How to Deal with Grooves on the Surface of Brake Discs?
2 Answers
Here are the methods to deal with grooves on the surface of brake discs: 1. If the grooves are not deep. You can remove the brake pads and smooth them with coarse sandpaper, then reinstall the polished brake pads. During use, the grooves on the brake discs can be eliminated. 2. If the grooves on the brake discs are deep. You can remove the brake discs and take them to a lathe workshop to grind off the grooves, which is known as resurfacing the brake discs. After installation, they can continue to be used. 3. If the grooves reach the wear limit. The brake discs need to be replaced. The following are the reasons for grooves on brake discs: 1. The brake pads are too hard, or the brake pads are severely worn, exposing metal parts that directly rub against the brake discs, causing grooves. At this time, there should also be a screeching sound. 2. There are sand particles or metal debris between the brake pads and discs, causing grooves after friction. 3. Normal wear of the brake discs. The maximum wear limit for brake discs is 2 millimeters. After reaching the limit, it is necessary to replace the brake discs with new ones.
Recently I noticed grooves on my brake discs. I measured the depth myself - if shallow, the discs can be resurfaced (also called 'turning') to restore a smooth surface. This requires professional tools though, as uneven grinding can be dangerous. For deep grooves, replace the discs immediately without hesitation - safety first. I also checked the brake pads, as sometimes hard particles embedded in pads can cause scoring. Using higher quality pads can prevent recurrence. Avoid harsh braking in daily driving and clean off dust buildup during maintenance - these small habits extend disc life. I recommend finding a reputable repair shop rather than DIY attempts which often go wrong. Remember: brake issues are never trivial. Addressing problems early prevents bigger troubles.