How to Deal with High Fuel Consumption in Haval H6?

What are the reasons for insufficient starting power of the Baojun 510?

The reasons for insufficient starting power of the Baojun 510 are as follows: 1. It may be caused by problems with the engine or transmission, which is a fault-related issue leading to weak starting power and requires timely troubleshooting; 2. It could also be due to the vehicle's small displacement and heavy load, where the starting speed may not reach the boost level, resulting in a feeling of weak starting power, which is a normal phenomenon. The specific reasons for insufficient starting power are as follows: 1. Engine: Carbon buildup is a major culprit causing insufficient engine power and weak starting. Carbon buildup on the throttle valve affects the intake volume; buildup on the spark plugs affects ignition; buildup on the fuel injectors affects fuel injection, and overheated carbon buildup can cause detonation, leading to weak starting power. Therefore, it is advisable to clean the engine's carbon buildup first before looking for other possible causes of weak starting power. 2. Transmission: Clutch failure in the transmission can lead to weak starting power. The clutch's role is to transmit and cut off the engine's power. Manual transmissions, dual-clutch transmissions, etc., use friction plate clutches. Over time, the friction plates wear out severely, causing slippage, which in turn leads to weak starting power.

10

2

Share

What is the appropriate light transmittance for car window films?

According to the industry standard "CB/31849-2015 Automotive Film Glass", the front windshield requires a light transmittance of 70%, which meets national regulations for base materials. High-quality explosion-proof films should feature eco-friendly materials, high clarity, excellent explosion-proof performance, strong heat insulation, and effective UV blocking. Premium films can achieve up to 90% light transmittance and heat insulation rates, with UV blocking rates no less than 98%. Below is extended information about car window film light transmittance: 1. The front windshield is the main area exposed to sunlight, and proper films can effectively prevent tanning and interior fading. Always choose certified films. 2. Car window film light transmittance refers to the phenomenon where light is blocked by the glass and reflected at certain angles, known as "reflection", measured by reflectance. When light passes through the glass, part of its energy is lost, known as "absorption", measured by absorption rate.

3

2

Share

How to Transfer the Old Car ETC to a New Car?

The method to transfer the old car ETC to a new car is as follows: the car owner should bring the vehicle license and ID card, fill out a change form, remove the ETC device, then go to the purchase location for re-matching, visit an ETC service point to process data changes, install the old ETC on the new car, and reactivate it. The ETC activation process is: Insert and remove the ETC card twice in succession until the electronic tag screen displays "Bluetooth is on". If inserting and removing twice without attaching the electronic tag shows "Tag invalid", it is a normal phenomenon and does not affect activation. Alternatively, you can directly press the button on the top of the electronic tag to enable the Bluetooth function. Turn on the phone's Bluetooth, open the corresponding mobile app (usually there is a download QR code on the electronic tag), and enter the device activation interface. Click on device connection and wait patiently for the "Connection successful" prompt. After successful connection, upload a photo of the vehicle's front to complete the activation.

11

3

Share

How to Cancel the Low Tire Pressure Warning Light?

Adjust the tire pressure to the standard level, then drive for a while, and the low tire pressure warning light will usually cancel automatically. Hazards of Low Tire Pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes heavy steering and tendencies to drift, which are factors detrimental to driving safety; Increases movement in various parts of the tire, leading to excessive rolling and abnormal heat generation; Reduces the functionality of the cord and rubber, causing delamination or cord breakage, excessive friction with the rim, resulting in damage to the bead area and abnormal wear; Multiplies the friction between the tire and the ground, causing a sharp rise in tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to a blowout; Increases tire body deformation, making the tire side prone to cracking, while generating flexing motion, leading to excessive heat, accelerating rubber aging, fatigue of the cord layer, cord breakage, and also increases the tire's contact area with the ground, accelerating shoulder wear.

17

2

Share

How to Deal with Rainwater Entering Through Unclosed Car Windows?

Here are the methods to handle rainwater entering the car: 1. If a small amount of water enters, it indicates minimal impact. Avoid turning on any electronic devices inside the car to prevent short circuits caused by water exposure. Use the key to open the car door, and if it's still raining, cover the vehicle with an umbrella or waterproof cloth. Then, proceed directly to a 4S shop for drying treatment. 2. If rainwater has seeped into the carpets or floor mats, remove them for cleaning and air-drying. Additionally, perform a thorough disinfection inside the car to prevent lingering odors. Important notes: 1. Wet seats may develop mold; avoid using a hot air blower to dry them. If the seats have a heating function, you can use it to speed up water evaporation. After air-drying, apply a leather cleaner and polish. For sponge seats, you can dismantle them entirely to air-dry the inner sponge. 2. Do not fully immerse the carpets in water for scrubbing, as this can damage the adhesive layers between different materials inside the carpets and prolong the drying time, affecting their usability and causing dampness inside the car.

14

4

Share

What are the differences between Audi S4 and A4?

Audi S4 and A4 differences are as follows: 1. The Audi S4 is based on the dream version of the Audi A4, an all-wheel-drive and sport suspension upgraded version with more powerful performance. The 'S' can be understood as 'super,' meaning the S4 is essentially a super version of the A4. 2. Exterior: Compared to the A4, the Audi S4 has a more aggressive design, featuring a hexagonal 'big mouth' grille with chrome treatment, large air intakes on both sides, and a sharp-edged bumper. 3. Interior: The interior design is quite similar, with continuous air vents and an 8.3-inch touchscreen. The S4 uses higher-quality materials, including extensive Nappa leather and Alcantara, accented with red stitching for a more sporty feel. 4. Dimensions: Both cars are mid-sized sedans. The S4 measures 4749mm in length, 1842mm in width, 1400mm in height, with a wheelbase of 2831mm. The A4 measures 4750mm in length, 1842mm in width, 1433mm in height, with a wheelbase of 2828mm. The A4 is 1mm longer and 33mm taller than the S4, while the S4 has a 3mm longer wheelbase than the A4. The S4 is a 4-door, 5-seat sedan, while the A4 is a 5-door, 5-seat station wagon.

15

2

Share

How to Deal with High Fuel Consumption in Haval H6?

What are the reasons for insufficient starting power of the Baojun 510?

What is the appropriate light transmittance for car window films?

How to Transfer the Old Car ETC to a New Car?

How to Cancel the Low Tire Pressure Warning Light?

How to Deal with Rainwater Entering Through Unclosed Car Windows?

What are the differences between Audi S4 and A4?

What is the difference between hybrid and fuel-powered vehicles?

Why is the high pressure of car air conditioning so high?

What items should a new car be equipped with?

Is it still necessary to display the vehicle environmental protection label?