How to Deal with High Tire Pressure Alarm?

2 Answers
OscarRose
07/25/25 2:53pm
Methods to handle high tire pressure alarm: Unscrew the plastic cap of the tire valve, gently press the center of the valve with an object like a chopstick, and you will hear the sound of air escaping and feel the air being released. Release to stop. While releasing air, use a tire pressure gauge to check the actual tire pressure against the tire pressure label on the side of the tire until it meets the standard. Hazards of excessive tire pressure: 1. The friction and adhesion of the tire will decrease, affecting braking performance, causing steering wheel vibration and deviation, reducing driving comfort, accelerating the moderate elongation deformation of the tire tread, and reducing the elasticity of the tire body. This increases the load on the car while driving and reduces its resistance to punctures. 3. When encountering sharp objects such as nails or glass on the road, they can easily penetrate the tire, causing internal cracks and bursts, leading to a blowout.
Was this review help?
8
0
Share
LaBlakely
08/11/25 9:15pm
Last time I was driving when suddenly the tire pressure warning light came on, my heart skipped a beat. I immediately slowed down and pulled over to a safe spot. Don't panic—this is the first step in handling the situation. After getting out of the car, I felt the tires and they seemed normal in temperature. Using a portable tire pressure gauge I always carry, I checked and sure enough, the pressure was a bit high, probably due to the hot weather. I carefully released some air until the pressure dropped to the recommended value on the car's label. Then, I wiped the tire surface clean with a tissue to check for any foreign objects or bulges. Confirming everything was fine, I started the car and waited for the warning light to reset—it usually goes off after driving for a few minutes. I've made it a habit to check my tire pressure every two weeks to avoid overinflation or to inspect before long trips. This helps prevent warnings and ensures safer driving. After all, tire maintenance is simple but crucial—neglecting small things can lead to big troubles.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

What does it mean when the 4lo light flashes?

The flashing 4lo warning light indicates that the vehicle has entered the low-speed cruise control system. When this light illuminates, it is necessary to consult a professional who can use a diagnostic scanner to read the fault code and identify the root cause of the issue for targeted repairs. After completing the repairs, the fault code should be cleared. The working principle of the cruise control system can be simply described as follows: The cruise control module reads the pulse signal from the vehicle speed sensor and compares it with the preset speed. Based on this comparison, it sends commands to the servo mechanism to adjust the throttle opening, either increasing or decreasing it, to maintain the vehicle at the set speed. Solutions for the flashing 4lo light: Switch between high-range and low-range 4WD modes, and during the switching process, press the accelerator pedal a few times. Firmly press the ABS sensor connectors near the front and rear wheels and the 4WD transfer case connector located under the middle of the vehicle. For professional repair, visit a repair shop to use a diagnostic scanner to read the specific fault code and proceed with the necessary repairs. Alternatively, move the lever by pressing the brake, shifting into neutral (N), and then lifting the first of the four levers in front of the center console from left to right for three seconds.
10
5
Share

What brand of tire is GOODYEAR?

GOODYEAR is the Goodyear brand tire. The following is a detailed introduction to car tire replacement: 1. Replacement time depends on the situation: If the owner has good driving habits, the tire replacement time is generally 3-5 years or a mileage of 60,000-80,000 kilometers. If driving under more severe road conditions, such as frequently driving on gravel roads or frequent traffic jams, sudden braking, and sharp turns, the replacement time for tires will be shortened. 2. Tire aging time: The main raw material of tires is rubber, which will naturally age. The main manifestations are that the tires will harden, and the sidewalls will be covered with small cracks. Generally, the natural aging time is 4-5 years. Tires need to be replaced in time after 5 years of use to prevent the risk of blowouts. 3. Observe the wear condition of the tires: If the tires are severely worn and the tread pattern is at the same level as the wear mark, the tires need to be replaced. Otherwise, braking will be more difficult when driving on slippery roads, and the vehicle is extremely prone to losing control. If driving on too rough roads, blowouts are likely to occur.
14
5
Share

What does the J value of a wheel hub mean?

