How to Deal with GW250 Chain Noise?

1 Answers
DiAsher
07/25/25 10:38am
In this situation, it is often caused by the motorcycle being left outside and exposed to rain, leading to chain rust. Simply apply lubricating oil to the chain and rotate it a few times. Check if there is any warping or denting in the chain case. If so, it is necessary to completely remove the case and restore the warped or dented parts.
Was this review help?
14
3
Share
More Forum Discussions

What is the reason for a slight gap in the half shaft causing a knocking sound on bumpy roads?

A slight gap in the half shaft causing a knocking sound on bumpy roads is due to loose half shaft screws, which result in a loose connection at the half shaft joint, producing abnormal noise. There are usually two reasons for abnormal noise in a car's half shaft: 1. Loose half shaft screws causing a loose connection at the half shaft joint, leading to abnormal noise (this can be directly observed). 2. Broken teeth on the differential planetary gears, where the noise typically becomes more prominent when turning left or right or during normal driving. Additional relevant information is as follows: 1. If a car's half shaft is damaged, it can cause abnormal shaking while driving and produce abnormal noises. If the half shaft is damaged, it should be replaced immediately. It is recommended to choose original equipment manufacturer (OEM) products when replacing the half shaft and to have it installed by a professional shop. 2. The half shaft is the component that transmits power to the wheels. Without a half shaft, power cannot be transmitted to the wheels. The half shaft may experience deformation or breakage.
11
4
Share

Why Does a Ticking Sound Occur After Replacing Spark Plugs?

Replacing spark plugs resulting in a ticking sound is due to the spark plugs not matching the vehicle. Relevant explanations are as follows: 1. The gap between the electrodes of a spark plug significantly affects its performance. If the gap is too small, the spark will be weak and prone to carbon buildup and leakage. If the gap is too large, the required breakdown voltage increases, making the engine harder to start and more likely to misfire at high speeds. Therefore, the spark plug gap should be appropriate, generally 0.7-0.8mm for battery ignition systems, with some spark plugs having gaps exceeding 1.0mm. 2. When replacing spark plugs, it is crucial to use spark plugs of the same size. During installation, using a self-purchased or vehicle-provided spark plug socket with a short handle can easily result in insufficient installation torque. If the torque is too low, the spark plug sealing gasket may not be fully compressed, leading to poor cylinder sealing. Over time, this can cause excessive cylinder temperatures and premature ignition.
6
5
Share

What is the API-SP grade of engine oil?

API-SP engine oil is the highest quality grade of oil suitable for gasoline engines. API refers to the American Petroleum Institute, 'S' indicates that the oil is only suitable for gasoline engines, and 'P' represents the quality grade of the oil, with 'P' being the highest level in the oil grading system. Engine oils are categorized into those suitable for gasoline engines and those for diesel engines, distinguished by 'S' and 'C' respectively. Oils starting with 'S' are specifically for gasoline engines, with grades including SA, SB, SC, SD, SE, SF, SG, SH, SJ, SL, SM, SN, and SP. Diesel engine oils start with 'C', with grades such as CA, CB, CC, CD, CE, CF, CF-4, CG-4, CH-4, CI-4, and CJ-4. For both gasoline and diesel vehicles, each subsequent letter indicates a higher grade of engine oil, with generally superior performance compared to the previous one. Engine oil serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and act as a shock absorber. When selecting engine oil, refer to the vehicle's maintenance manual, which typically specifies the required oil grade. It is advisable to choose high-quality oil from reputable manufacturers, preferably specifically designed for your vehicle. Avoid using counterfeit or substandard oils, as they may accelerate engine wear and shorten the engine's lifespan.
16
4
Share

What are the differences between the new Macan and the old model?

There are differences between the new Macan and the old model in terms of appearance and chassis. Appearance: The new model features a redesigned front bumper with enlarged high-angle air intakes, and the turn signals have been relocated to the bottom instead of the top. The new model adopts an 11-inch infotainment screen, replacing the old 7-inch screen. Some new optional equipment has been introduced in the cockpit, such as the GT sports steering wheel and a traffic assist system that enables semi-autonomous driving, including automatic acceleration, braking, and steering, as well as a shorter 0-100 km/h acceleration time. Chassis: While the powertrain remains unchanged, the new Macan's chassis has been adjusted to improve driving dynamics. The Macan is Porsche's entry-level SUV model, built on the same MLB platform as the Audi Q5. The Porsche Macan is based on the Audi Q5 platform and will be available with three powertrain options in the future. The entry-level model is equipped with a 2.0-liter four-cylinder turbocharged engine with a maximum power output of 173 kW, while higher-spec models feature a 3.0-liter V6 twin-turbocharged engine with a maximum power output of 250 kW. Additionally, the new model is highly likely to share the Q5's hybrid powertrain system.
20
0
Share

What is the fuel tank capacity of the Trumpchi GS4 in liters?

The fuel tank capacity of the Trumpchi GS4 is 50 liters. The Trumpchi GS4 is a compact 5-door, 5-seat SUV with body dimensions of 4545mm in length, 1856mm in width, and 1668mm in height, with a wheelbase of 2680mm. The luggage compartment volume ranges from 470 to 1560 liters. The Trumpchi GS4 is equipped with a 1.5T turbocharged engine, with a maximum torque speed range of 1700 to 4000 rpm and a maximum power speed of 5000 rpm. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using multi-link independent suspension.
20
1
Share

Where is the Buick TC Button Switch Located?

Buick TC button switch location is divided into the following two situations: 1. For older Buick LaCrosse models, the TC button switch is located below the gear shift lever. 2. For newer Buick LaCrosse models, the TC button shares the same button as the ESP system and is located on the center console. More relevant information is as follows: 1. When a Buick vehicle displays "TC," it indicates a malfunction in the traction control system. In this case, you should visit a Buick 4S dealership to have a technician read the fault code, identify the cause and location of the fault, and proceed with immediate repairs. 2. The traction control system is a driving assistance system in vehicles that controls the power delivered to the drive wheels. This system activates only when the drive wheels slip. If the drive wheels slip, the traction control system will limit the engine's power output and apply braking to the slipping drive wheels to prevent excessive slippage. 3. When the traction control system is active, the TC light on the dashboard will flash. The TC light remains off when the system is not in use.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.