm. It is a 5-door, 5-seater SUV.
4
3
Share

What Causes Steering Wheel Vibration at Idle Speed?

The causes of steering wheel vibration at idle speed are: 1. If the vibration amplitude is not significant, it is generally caused by resonance, which has little impact on vehicle usage. It is necessary to check whether there are issues with the rubber bushings of the steering wheel transmission device or if the bolts securing the steering wheel transmission device are loose. 2. Unstable oil pressure. If the fuel pump's supply pressure is abnormal or the intake pressure sensor's readings are incorrect or malfunctioning, it can cause body vibration. The solution is to check the oil pressure and replace components if necessary. 3. Check whether the steering wheel vibration is related to the engine idle speed or the steering gear. Vibration may also occur when the steering wheel is turned to its limit, sometimes accompanied by abnormal noises, mostly due to steering gear pressure relief or air resistance in the power steering fluid.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.