Wheel hub J value refers to the width of the wheel rim. The following are specific details about automotive wheel hubs: 1. Working principle: The wheel hub bearing unit works in conjunction with the bearing unit and the anti-lock braking system. The wheel hub unit is designed with inner and outer flanges, where the inner flange is bolted to the drive shaft, and the outer flange holds the entire bearing assembly together. 2. Impact of wear: Worn or damaged wheel hub bearings or wheel hub units can lead to costly failures during vehicle operation and may even pose safety hazards. 3. Upgrade methods: The most common methods for upgrading automotive wheel hubs include switching to aluminum alloy rims or using larger wheel hubs to enhance vehicle performance and appearance.
7
2
Share

What are the PRND letters on a car's gear shift?

The following is a detailed introduction to the specific functions of the P, R, N, and D gears in a car: 1. P gear (Parking gear): When the gear shift lever is in the P position, the transmission is in neutral internally, but the output shaft is mechanically locked. At this time, the car will remain stationary even without applying the brakes. It is generally used for long-term parking. When engaging P gear, the car must be completely stationary. Do not engage P gear before the car has come to a complete stop, and always apply the handbrake. When parking on a slope, first apply the handbrake before engaging P gear. 2. R gear (Reverse gear): When the gear lever is in the R position, the rotation direction of the transmission's output shaft is opposite to that of the engine, allowing the car to move backward. When engaging R gear, the car must be completely stationary. Do not engage R gear before the car has come to a complete stop. 3. N gear (Neutral gear): When the gear lever is in the N position, the gears inside the transmission are in a freewheeling state, and the clutch is not engaged, resulting in minimal load on the transmission. N gear is generally used for short-term parking, such as waiting at a red light, and the transmission should also be placed in N gear when the car is being towed. 4. D gear (Drive gear): When the gear lever is in the D position, the gears inside the transmission automatically switch between the lowest and highest gears based on factors such as vehicle speed and throttle opening, following the preset shifting pattern. In most cases, D gear can be used for driving.
12
5
Share

Can traffic violations be handled on the Traffic Management 12123 app?

Traffic violations can be handled on the Traffic Management 12123 app. After a motor vehicle commits a violation, it usually takes 3-7 days to be queried or receive an SMS notification. You can log in to the traffic bureau website where the vehicle is registered to check the details. The scope of violations that can be handled on the Traffic Management 12123 app includes: Non-site violations for vehicles registered under your name or non-personal vehicles that have been filed; Non-site violations that result in a warning or a fine of 200 yuan or less, with a penalty score of 6 points (inclusive) or below; Non-site violations with penalty points for non-personal vehicles that have been filed can only be handled if they occurred after the filing date. The steps to handle traffic violations are as follows: After logging into the "Traffic Management 12123" app, enter the violation handling page through the business center to start the violation handling process; Select the vehicle with pending violations, then enter the list of unprocessed violations. Click on the corresponding violation record to view detailed information about the violation; After selecting the pending violation record, click "Handle and Pay," carefully read the violation handling instructions, and click "Read and Agree" to proceed to the confirmation page for the pending violation record and payment method selection; After clicking "Confirm," proceed to the payment page and complete the payment. At this point, the violation handling process is complete.
3
0
Share

What to Do When There Are Water Droplets and Fog Inside Car Headlights?

Specific methods for removing moisture from car headlights are as follows: 1. Mild moisture: You can turn on the headlights, and the fog will be expelled through the vent pipe along with the heat, causing minimal damage to the headlights. The main reason for moisture inside headlights is the aging of the headlight sealing ring or damage to the headlight due to a collision in the nearby area, allowing water to enter and turn into steam when heated. It is necessary to visit a repair shop and have professionals remove the headlight for repair. 2. Severe moisture: You need to go to a 4S shop to remove the moisture and have it inspected and repaired.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.