How to Deal with High Fuel Consumption?

2 Answers
OAbigail
07/25/25 11:39am
Here are the methods to address high fuel consumption in cars: 1. Replace tires promptly: When tires are severely worn, the tread becomes smooth, reducing friction. This makes the car more prone to slipping while driving, which increases fuel consumption. Car owners should be aware of the service life or recommended mileage for their tires and replace them promptly when noticeable slipping occurs. 2. Get timely inspections at a 4S shop: If the bearings or braking system malfunction, the tires may not work properly, leading to increased fuel consumption. Issues with bearings and brakes often manifest through symptoms such as unusual noises from the tires. In such cases, car owners should consider these possibilities and promptly visit a 4S shop for inspection.
Was this review help?
8
0
Share
AllisonAnn
08/11/25 8:05pm
I've been driving the family car for five years now. At first, the fuel consumption was shockingly high, with gas expenses taking up a significant portion of my monthly budget. So, I started with the basics: checking if the tire pressure met the standard because underinflated tires increase rolling resistance, wasting fuel unnecessarily. If the air filter is too dirty, the engine struggles to breathe, affecting performance and leading to higher fuel consumption. Also, a loose fuel cap can cause gasoline to evaporate, resulting in noticeable losses. I bought a tire pressure gauge and air filters myself, checking them monthly and replacing them when needed—it only costs a few dozen yuan to do it myself. When driving, I avoid sudden acceleration and hard braking, maintaining a steady speed for maximum fuel efficiency. After forming these habits, I save over ten liters of fuel each month, making it much more economical. I also pay attention to the car's weight, avoiding unnecessary clutter—keeping it lightweight makes the engine's job easier. In short, beginners should start with basic checks and gradually optimize—fuel consumption will naturally improve.
Was this review help?
7
0
Share
Expand All
More Forum Discussions

What Causes Unstable Engine Idling?

Reasons for unstable car idling: 1. Intake manifold leakage—when unauthorized air, fuel vapor, or exhaust gases enter the intake manifold, causing the air-fuel mixture to become too rich or too lean, leading to unstable idling. 2. Excessive carbon buildup in the throttle body—carbon deposits on the throttle body and surrounding intake passages alter the cross-sectional area of the air passage, preventing the control unit from precisely regulating idle air intake. This also results in an overly rich or lean mixture, causing unstable idling. 3. Faulty intake system actuators—the engine's intake system has many components, such as the throttle motor, idle speed control motor, duty cycle solenoid valve, mass airflow sensor, and intake pressure sensor. Malfunctions or damage to these parts can cause unstable idling.
17
1
Share

How Many Kilometers Should the Transmission Oil of a Truck Be Replaced?

Truck transmission oil is generally replaced every 80,000 to 100,000 kilometers. The structure and configuration of trucks from different brands vary, so it is advisable to refer to the maintenance manual provided with the vehicle for specific replacement intervals. Relevant information about transmission oil is as follows: 1. If the transmission oil is not replaced for a long time, it will age, increasing the load on the transmission and accelerating its aging, which will affect the service life of the transmission. 2. If the transmission oil is not replaced for an extended period, the oil will deteriorate and age, and the excess heat in the transmission cannot be dissipated through the fluidity of the oil. In severe cases, this can cause the transmission temperature to rise, potentially damaging the transmission components.
3
3
Share

What Causes the Forced Restart of the LaCrosse's Central Control Screen?

Relevant causes and solutions for the forced automatic restart of the central control screen are as follows: 1. This situation may occur because the screen has been used for too long, and many fragmented files have occupied the system memory. 2. You can restore the central control screen to its initial state by using the reset button. Find a toothpick or another similar hard object to insert and press the RST hole on the central control screen. 3. The RST hole is the reset button, which can restore the screen to its initial state. If this method does not work, you can try reinstalling the system. 4. If the touch screen does not respond after restoring the initial state, it may be due to issues with the screen's contact points, requiring the replacement of a new central control screen.
17
0
Share

What Causes the Failure of the Lavida Sunroof Switch?

Lavida sunroof switch failure is generally caused by issues with the fuse, motor, or wiring. The most common reasons for car sunroof malfunction are as follows: 1. Sunroof wiring fault. 2. Damage to the sunroof drive motor. 3. Severe lack of lubrication in the sunroof sliding track, causing the sunroof seal to stick to the car body. 4. Obstruction by foreign objects in the sunroof track. If the Lavida sunroof switch fails, the sunroof control button can be initialized with the following steps: 1. Turn on the ignition switch and ensure the car sunroof is fully closed. If the sunroof cannot be closed with normal switch operation, you can use electrical forced closing (press and hold the marked end of the switch when it is in the closed position) or mechanical forced closing (use the crank on the decorative cover to manually close the sunroof motor). 2. Press the sliding switch or tilt switch and operate the sliding sunroof as follows: tilt up for about 1 second, tilt down to slide open, and slide to close. The sunroof control button initialization is now complete.
19
5
Share

Where is the coolant filler port on the BMW 5 Series?

The coolant filler port on the BMW 5 Series is located to the left of a black reservoir on the left side of the engine. It can be seen by opening the hood, and the coolant can be added by opening the reservoir cap. Related details are as follows: 1. The full name of coolant is antifreeze coolant, which has antifreeze functionality. Coolant is not only used in winter but also throughout the year. Whether it's cold or hot, the car cannot operate without coolant. Proper use of coolant not only protects the engine cooling system and improves heat dissipation but also enhances engine efficiency and extends its service life. 2. The coolant in the BMW 5 Series is generally replaced once a year, or for vehicles with shorter operating times, it can be replaced every two years or every 30,000 kilometers. When adding coolant to the BMW 5 Series, the fluid level should be between the MAX and MIN indicator lines.
10
0
Share

Where Does the Passenger Airbag Deploy From?

Generally, the passenger airbag in a car deploys from the right side panel of the dashboard. In the event of a sudden emergency, the airbag can quickly deploy to protect the front-seat passenger, preventing secondary injuries and effectively reducing the injury rate of occupants. Relevant information about automotive safety devices is as follows: 1. Seat belts are one of the most important safety features in a car. In addition to seat belts, rearview mirrors, airbags, and anti-lock braking systems (ABS) are crucial for safe driving. 2. During a collision, seat belts immediately secure the occupant to the seat. Once the peak impact force subsides, the airbag deploys to protect the driver and passengers, while the seat belt slightly loosens to provide optimal restraint.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.