How to Deal with Gear Shift Jerking in Skoda Octavia Transmission?

1 Answers
LaVincent
07/30/25 10:36am
Here are the methods to eliminate jerking in Skoda Octavia: 1. Check if the transmission temperature is normal. If not, inspect the transmission cooling system. 2. Replace the transmission fluid, which should be changed every 2 years or 40,000 kilometers. 3. Check if the internal valve body of the transmission is damaged. Reasons for gear shift jerking: 1. Mismatch between engine speed and gear. 2. Mismatch between vehicle speed and gear. 3. Quality issues with the transmission, which may result in gears not engaging, gear wear, or the transmission failing to properly control gear meshing, leading to sudden increases in engine speed.
Was this review help?
19
3
Share
More Forum Discussions

What is the tire size of the Haval H2?

The tire specifications of the Great Wall Haval H2 are 235/55-R18, equipped with Giti brand tires. It is a high-performance SUV tire that balances handling, comfort, and safety. It utilizes a high-dispersion white carbon black nano-level formula material, effectively reducing rolling resistance during driving, ensuring wet road grip, and helping to lower fuel consumption. The advantages of the Haval H2 Giti tires are as follows: 1. High load-bearing capacity and excellent anti-burst performance, making it an internationally renowned brand. 2. High cost-performance ratio; among tires of the same price range, GT tires have better wear resistance. The disadvantages of the Haval H2 Giti tires are as follows: 1. Heat dissipation is not as good as that of internationally renowned brands, and bulging may occur in later stages without causing blowouts, with more than half of the tread pattern being compensable. 2. The tires are in short supply.
10
0
Share

What is the model of the Elantra battery?

The Elantra battery model is 55D23L, which is 60AH with a voltage of 12V. The car battery refers to the storage battery, an essential part of the vehicle, which can be divided into traditional lead-acid batteries and maintenance-free batteries. The automotive lead-acid battery mainly consists of positive (negative) plates, separators, electrolyte, case shell, connecting strips, and terminal posts. The Elantra is an important model from Hyundai. In terms of body dimensions, it measures 4495mm in length, 1720mm in width, and 1425mm in height, with a wheelbase of 2610mm. The Elantra is equipped with two types of engines: 1.6-liter and 1.8-liter. The 1.6-liter model features an inline 4-cylinder double overhead camshaft, 16-valve engine.
20
3
Share

What engine does the Changhe Q7 have?

Changhe Q7 is equipped with a 1.5-liter turbocharged engine, delivering 150 horsepower and a maximum torque of 200 Nm. This engine features multi-point electronic fuel injection technology and uses an aluminum alloy cylinder head. The engine is paired with either a 6-speed manual transmission or a CVT transmission. Changhe Q7 is a compact SUV under BAIC Changhe, offering 5-seat and 7-seat versions. The vehicle's side profile features a floating roof design, with the A, B, C, and D pillars all treated with black paint, creating an excellent visual effect. In terms of body dimensions, the Changhe Q7 measures 4655mm in length, 1855mm in width, and 1720mm in height, with a wheelbase of 2670mm.
1
0
Share

Why does the Honda CR-V engine shake when warm?

Honda CR-V engine shaking when warm is caused by ignition system issues and unstable oil pressure. Below are the reasons and solutions for Honda CR-V engine shaking. Severe engine carbon buildup: The most common cause of car shaking is a dirty throttle body or excessive carbon deposits on the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. In this situation, the engine will only start easily once the carbon deposits have absorbed enough gasoline to become saturated. After starting, the gasoline adsorbed on the carbon deposits is then drawn into the combustion chamber by the engine's vacuum suction, making the air-fuel mixture too rich. This fluctuation between lean and rich mixtures causes idle shaking after a cold start. Aging engine components: Car shaking can also be related to worn engine mounts. Engine mounts act as the engine's shock absorption system, responsible for absorbing minor vibrations during operation. If the engine mounts are faulty, these vibrations will transfer to the steering wheel and the cabin, causing shaking at idle.
10
1
Share

What is the operating method for the flagship 600 horsepower gear?

Flagship 600 has different handling characteristics, engine power, and transmission gears. The rear axle differentiation for the flagship 600 horsepower: the difference between the 3.42 and 3.64 ratios lies in handling characteristics, engine power, and transmission gears. With the same engine, the 3.64 ratio allows for faster speed. In vehicles, the ratio equals engine speed/drive wheel speed, also equals drive wheel torque/engine torque, and further equals the transmission gear ratio multiplied by the final drive ratio. The larger the ratio, the faster the speed. The gear shifting process during driving: during the starting phase, put the gear into neutral, depress the clutch, turn on the ignition switch, engage first gear, slowly release the clutch while coordinating with the throttle to start the car. During the acceleration process after the car starts, as the engine speed increases, engage the corresponding gear according to different speeds. Note: usually, when the speed increases to a certain level, the engine will produce abnormal noise, at which point you must shift up.
14
5
Share

How to Understand Parallel Imports?

Parallel imported vehicles refer to cars imported directly from the product's country of origin by importers other than the domestic general distributor. Parallel imports can be understood as a form of purchasing on behalf, as opposed to regular imported vehicles. In other words, imported cars are divided into two types: parallel imports and regular imported vehicles. Regular imported vehicles, commonly referred to as China-spec cars, are those purchased through 4S dealerships. Below are the differences between parallel imported vehicles and regular imported vehicles: 1. Parallel imported vehicles are cheaper. Since they bypass the general distributor and eliminate middlemen, their prices are naturally much lower, typically by about 10%~20%. 2. Parallel imported vehicles offer more model choices. They include models not available through domestic production or regular imports. Depending on the import region, they are further categorized as "U.S.-spec cars," "Euro-spec cars," etc., all of which are authentic. 3. In terms of subsequent usage and after-sales services, regular imported vehicles are better than parallel imports. Regular imported vehicles come with a three-guarantee policy from 4S dealerships, while parallel imports do not, and owners need to purchase insurance separately.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.